|
Gianneschi EXCELSIOR 2-GB Hand Pump
This pump is suitable for lifting and pushing of clear liquids, and can be used for fresh or sea water. The body of the pump is cast iron, and the internal parts are bronze. The performance of this hand pump is in accordance with EN ISO 9906. The flow rate of 6.3 GPM at 95 feet head (40 PSI) is relative to 60 cycles/minute.
Pump Body: Cast Iron
Impeller: Bronze
Port Size: Inlet Port is 1 Inch
Discharge Port is 1 Inch
|
898.39 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
|
46.89 |
|
|
Engine Cooling Pump for Kohler - 5-7 Diesel kW
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
Kohler 5-7 KW Diesel
Replaces Pump:
Kohler - 28487 359341 GM28487 (Impeller Kohler 359978)
Sherwood - G8001 (Impeller Sherwood 8000K)
|
196.96 |
|
|
Engine Cooling Pump for Kohler - 5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, & 8EFKD
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, and 8EFKD
Replaces Pump:
Kohler - GM63535 (Impeller Kohler 359978)
Sherwood - G8005 (Impeller Sherwood 8000K)
|
209.82 |
|
|
Engine Cooling Pump for Kohler
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
N/A
Replaces Pump:
Kohler - GM46936, GM344371 (Impeller Kohler 229826)
Sherwood - G910P (Impeller Sherwood 9959K)
|
241.37 |
|
|
Sierra water pump kits Mercury and Mariner outboard engines. Kit contents based on application.
|
82.99 |
|
|
Haight Pump 3E-S23 Hot Oil Pump & Motor
Features :
Pump Body: Cast Iron
Shaft Seal: Viton Mechanical Seal
Motor Specs : 1/3 Horsepower, 1800 RPM, 115/230 Volts, Single Phase
Haight 3E-S23A is a Hot Oil Pump and Motor assembly with Cast Iron Construction, Viton Mechanical Seal, close coupled to a 1/3 HP, 1800 RPM, 115/230 Volt Motor. These pumps are particularly well suited for use in direct drive, hub mounted configurations where size, weight, and cost are crucial performance criteria in an application. The rugged simplicity of these pumps has been proven thousands of times every year in high temperature applications through-out the world. Since 1972, Haight Pump has earned a well deserved reputation for their expertise in the hot oil pump market. With over thirty years experience supplying equipment that meets the design and performance criteria for an astounding variety of customers, these pumps can help you meet your performance goals. Haights versatility, durable construction, and competitive price has proven a winning combination in hundreds of thousands of commercial kitchens, stores and factories throughout the world.
|
1039.85 |
|
|
Little Giant Submersible Pump with 6' Cord
Little Giant 3E-12NR Submersible or In-Line Pump
115 Volt 60Hz 1/15 HP Permanently Lubricated Oil Filled Motor,
670 GPH at 1 Foot Head, Shutoff Head 22.6 Feet,
Inlet: 1/2" FNPT or Screened,
Outlet: 1/2" MNPT and 3/4" Tubing,
Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal,
Fluid Temperature Up to 120F (49C), UL Listed, 6 Foot Power Cord
Item #
Model
Volts
Cord
Protection
503203
3E-12NR
115
6 ft.
Thermal overload
503203 Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
It is not recommended to use the 3E series in aquariums, swimming pools and fuel oil transfer applications.
|
372.06 |
|
|
Sierra replacement shift parts for Mercury and Mariner engines.
|
23.99 |
|
|
Walbro FRB-23-2 24V Fuel Pump 8-11 Psi
Pressure: 8.0 - 11.0 psi
Outlet Check Valve: None
Magnetic Trap: Yes
Minimum Flow Rate: 43 gph
Dry Lift: 48"
Current Draw: 1.7 Amp
Inlet/Outlet: 1/4-18 NPSF
Fuse: 5A
Inlet Filter Screen: 70 Micron
Service Life: 18,000+ hr
Voltage: 24V DC
Weight: 1.83 lb
The FRB is an advanced electric fuel pump with internal circuitry allowing it to operate at a variable frequency.
