|
For 2 or 3-wire configurations of: 12V, 24V, 12/24V, 24/36V, or 36V Systems. Water-tight sealing cap and O-ring seal. Corrosion resistant, plated-brass electrical components. Standard 1 1/8" diameter mounting hole for easy installation. Mounting plate and locking ring for front and rear access installation. Easily replaces other trolling motor receptacles. Can be used for many other DC applications. Max amp rating of 62A @ 36VDC when used with Sierra WH10620P Plug. Accepts 16 to 6 AWG wire without the need of an expensive adapter.
|
32.99 |
|
|
For 2 or 3-wire configurations of: 12V, 24V, 12/24V, 24/36V, or 36V Systems. Water-tight sealing cap and O-ring seal. Corrosion resistant, plated-brass electrical components. Standard 1 1/8" diameter mounting hole for easy installation. Mounting plate and locking ring for front and rear access installation. Easily replaces other trolling motor receptacles. Can be used for many other DC applications. Max amp rating of 62A @ 36VDC when used with Sierra WH10620P Plug. Accepts 16 to 6 AWG wire without the need of an expensive adapter.
|
38.49 |
|
|
For 2 or 3-wire configurations of: 12V, 24V, 12/24V, 24/36V, or 36V Systems. Water-tight sealing cap and O-ring seal. Corrosion resistant, plated-brass electrical components. Standard 1 1/8" diameter mounting hole for easy installation. Mounting plate and locking ring for front and rear access installation. Easily replaces other trolling motor receptacles. Can be used for many other DC applications. Max amp rating of 62A @ 36VDC when used with Sierra WH10620P Plug. Accepts 16 to 6 AWG wire without the need of an expensive adapter.
|
65.99 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Replacement Garboard Drain Plug Only *2-Pack
Provides bilge drainage when hauling out and the nut removed with a wrench or pliers.
Features:
Machined tapered pipe threads ensure a watertight plug fit
3/8" neck depth
Specifications:
Construction: Brass
*Sold as a package containing two drain plugs
|
11.99 |
|
|
ConnectPro® 3-Wire Receptacle
Features:
Universal design for 2 or 3-wire configuration 12, 24, 12/24, 24/36 or 36 volt systems
Watertight sealing cap
Corrosion resistant, plated brass electrical components
Drain holes in receptacle keep water away from electrical components
Perma-Lock screw terminals will not loosen under extreme hull vibrations
Standard 1-1/8" diameter mounting hole
Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation
Accepts 10 and 8 gauge wire
Easily replaces other trolling motor plugs and receptacles
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.08 |
|
|
RayMic Wireless Handset - Only*
*Wireless hub (A80540) required – sold separately
Optional wireless handset
Add up to 2 or 3 wireless handsets to the VHF system
Wireless hub carries both data and audio to and from your wireless handset stations
Waterproof construction
Oversized LCD and rubberized keypads
Built-in lithium ion rechargeable battery for long life with the latest inductive charging technology – no charging port or cable to plug in!
Wireless base station pairs to active speaker
Handset features smart locator alarm – activate alarm from hub
Please see MFG Part Number T70433 to purchase the mic & hub together
|
396.18 |
|
|
Ampco Pumps AC114MD56C-3.75 Peo 1 1/2 X 1 1/2 Kit 3.75
|
1668.60 |
|
|
ConnectPro® Charging/Trolling System Receptacle & Plug
ConnectPro® Receptacle
Universal design for 2 or 3-wire configuration 12, 24, 12/24, 24/36 or 36 volt systems
Watertight sealing cap
Corrosion resistant, plated brass electrical components
Drain holes in receptacle keep water away from electrical components
Perma-Lock™ screw terminals will not loosen under extreme hull vibration
Standard 1-1/8" diameter mounting hole
Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation
Accepts 10 and 8 gauge wire
Easily replaces other trolling motor plugs and receptacles
ConnectPro® Plug
O-ring seal for waterproof connections
Weather resistant plug cover
Corrosion resistant, plated brass electrical components
Accepts 16 to 8 gauge wire
Ergonomic contoured grip for easy hook-up and ground blade alignment
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.61 |
|
|
ConnectPro® Charging/Trolling Receptable, Plug & 6-Guage Adapter
The ConnectPro® system features locking plug and receptacle and spring clamping connection, which provide a secure electrical contact.
Receptacle is universal design for 2-or-3 wire configuration, 12, 24, 12//24, 24//36 or 36 volt systems.
Features:
Watertight sealing cap
Corrosion resistant, plated brass electrical components with drain holes in receptacle to keep water away from electrical components
Standard 1-1/8 diameter mounting hole and accepts up to 8 gauge wire
Includes mounting plate
Plug has O-ring seal for waterproof connections
Weather resitant plug cover
Accepts 16 to 8 gauge wire
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
54.44 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1 1/2" SHAFT 3" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
137.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1 1/2" SHAFT 3 1/4" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
137.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1 1/2" SHAFT 3 1/2" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
137.26 |
|
|
50A Battery Charger - 12V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 50 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
Features:
Switch mode technology for high efficiency, lightweight and quiet operation
Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
Can charge 2 banks of batteries simultaneously, no isolator necessary
Can be used as a power supply or DC UPS when used in conjunction with a battery
User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries
“Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
Voltmeter and Ammeter for monitoring
Fan cooled based on output current
Protections: Short circuit, overload, reverse battery connection and over temperature
Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
Input: 120 VAC 60 Hz or 230 VAC 50 Hz
Output: 12 VDC
Amps: 50
Remote Control: 900-RC
Weight: 9.0 (lbs)
Weight: 4.1 (kg)
Dimensions: 13.03 x 9.60 x 3.82 (in)
Dimensions: 331 x 244 x 97 (mm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
445.22 |
|
|
80A Battery Charger - 12V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 80 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
Features:
Switch mode technology for high efficiency, lightweight and quiet operation
Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
Can charge 2 banks of batteries simultaneously, no isolator necessary
Can be used as a power supply or DC UPS when used in conjunction with a battery
User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries
“Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
Voltmeter and Ammeter for monitoring
Fan cooled based on output current
Protections: Short circuit, overload, reverse battery connection and over temperature
Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
Input: 120 VAC 60 Hz or 230 VAC 50 Hz
Output: 12 VDC
Amps: 80
Remote Control: 900-RC
Weight: 9 (lbs)
Weight: 4.1 (kg)
Dimensions: 15 x 9.61 x 3.82 (in)
Dimensions: 381 x 244 x 97 (mm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
632.32 |
|