For straight connections in wet exhaust systems or engine water circulation. Black heavy walled synthetic rubber with 2 plies of synthetic cord, no imbedded wire. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and salt water. Meets SAE J2006 Type R1 requirements including double ozone resistance required by SAEJ2006. Temperature ranges from -20°F - +200°F continuous, +250°F intermittent.

Black synthetic rubber tube and cover reinforced with double wire helix imbedded between plies of synthetic cord. Abrasion resistant and resistant to exhaust fumes, ozone, mild chemicals, antifreeze and salt water. Primarily used for wet exhaust connections with significant bends, engine intake and scupper lines. Temperature ranges from -20° - +200°F continuous, +250°F intermittent. Hose meets SAE J2006 Type R2 standards and has double the ozone resistance required.

For straight connections in wet exhaust systems or engine water circulation. Black heavy walled synthetic rubber with 2 plies of synthetic cord, no imbedded wire. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and salt water. Meets SAE J2006 Type R1 requirements including double ozone resistance required by SAEJ2006. Temperature ranges from -20°F - +200°F continuous, +250°F intermittent.

For straight connections in wet exhaust systems or engine water circulation. Black heavy walled synthetic rubber with 2 plies of synthetic cord, no imbedded wire. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and salt water. Meets SAE J2006 Type R1 requirements including double ozone resistance required by SAEJ2006. Temperature ranges from -20°F - +200°F continuous, +250°F intermittent.

WaterBuster® Portable Pump Part #: 4140-4 This patented, submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe, too, because it needs no electrical cord - runs up to 5 hours on three alkaline D batteries. Excellent for use as a portable pump-out device for paddle boats, inflatables, duck boats, dingies and kayaks. Any craft that lacks a hard-wire, permenent electrical system. Features: 6-3/8" high x 5-1/4" Pumps up to 200 gallons per hour Includes 42" hose with garden-hose adapter for adding longer hose Lifts water to height of 40 Note: Not to be used as a permanent bilge pump.

Sierra plugs, taps and elbows Mercruiser exhaust manifolds.

BURKS A3CR6M, Turbine Pump 4 gpm 230v Application: Carpet Cleaning Machines, Small Steam Generators, Solar Heating Systems, Booster Pump, Injector Venturi Operation, Cleaning and Flushing   Frame/Raceway : Bronze Impeller : Bronze (Monel Blades) Shaft : #316 Stainless Steel Front Cover : Bronze Shaft Seal : Carbon-Ceramic / S. Steel / Buna-N   MAXIMUM OPERATING CONDITIONS TEMPERATURE (For Standard Buna-N Seal) : 225°F (107°C) INLET PRESSURE : 50 PSI (344kpa) CASING WORKING PRESSURE : 150 PSI (1034kpa) VISCOSITY : 200 SSU   FEATURES • Compact Size-Ideal for OEM Applications • All Bronze Construction with Monel Impeller Blades • Carbon/Ceramic Shaft Seal for Temperatures to 225°F (107°C) • #316 Stainless Steel Shaft • Close Coupled Design - No Couplings or Alignment Problems • Motors have ball/ball bearing construction and open ventilated enclosure. Motors are NOT drip-proof. Rated for continuous duty operation at all ratings shown. • Capacitor Start Motors Have Built-In Automatic Overload Protection • Furnished with UL Recongnized Motor Lead • Field Adjustable Impeller for Extented Service Life   Motors have ball bearing construction and open ventilated enclosure. Motors are NOT drip-proof. Compact size: only 10 1/2" long x 4" wide x 6 1/4" high.)   UNSPSC Code: 40150000

Cal Pump MS-580-20 Pump 580Gph 115/120V 20'Cord Cal Marine Pumps are certified to the following standards: UL, CE, ABYC and U.S. Coast Guard Premium stainless steel and bronze construction for longevity 115 Volts - 20ft power cord - 3 wire; black, white, green ( NO PLUG ON END ) Suitable for fresh, salt or chlorinated water applications (max of 3-5 ppm) Can be used in hot water applications up to 110°F Extremely quiet operation Use submerged or in open air (below water level) Viton seals suitable for harsh marine applications 3/4" MPT Intake and 1/2" MPT Discharge Approximate dimensions: 4-1/2" x 6-1/4"  

304 Stainless Steel Basket Strainer Only Size 5 for 3/4" Strainer Features: Perko 049300599D 304 Stainless Steel Strainer Basket For #5 (3/4"-npt) Basket Measures 1-13/16"-dia. X 6-1/4"-high

Swivel Safety Hasp Dimensions: 3" x 1-1/4" Staple Hole: 5/16" Diameter Fastener: #8(4) Material: 304 Stainless Steel

Package Roller Shaft 1/2" x 6-1/4" with Cap Nuts - Zinc Roller shafts blister packed each with two cap nuts. Features: Length: 6-1/4" Max Grip: 5.690"

Sierra Marine Engine Parts & Drive Parts   Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.   If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.   Warning: We can no longer ship engine parts International or to California Due to Prop 65.

For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.

For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.

Jabsco 1673-1003 Pump 1/2" Ped Mt FEATURES Pump Body: Bronze Port Size: 1/2" NPT Impeller: Nitrile Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.) Impeller: Neoprene or Nitrile (Oil Resistant) Shaft Seal: Lip Seal or Mechanical seal, Buna N Shaft: Stainless Steel Bearings: Sealed Ball Bearings    APPLICATIONS  This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.   MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.   INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,   Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.   FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.   PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools   Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Nitrile Impeller