|
Top Mount Ring SS Cup Holder - 1-Drink - Base Mount
Top mount drink holders are great for console and table tops. Our top mount drink holder allows for 1/4" wood screw or bolt to fasten to the console or table easily. The ring diameter is large enough for a can koozie, bottle of wine, or a mug. The opening in the ring allows for a cup with a handle to slide in and out easily.
Produced from durable Stainless Steel. Lifetime Guaranty.
Specifications:
Style: 1-Drink
Height: 2-3/4"
Ring ID: 3-9/16"
Opening: 1-1/8"
Fastener: 1/4" - 20
Material: 304 SS
|
36.72 |
|
|
Top Mount Ring SS Cup Holder - 2-Drink - Base Mount
Top mount drink holders are great for console and table tops. Our top mount drink holder allows for 1/4" wood screw or bolt to fasten to the console or
table easily. The ring diameter is large enough for a can koozie, bottle of wine, or a mug. The opening in the ring allows for a cup with a handle to
slide in and out easily.
Produced from durable Stainless Steel. Lifetime Guaranty.
Specifications:
Style: 2-Drink
Height: 2-3/4"
Ring ID: 3-9/16"
Opening: 1-1/8"
Fastener: 1/4" - 20
Material: 304 SS
|
55.31 |
|
|
Top Mount Ring SS Cup Holder - 3-Drink - Stud Mount
Top mount drink holders are great for console and table tops. Our stud mount cup holders allow for blind fastening for a neat look on the top of the console or table. The ring diameter is large enough for a can koozie, bottle of wine, or a mug. The opening in the ring allows for a cup with a handle to slide in and out easily.
Produced from durable Stainless Steel. Lifetime Guaranty.
Specifications:
Style: 3-Drink
Height: 1-3/4"
Ring ID: 3-9/16"
Opening: 1-1/8"
Stud: 3/8"
Material: 304 SS
|
64.44 |
|
|
Top Mount Ring SS Cup Holder - 4-Drink - Stud Mount
Top mount drink holders are great for console and table tops. Our stud
mount cup holders allow for blind fastening for a neat look on the top of
the console or table. The ring diameter is large enough for a can koozie,
bottle of wine, or a mug. The opening in the ring allows for a cup with a
handle to slide in and out easily.
Produced from durable Stainless Steel. Lifetime Guaranty.
Specifications:
Style: 4-Drink
Height: 1-3/4"
Ring ID: 3-9/16"
Opening: 1-1/8"
Stud: 3/8"
Material: 304 SS
|
81.41 |
|
|
Johnson 10-35157-1 Engine Cooling Pump
FEATURES
Pump Body:
Bronze
Ports:
Threaded or Hose
Cam:
Full or 1/2
Impeller:
Neoprene
Shaft Seal:
2 Lip Seals
Drive:
Flange Mounted to Engine.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
Requires (2) Johnson 01-43238 Clamps to Mount.
Johnson- Engine Cooling Pump Slip-Fit Ports Full Cam F35B-9, Volvo 858065
|
364.85 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
RAM Drink Cup Holder Mount w/ Diamond Base
Part #: RAM-B-102-132u
A favorite world wide, the RAM self leveling drink cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.
Included is a cozy, self leveling drink cup, double socket arm and diamond plate that contains the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with an adjustment point at the diamond plate and base of the cup holder.
Ball Size:
1" Rubber "B" Ball Size
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
|
32.59 |
|
|
The RAM-B-132SU consists of a 3.25" suction cup locking base and self leveling drink cup holder. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your handheld device in your vehicle. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
40.96 |
|
|
Inteliplug Pro Captive Drain Plug & Garboard Assembly
The Seaview Inteliplug Pro is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, and 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
|
28.80 |
|
|
Inteliplug ProX Captive Drain Plug, Garboard Assembly, Sensor & Deutsch Plug Pigtail
The Seaview Inteliplug ProX is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
ProX comes with a hermetically sealed aeronautical grade sensor with Deutsch plug pigtail
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
|
52.80 |
|
|
Inteliplug ProXT Captive Drain Plug, Garboard Assembly, Sensor & Deutsch Plug Pigtail with Plug-and-Play Harness
The Seaview Inteliplug ProXT is a transom drain plug reimagined and engineered to be easy to use and impossible to lose.
Features:
ProXT comes with a hermetically sealed aeronautical grade sensor with a Deutsch plug pigtail
Ergonomic design so you don’t need tools
Spring-loaded captive cap (stays attached)
A direct replacement for the bronze and stainless traditional style garboards (520040, 520042, 520060)
Approved for all marine environments including saltwater.
Manufactured from durable marine-grade ABS + 15% fiber
NPT thread and a backup O-ring - watertight fit
2" outer diameter - fits in the same spot as your current garboard drain plug
Engineered transom gasket - no messy silicone needed
3 large individual drain cavities - plenty of flow area
Sensor with Deutsch DT04-2P plug pigtail including plug-and-play wire harness and alarm panel
|
129.60 |
|
|
RAM® Stubby™ Cup Holder Mount with Round Plate
The RAM Stubby™ cup holder base is a low-profile option of our cup holder mounting base. The durable composite shell construction and flexible support fins can be trimmed to size make this cup holder base a portable and versatile solution. The mount is designed with a patented RAM 1" diameter rubber ball and this kit includes a standard-length arm as well as a round base for supporting many of our device cradles. The RAM ball and socket system allows for articulation at both ends of the double socket arm creating almost infinite adjustment and perfect viewing angles.
Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5".
Specifications:
Material: High Strength Composite
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
|
37.88 |
|
|
RAM® Stubby™ Cup Holder Mount with Diamond Plate
The RAM Stubby™ cup holder base is a low-profile option of our cup holder mounting base. The durable composite shell construction and flexible support fins can be trimmed to size make this cup holder base a portable and versatile solution. The mount is designed with a patented RAM 1" diameter rubber ball and this kit includes a standard-length arm as well as a diamond base that can attach to many of our device cradles. The RAM ball and socket system allows for articulation at both ends of the double socket arm creating almost infinite adjustment and perfect viewing angles.
Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5".
Specifications:
Material: High Strength Composite
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
|
37.30 |
|
|
RAM® Stubby™ Cup Holder Ball Base
The RAM Stubby™ cup holder base is a low-profile option of our cup holder mounting base. The durable composite shell construction and flexible support fins can be trimmed to size making this cup holder base a portable and versatile solution. The mount is designed with a patented RAM 1" diameter rubber ball. The RAM ball and socket system allow for articulation at both ends of the double socket arm creating almost infinite adjustment and perfect viewing angles.
Compatible with any vehicle cup holder with an inside diameter range of 2.57" to 3.5".
Specifications:
Material: High Strength Composite
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects a product packaged in a polybag.
|
26.78 |
|