When turned on, it will cycle as long as there is a demand for fuel, but when fuel demand decreases, the pump slows down as it builds pressure in the fuel delivery line - until the pump's rated maximum pressure is reached, and the pump stops.
These FRB pumps are especially suitable for applications where battery life, low noise, and best durability are important.
Not recommended for applications such as heater or stove systems as output pressures are too high.
For heater and stove fuel pumps, use the lower pressure Walbro FRD Series. See Related Products, below.
The FRB is designed to serve as a primary pump (replacing a mechanical fuel pump) or as an auxilliary fuel pump (assisting the existing pump) for internal combustion engines.
A common application is supplying fuel to the those diesel refrigeration units mounted high on tractor-trailer trucks.
These pumps incorporate a new piston mechanism which, unlike rubber diaphragms, is not affected by modern, high-tech fuel blends.
• Pump cycles only when fuel is demanded - so the pump cycles on and off
• The non-adjustable maximum output pressure is factory pre-set in the ranges specified in the table, below
• Continuous duty life (diesel fuel): >18,000 hours
• Can run dry for up to 4 hours
• Flow rates as high as 60 gph, but 30 gph is a more typical maximum
• Compatible with all commercially available pump grade gasoline, gasoline-alcohol blends, diesel, and bio-diesel fuels
• Self-priming to 4 feet
• Current draw averages less than 2 amps
• USCG 16623-1 and 16623-2 approved; ignition protected
• Anodized, corrosion protection coating passes 1,000 hr salt spray test - suitable for marine applications
• Replaceable internal 70 micron mesh filter
• Magnetic trap for ferrous contaminants
• Inlet (lower, side)/Outlet (top): 1/4-18 NPSF (Dryseal American National Standard Straight Pipe Thread) — will accept NPT tapered fittings without leaking, thread sealant recommended
• Dimensions: 5.83"H x 2.76"Dia.
• Note - a suffix number (typically -1 or -2) in part number refers to type of packaging
• Made in USA
|
271.04 |
|
|
Little Giant Submersible Pump 503375
Little Giant 3E-12N-WG Submersible or In-Line Pump
Motor 115 Volt 60Hz 1/15 HP Permanently Lubricated Oil Filled Motor, 500 GPH at 1 Foot Head, Shutoff Head 17.3 Feet, Inlet: 1/2" FNPT or Screened, Outlet: 1/2" MNPT and 3/4" Tubing, Epoxy Coated Aluminum Housing, Nylon Body, Fluid Temperature Up to 120F (49C), UL Listed, 15 Foot Power Cord, Pump Color is Black for Lower Visibility in Ponds or Fountains
503375, Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
It is not recommended to use the 3E series in aquariums, swimming pools and fuel oil transfer applications
|
325.26 |
|
|
Concord Power Torque Series impellers feature large blade area with a geometric blade design that delivers thrust and efficiency. Concord enhances 4-Stroke engine characteristics delivering acceleration and top end performance. Fits Honda 1235cc engine models R-12X (2004-2007), F-12X/F-12X GPScape (2002-2004), R-12 (2002-2004) and F-12 (2002-2004) all with 155mm pump diameter.
|
428.99 |
|
|
Concord Power Torque Series impellers feature large blade area with a geometric blade design that delivers thrust and efficiency. Concord enhances 4-Stroke engine characteristics delivering acceleration and top end performance. Fits Honda 1235cc engine models R-12X (2004-2007), F-12X/F-12X GPScape (2002-2004), R-12 (2002-2004) and F-12 (2002-2004) all with 155mm pump diameter.
|
428.99 |
|
|
High performance lubricant designed to meet and exceed all Domestic and Import engine manufacturers' warranties. Exceeds JASO, ISO, API and NMMA for advanced generation 2 cycle lubricants. Protects engine against heat, friction and rust. Formulated specifically for BRP E-Tec and most other high performance 2-stroke marine engines. Priced each, sold in case quantities only.
|
69.29 |
|