|
Use where bends or long lengths are required, such as engine intake, wet exhaust connections, bilge pump intake/discharge, scupper lines, toilet intake/discharge, holding tank vent or pumpout. Black synthetic rubber tube and cover. Reinforced with wire helix imbedded within plies of HD synthetic cord. Resistant to exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Abrasion resistant, odor permeation resistant. Temperature range -20° to +200°F continuous, +250° intermittent. Meets SAE J2006 Type R2 and double ozone resistance requirements.
|
129.99 |
|
|
Use where bends or long lengths are required, such as engine intake, wet exhaust connections, bilge pump intake/discharge, scupper lines, toilet intake/discharge, holding tank vent or pumpout. Black synthetic rubber tube and cover. Reinforced with wire helix imbedded within plies of HD synthetic cord. Resistant to exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Abrasion resistant, odor permeation resistant. Temperature range -20° to +200°F continuous, +250° intermittent. Meets SAE J2006 Type R2 and double ozone resistance requirements.
|
139.99 |
|
|
2" Bronze Pedestal Pump
Flow rate: Nominal 60 gallons/min at 1500 rpm
Self-priming from dry up to 7.8ft
Features:
Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
Easy to service and maintain.
Inexpensive to buy and operate.
Will tolerate abrasive wear (this may affect performance - seek advice from your distributor).
Handles hard and soft solids without clogging.
Can pump in either direction.
Will not airlock.
APPLICATIONS
MARINE:
Engine cooling, pumping bilges, wash downs, circulating water in bait tanks, utility dock side pump.
INDUSTRIAL:
Circulating and transferring, Velocity-mixing, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Inks, Dyes, Alcohol, Tanning Liquors, Glycerin, Brine, etc.
FARMING:
Pumping water for stock, Pumping water from shallow wells and cisterns.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1284.94 |
|
|
4 Blade aluminum propeller for 9.9-25 horsepower engines with 10 tooth spline and thru hub exhaust. 3" gear case.
|
89.99 |
|
|
4 Blade aluminum propeller for 15-35 horsepower engines with 14 tooth spline and thru hub exhaust. 3" gear case.
|
89.99 |
|
|
4 Blade aluminum propeller for Mariner 25-30 horsepower and Yamaha 20-30 horsepower engines with 10 tooth spline and thru hub exhaust. 3" gear case, Japan origin.
|
89.99 |
|
|
4 Blade aluminum propeller for BRP 25-30 horsepower and Suzuki 20-30 horsepower engines with 10 tooth spline and thru hub exhaust. 3" gear case, Japan origin.
|
89.99 |
|
|
4 Blade aluminum propeller for 25-30 horsepower engines with 10 tooth spline and thru hub exhaust. 3" gear case, Japan origin.
|
89.99 |
|
|
Sternflex 2" rigging hose used to cover harness and bracket mounted hoses on outboard engines. Polyethylene co-polymer wall with an integral polyethylene helix. Resistant to abrasion, crushing and UV. 3" bend radius.
|
4.79 |
|
|
Heavy Wall Heat Shrink Tubing - 1" x 12" - 2-Pack - Black
Package of 2 Black 12"(30.5cm) long sections with a 1"(25mm) diameter that shrinks to 3/8"(9mm)
Wire Range: 2-4/0 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
3:1 Ratio
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.33 |
|
|
Heavy Wall Heat Shrink Tubing - 1" x 12" - 2-Pack - Red
Package of 2 Red 12"(30.5cm) long sections with a 1"(25mm) diameter that shrinks to 3/8"(9mm)
Wire Range: 2-4/0 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
3:1 Ratio
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.33 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Jabsco Pump 12520-1004 Bronze 1/6Hp 115V
FEATURES
Pump Head: Bronze
Port Size: Ports are 3/8 Inch NPT Internal and 3/4 Inch GHT External.
Flow: 5.8 GPM output at 10 feet total head
Pressure: Up to 17.3 PSI
Impeller: Neoprene, Nitrile or Viton
Shaft Seal: Lip Type
Motor: 1/6hp - 115 Vac, 60 Hz. ODP Motor
1/4hp - 115 Vac, 60 Hz. TENV Motor 1725 RPM, Thermal Overload Protection, Stainless Steel Shaft, 8 foot Cord wilh 3 Prong Grounded Plug
APPLICATIONS
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
MARINE: Washdowns, utility dock side pump.
PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling.
Jabsco Bronze Utility Transfer Pump 1/6HP 115V ODP Viton Impeller
|
895.18 |
|
|
For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.
|
129.00 |
|
|
For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.
|
189.00 |
|