|
For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.
|
1.29 |
|
|
For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.
|
1.09 |
|
|
For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.
|
16.99 |
|
|
For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.
|
21.99 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
1-1/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - Black
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 1-1/4" / (mm) 31.8
Outer Diameter: (inch) 1.40" / (mm) 32
Working Pressure: (Psi) 70 / (bar) 4.8
Bend Radius: (inch) 1.5" / (mm) 38
Weight: (Lb./50ft.) 35 / (Kg/m) 15.7
*Burst Pressure is 4 x Working Pressure
|
425.15 |
|
|
3/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - Black
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 3/4" / (mm) 20
Outer Diameter: (inch) 1.15" / (mm) 29
Working Pressure: (Psi) 100 / (bar) 6.9
Bend Radius: (inch) 1" / (mm) 25
Weight: (Lb./50ft.) 23 / (Kg/m) 10.3
*Burst Pressure is 4 x Working Pressure
|
365.15 |
|
|
For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.
|
129.00 |
|
|
For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.
|
189.00 |
|
|
Heavy duty, multi purpose white PVC sanitation system hose. Perfect for head intake, head to holding tank, bilge pump and drain, discharge and pump-out. Smooth inside and outside providing excellent clamping. Flexible PVC with rigid PVC helix which provides excellent collapse resistance. FDA approved.
|
255.00 |
|
|
Sierra fuel pumps and replacement parts for sterndrive & I/O engines.
|
264.19 |
|
|
Walbro FRB-16-2 24V Fuel Pump 6-8 Psi
Outlet Check Valve: None
Voltage: 24V DC
Weight: 1.83 lb
Magnetic Trap: Yes
Minimum Flow Rate: 43 gph
Dry Lift: 48"
Current Draw: 1.7 Amp
Inlet/Outlet: 1/4-18 NPSF
Fuse: 5A
Inlet Filter Screen: 70 Micron
Service Life: 18,000+ hr
Pressure: 6.0 - 8.0 psi
The FRB is an advanced electric fuel pump with internal circuitry allowing it to operate at a variable frequency.
When turned on, it will cycle as long as there is a demand for fuel, but when fuel demand decreases, the pump slows down as it builds pressure in the fuel delivery line - until the pump's rated maximum pressure is reached, and the pump stops.
These FRB pumps are especially suitable for applications where battery life, low noise, and best durability are important.
Not recommended for applications such as heater or stove systems as output pressures are too high.
For heater and stove fuel pumps, use the lower pressure Walbro FRD Series. See Related Products, below.
The FRB is designed to serve as a primary pump (replacing a mechanical fuel pump) or as an auxilliary fuel pump (assisting the existing pump) for internal combustion engines.
A common application is supplying fuel to the those diesel refrigeration units mounted high on tractor-trailer trucks.
These pumps incorporate a new piston mechanism which, unlike rubber diaphragms, is not affected by modern, high-tech fuel blends.
• Pump cycles only when fuel is demanded - so the pump cycles on and off
• The non-adjustable maximum output pressure is factory pre-set in the ranges specified in the table, below
• Continuous duty life (diesel fuel): >18,000 hours
• Can run dry for up to 4 hours
• Flow rates as high as 60 gph, but 30 gph is a more typical maximum
• Compatible with all commercially available pump grade gasoline, gasoline-alcohol blends, diesel, and bio-diesel fuels
• Self-priming to 4 feet
• Current draw averages less than 2 amps
• USCG 16623-1 and 16623-2 approved; ignition protected
• Anodized, corrosion protection coating passes 1,000 hr salt spray test - suitable for marine applications
• Replaceable internal 70 micron mesh filter
• Magnetic trap for ferrous contaminants
• Inlet (lower, side)/Outlet (top): 1/4-18 NPSF (Dryseal American National Standard Straight Pipe Thread) — will accept NPT tapered fittings without leaking, thread sealant recommended
• Dimensions: 5.83"H x 2.76"Dia.
• Note - a suffix number (typically -1 or -2) in part number refers to type of packaging
• Made in USA
NOTE — Although the included instructions indicate that FRB pumps are supplied with hose clamps, at this time (5/8/13), these pumps do not include any installation fittings.
Technical
Selecting among the Walbro FR Series electric fuel pumps:
• All the FR electric pumps provide fuel until the fuel demand decreases, or flow is restricted - but they have different mechanisms for doing so.
FR pumps will cycle (pump) until they build up the pressure (head) in the outflow line - with an accompanying decrease in fuel flow - and reach their factory preset maximum pressure.
At this point, constant frequency pumps like the FRA will continue cycling - but no fuel will flow.
Variable frequency pumps, like the FRB and FRD, will slow and eventually stop cycling as the pressure builds.
If the pressure on the outflow side of the pump drops, both types of pump will start supplying fuel again.
• Choosing an FR Series pump is often less dependent on the application, and more a matter of user preference:
FRA pumps are lower cost, basic models.
They have no built-in filter, and their constant cycling means electric current draw is constant - regardless of output, they are always making noise, they typically have a shorter lifespan (higher wear), and they can wear unevenly as the stroke can be shortened when operating near their maximal pressure.
FRB and FRD pumps have a more expensive variable frequency circuit board, always use their full stroke length - so wear is evenly distributed, do not always operate at full capacity/maximal cycling — so less wear, longer life, less noise, and lower average current draw.
Additionally, the FRB models include a built-in/replaceable 70 micron mesh filter, so the user doesn't need to supply a pre-filter.
• What the FR fuel pump is designed to do:
In carbureted applications - The FRA and FRB fuel pumps self-regulate to their maximum output pressure when the carburetor bowl is full, and respond to float movement in the carburetor as required.
When the engine demands more fuel, the pump increases its flow rate.
When the engine demand drops, the pump reduces its flow rate.
In diesel applications - The FRA and FRB pumps will deliver fuel to the diesel injector pump, assuring a positive pressure at the injector pump inlet.
These pumps are designed to refill diesel filters after service or replacement.
In transfer applications, including fuel polishing, FRA and FRB pumps run continuously, as long as electrical power is supplied to the pump, and output back pressure is low.
In diesel heater and stove applications, the task-specific FRD pumps will slow their cycling rate to deliver only the fuel required by the stove fuel metering valve ("carburetor").
FRD pumps can also fill day tanks in gravity feed installations.
• Complete list of approved fuels for FR pumps: Unleaded regular gasoline, premium gasoline, gasoline-alcohol blends, diesel fuel, bio-diesel, Stoddard solvent, E85.
|
284.51 |
|
|
Jabsco 1673-1003 Pump 1/2" Ped Mt
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Impeller: Nitrile
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene or Nitrile (Oil Resistant)
Shaft Seal: Lip Seal or Mechanical seal, Buna N
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Nitrile Impeller
|
447.01 |
|
|
Jabsco 1673-2001 Pump 1/2" Npt Neo W/Mech Sl
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene
Shaft Seal: Mechanical seal
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of a flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Mechanical Seal Neoprene Impeller
|
543.35 |
|
|
Jabsco 1673-1001 Flexible Impeller Pedestal Pump
Pump Body: Bronze
Port Size: 1/2" NPT
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene or Nitrile (Oil Resistant)
Shaft Seal: Lip Seal or Mechanical seal, Buna N
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Neoprene Impeller, Kohler 15HP
|
447.01 |
|