|
For straight connections in wet exhaust systems or engine water circulation. Black heavy walled synthetic rubber with 2 plies of synthetic cord, no imbedded wire. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and salt water. Meets SAE J2006 Type R1 requirements including double ozone resistance required by SAEJ2006. Temperature ranges from -20°F - +200°F continuous, +250°F intermittent.
|
249.99 |
|
|
For straight connections in wet exhaust systems or engine water circulation. Black heavy walled synthetic rubber with 2 plies of synthetic cord, no imbedded wire. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and salt water. Meets SAE J2006 Type R1 requirements including double ozone resistance required by SAEJ2006. Temperature ranges from -20°F - +200°F continuous, +250°F intermittent.
|
179.99 |
|
|
For straight connections in wet exhaust systems or engine water circulation. Black heavy walled synthetic rubber with 2 plies of synthetic cord, no imbedded wire. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and salt water. Meets SAE J2006 Type R1 requirements including double ozone resistance required by SAEJ2006. Temperature ranges from -20°F - +200°F continuous, +250°F intermittent.
|
219.99 |
|
|
2" Bronze Pedestal Pump
Flow rate: Nominal 60 gallons/min at 1500 rpm
Self-priming from dry up to 7.8ft
Features:
Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
Easy to service and maintain.
Inexpensive to buy and operate.
Will tolerate abrasive wear (this may affect performance - seek advice from your distributor).
Handles hard and soft solids without clogging.
Can pump in either direction.
Will not airlock.
APPLICATIONS
MARINE:
Engine cooling, pumping bilges, wash downs, circulating water in bait tanks, utility dock side pump.
INDUSTRIAL:
Circulating and transferring, Velocity-mixing, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Inks, Dyes, Alcohol, Tanning Liquors, Glycerin, Brine, etc.
FARMING:
Pumping water for stock, Pumping water from shallow wells and cisterns.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1284.94 |
|
|
3 Blade plastic propeller for BF2 Series engines.
|
27.99 |
|
|
Myers Pumps 05014A158 Gasket
RUBBER GASKET 6 3/4 X 6 1/2 X 1/8
|
14.45 |
|
|
Gunnel Mount Outrigger Holders
Size: 2.0"
Dimensions: 4 x 6 1/2
Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
872.30 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.
|
129.00 |
|
|
For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.
|
189.00 |
|
|
Jabsco 1673-1003 Pump 1/2" Ped Mt
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Impeller: Nitrile
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene or Nitrile (Oil Resistant)
Shaft Seal: Lip Seal or Mechanical seal, Buna N
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Nitrile Impeller
|
447.01 |
|
|
Jabsco 1673-2001 Pump 1/2" Npt Neo W/Mech Sl
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene
Shaft Seal: Mechanical seal
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of a flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Mechanical Seal Neoprene Impeller
|
543.35 |
|
|
Jabsco 1673-1001 Flexible Impeller Pedestal Pump
Pump Body: Bronze
Port Size: 1/2" NPT
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene or Nitrile (Oil Resistant)
Shaft Seal: Lip Seal or Mechanical seal, Buna N
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Neoprene Impeller, Kohler 15HP
|
447.01 |
|
|
MS-BB100 Marine Black Box AM/FM/BT - 2 Zone
Introducing the MS-BB100, a compact black box entertainment solution that incorporates the marine industry supported Fusion-Link protocol and Fusion's proven marine engineering skillset to deliver a boat load of tunes. An industry first, the BB100 includes an easy touch Bluetooth embedded IPx7 water resistant remote for quick audio adjustments. Supplied with a 2m (6.6ft) connection cable, the wired remote is ideally shaped for hassle free installation onto a dash or boat console.
With the Bluetooth receiver embedded into the remote we can reduce the likelihood of interference occurring between your smartphone and the receiver. Engineered for either a flush or flat mount installation, you can choose the finish to suit your vessel.
NMEA 2000 Ready for connection and control from any supported Multi-Function Display - The MS-BB100 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-BB100 with a supported chartplotter or fish finder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the BB100 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones
Fusion-Link™ makes control of your stereo easier than ever. Quickly find your favorite song, tune in to the sports or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld or Garmin watch. With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat.
Multi-Zone Control With two independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone.
Features:
Small footprint Black Box design with included Bluetooth embedded wired remote
IPx7 water resistant wired remote with quick Bluetooth pairing
Flush or flat mounting remote control installation options
Fusion-Link NMEA 2000 Ready for connection and control from any supported Multi-Function Display
Multi-Zone™ Technology – Two independent audio zones are available, each with advanced localized menu controls, including zone naming
True-Marine™ Designed and Engineered – Extensively tested to perform in the harsh marine environment
Technical Specifications:
2 Zones
200 Watts peak power
NMEA 2000 compatible
Class AB Amplifier
Rear USB connection
Dimensions (W/H/D) - 6-1/8" x 2-3/8" x 3-11/16"
Remote Dimensions (Diameter/Depth) - 2-9/16 x 3/16"
In the Box:
Media Black Box
Remote - Wired
Remote Mounting Hardware/Gasket
Remote Mounting Template
6' NMEA 2000 Drop Cable
Power Wiring Harness
Aux/Line-out Harness
Documentation
*SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
371.99 |
|
|
Walbro FRB-16-2 24V Fuel Pump 6-8 Psi
Outlet Check Valve: None
Voltage: 24V DC
Weight: 1.83 lb
Magnetic Trap: Yes
Minimum Flow Rate: 43 gph
Dry Lift: 48"
Current Draw: 1.7 Amp
Inlet/Outlet: 1/4-18 NPSF
Fuse: 5A
Inlet Filter Screen: 70 Micron
Service Life: 18,000+ hr
Pressure: 6.0 - 8.0 psi
The FRB is an advanced electric fuel pump with internal circuitry allowing it to operate at a variable frequency.
