|
Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.
|
63.99 |
|
|
Shields Multflex Hose has a clear FDA formula PVC with black vinyl helix. It is abrasion resistant, flexible and resistant to mild chemicals and salt water. Primarily used for bilge pump discharge, potable water tank fill and drains. Uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Do not use ethylene glycol based antifreeze in hose.
|
125.00 |
|
|
For below waterline connections such as livewell intake and drain, bilge pump intake and discharge, drains in sink, shower or scupper, and for sanitation intake and vent. Black smooth cover with vinyl helix. Rated for full vacuum. Resistant to mild chemicals and salt water. Not for use with ethylene glycol based antifreeze.
|
129.00 |
|
|
3/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - Black
Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.
Features:
Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius
Resists heat, ozone, exhaust, sani chemicals, panting and collapse
Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved
Application:
Trident Flex wet exhaust hose for longer bent connections
In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses
Construction:
Tube & Cover: High temp EDPM rubber
Color: Black with blue stripe
Reinforcement: Multi-ply, high-tenacity polyester, steel helix
Temperature Range: 250°F (121°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 3/4" / (mm) 20
Outer Diameter: (inch) 1.15" / (mm) 29
Working Pressure: (Psi) 100 / (bar) 6.9
Bend Radius: (inch) 1" / (mm) 25
Weight: (Lb./50ft.) 23 / (Kg/m) 10.3
*Burst Pressure is 4 x Working Pressure
|
365.15 |
|
|
Flame retardant polypropylene wiring conduit, black with blue stripe. Split for easy access to harness. Meets ABYC and UL 94V2 standards. 50' length.
|
54.99 |
|
|
3/4" x 50' Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix
Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.
Features:
Flexible, but the 147 series is less flexible than the 149 series of hoses
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Clear vinyl reinforced with black helix
Color: Clear with black helix
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-49°C)
Boxed: 50ft. / (15.24m)
Inner Diameter: (inch) 3/4" / (mm) 19
Outer Diameter: (inch) 0.968" / (mm) 24.6
Working Pressure: (Psi Vac In./Hg) 28
Weight: (Lb./ 50 ft.) 11 / (Kg/m) 0.33
Bend Radius: (inch) 2.25" / (mm) 57.2
*Burst Pressure is 4 x Working Pressure
|
88.32 |
|
|
Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.
|
109.00 |
|
|
Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.
|
71.99 |
|
|
3/4" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black
Trident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.
Features:
149 series of hoses is extra flexible
Application:
Bilge and live well hose
Specifications:
Tube & Cover: Hard PVC helix
Color: Black
Reinforcement: PVC Helix
Temperature Range: 10°F-120°F (-12°C-48°C)
Boxed: 50ft. / (15.2m)
Inner Diameter: (inch) 3/4" / (mm) 19.1
Outer Diameter: (inch) .986" / (mm) 25
Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93
Weight: (Lb./ 50 ft.) 11 / (Kg/m) 4.99
Bend Radius: (inch) 3" / (mm) 76.2
*Burst Pressure is 4 x Working Pressure
|
89.75 |
|
|
3/4" x 50' Boxed Reinforced PVC (FDA) Cold Water Feed Line Hose - Drinking Water Safe - Translucent Blue
Trident 165 Series Blue - polyester reinforced PVC hose for "Cold Water" feed lines. The FDA-grade tube is non-toxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures as low as -18.4ºF (- 28ºC) and can handle pressures up to 250 psi (varies based on i.d size).
Features:
The Blue cover allows for easy identification of "Cold Water" lines on your boat
Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility
This hose is safe for use with drinking water
Application:
Perfect for cold pressurized applications, water feed, drains, and vent lines
Construction:
Tube & Cover: Clear FDA tube
Color: Blue Transparent
Reinforcement: Polyester
Temperature Range: -18°F to 149°F (-28°C to 65°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 3/4" / (mm) 19
Outer Diameter: (inch) 1 / (mm) 25.4
Working Pressure: (PSI Vac In./Hg) 220 / (bar) 15
Bend Radius: (inch) 1.5" / (mm) 38
*Burst Pressure is 4 x Working Pressure
|
71.83 |
|
|
3/4" x 50' Boxed Reinforced PVC (FDA) Hot Water Feed Line Hose - Drinking Water Safe - Translucent Red
Trident 166 Series Red - polyester reinforced PVC hose for "Hot Water" feed lines. The FDA-grade tube is nontoxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures of up to 149ºF (65ºC) and can handle pressures to a maximum of 250 psi (varies based on i.d size).
Features:
The Red cover allows for easy identification of "Hot Water" lines on your boat
Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility
This hose is safe for use with drinking water
Application:
Perfect for hot, pressurized applications, hot water feed, drains, and vent lines
Construction:
Tube & Cover: Clear FDA tube
Color: Red Transparent
Reinforcement: Polyester
Temperature Range: -18°F to 149°F (-28°C to 65°C)
Length: 50’ (15.24m)
Specifications:
Inner Diameter: (inch) 3/4" / (mm) 19
Outer Diameter: (inch) 1 / (mm) 25.4
Working Pressure: (PSI Vac In./Hg) 220 / (bar) 15
Bend Radius: (inch) 1.5" / (mm) 38
*Burst Pressure is 4 x Working Pressure
|
71.83 |
|
|
2" Bronze Pedestal Pump
Flow rate: Nominal 60 gallons/min at 1500 rpm
Self-priming from dry up to 7.8ft
Features:
Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
Easy to service and maintain.
Inexpensive to buy and operate.
Will tolerate abrasive wear (this may affect performance - seek advice from your distributor).
Handles hard and soft solids without clogging.
Can pump in either direction.
Will not airlock.
APPLICATIONS
MARINE:
Engine cooling, pumping bilges, wash downs, circulating water in bait tanks, utility dock side pump.
INDUSTRIAL:
Circulating and transferring, Velocity-mixing, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Inks, Dyes, Alcohol, Tanning Liquors, Glycerin, Brine, etc.
FARMING:
Pumping water for stock, Pumping water from shallow wells and cisterns.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1284.94 |
|
|
Globe Impeller Model 125 RED
Globe Impeller Model 125 RED Replaces the following impellers
Ancor J050405
CEF 500205
Jabsco 18021-0003, 836-0003, 836-0008
Johnson Pump 09-1029B-9
Sierra Marine 18-3037
Weight: 0.6 lbs.
Od (in/mm): 3 3/4" / 95
Width (in/mm): 2 1/2" / 63
Shaft Size (in/mm): 1" / 25
Drive Type: 12 pt Spline
Core Type: Composite
Number of Blades: 9
Silhouette Letter: O
Fuel Type: Diesel
Includes matching Gaskets or O-rings
For Diesel and Oil Applications Only
|
141.49 |
|
|
Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.
|
17.99 |
|
|
Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.
|
19.99 |
|