When turned on, it will cycle as long as there is a demand for fuel, but when fuel demand decreases, the pump slows down as it builds pressure in the fuel delivery line - until the pump's rated maximum pressure is reached, and the pump stops.
These FRB pumps are especially suitable for applications where battery life, low noise, and best durability are important.
Not recommended for applications such as heater or stove systems as output pressures are too high.
For heater and stove fuel pumps, use the lower pressure Walbro FRD Series. See Related Products, below.
The FRB is designed to serve as a primary pump (replacing a mechanical fuel pump) or as an auxilliary fuel pump (assisting the existing pump) for internal combustion engines.
A common application is supplying fuel to the those diesel refrigeration units mounted high on tractor-trailer trucks.
These pumps incorporate a new piston mechanism which, unlike rubber diaphragms, is not affected by modern, high-tech fuel blends.
• Pump cycles only when fuel is demanded - so the pump cycles on and off
• The non-adjustable maximum output pressure is factory pre-set in the ranges specified in the table, below
• Continuous duty life (diesel fuel): >18,000 hours
• Can run dry for up to 4 hours
• Flow rates as high as 60 gph, but 30 gph is a more typical maximum
• Compatible with all commercially available pump grade gasoline, gasoline-alcohol blends, diesel, and bio-diesel fuels
• Self-priming to 4 feet
• Current draw averages less than 2 amps
• USCG 16623-1 and 16623-2 approved; ignition protected
• Anodized, corrosion protection coating passes 1,000 hr salt spray test - suitable for marine applications
• Replaceable internal 70 micron mesh filter
• Magnetic trap for ferrous contaminants
• Inlet (lower, side)/Outlet (top): 1/4-18 NPSF (Dryseal American National Standard Straight Pipe Thread) — will accept NPT tapered fittings without leaking, thread sealant recommended
• Dimensions: 5.83"H x 2.76"Dia.
• Note - a suffix number (typically -1 or -2) in part number refers to type of packaging
• Made in USA
NOTE — Although the included instructions indicate that FRB pumps are supplied with hose clamps, at this time (5/8/13), these pumps do not include any installation fittings.
Technical
Selecting among the Walbro FR Series electric fuel pumps:
• All the FR electric pumps provide fuel until the fuel demand decreases, or flow is restricted - but they have different mechanisms for doing so.
FR pumps will cycle (pump) until they build up the pressure (head) in the outflow line - with an accompanying decrease in fuel flow - and reach their factory preset maximum pressure.
At this point, constant frequency pumps like the FRA will continue cycling - but no fuel will flow.
Variable frequency pumps, like the FRB and FRD, will slow and eventually stop cycling as the pressure builds.
If the pressure on the outflow side of the pump drops, both types of pump will start supplying fuel again.
• Choosing an FR Series pump is often less dependent on the application, and more a matter of user preference:
FRA pumps are lower cost, basic models.
They have no built-in filter, and their constant cycling means electric current draw is constant - regardless of output, they are always making noise, they typically have a shorter lifespan (higher wear), and they can wear unevenly as the stroke can be shortened when operating near their maximal pressure.
FRB and FRD pumps have a more expensive variable frequency circuit board, always use their full stroke length - so wear is evenly distributed, do not always operate at full capacity/maximal cycling — so less wear, longer life, less noise, and lower average current draw.
Additionally, the FRB models include a built-in/replaceable 70 micron mesh filter, so the user doesn't need to supply a pre-filter.
• What the FR fuel pump is designed to do:
In carbureted applications - The FRA and FRB fuel pumps self-regulate to their maximum output pressure when the carburetor bowl is full, and respond to float movement in the carburetor as required.
When the engine demands more fuel, the pump increases its flow rate.
When the engine demand drops, the pump reduces its flow rate.
In diesel applications - The FRA and FRB pumps will deliver fuel to the diesel injector pump, assuring a positive pressure at the injector pump inlet.
These pumps are designed to refill diesel filters after service or replacement.
In transfer applications, including fuel polishing, FRA and FRB pumps run continuously, as long as electrical power is supplied to the pump, and output back pressure is low.
In diesel heater and stove applications, the task-specific FRD pumps will slow their cycling rate to deliver only the fuel required by the stove fuel metering valve ("carburetor").
FRD pumps can also fill day tanks in gravity feed installations.
• Complete list of approved fuels for FR pumps: Unleaded regular gasoline, premium gasoline, gasoline-alcohol blends, diesel fuel, bio-diesel, Stoddard solvent, E85.
|
284.51 |
|