|
For straight connections in wet exhaust systems or engine water circulation. Black heavy walled synthetic rubber with 2 plies of synthetic cord, no imbedded wire. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and salt water. Meets SAE J2006 Type R1 requirements including double ozone resistance required by SAEJ2006. Temperature ranges from -20°F - +200°F continuous, +250°F intermittent.
|
219.99 |
|
|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
Package Roller Shaft 1/2" x 6-1/4" with Cap Nuts - Zinc
Roller shafts blister packed each with two cap nuts.
Features:
Length: 6-1/4"
Max Grip: 5.690"
|
4.91 |
|
|
4° Rectangular Base
Tube Outer Diameter:1"
Base: 3-1/2" x 3"
Fastener: 1/4"(4)
Material: 304 Stainless Steel
* With 1/4-28 set screws, Part 6249
|
44.35 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 6" - 5-Pack - Black
Package of 5 Black 6"(15.2cm) long sections with a 1/2"(12.7mm) diameter that shrinks to 5/32"(4mm)
Wire Range: 8-4 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.58 |
|
|
Heat Shrink Tubing 1/2" x 6" - Red - 5 Pieces
Package of 5 Red 6 in (15.2 cm) long sections with a 1/2 in (12.7 mm) diameter that shrinks to 5/32 in (4 mm).
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257 deg F / 125 deg C
Operating temperature range of -40 deg C to 110 deg C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.34 |
|
|
Perko 3-1/2" X 2-1/2" Scoop Strainer Bronze
Cast bronze
Machine slots
Technical Information:
For Thru-Hull Size Inches: 3/8 & 1/2
Dimensions Strainer Inches: 3-1/2 x 2-1/2
Model Number: 0066DP1PLB
Ship Weight: 2.0/1.8 lbs.
Screw Size: #8
|
17.17 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
For straight connections in wet exhaust systems or engine water circulation. Black heavy walled synthetic rubber with 2 plies of synthetic cord, no imbedded wire. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and salt water. Meets SAE J2006 Type R1 requirements including double ozone resistance required by SAEJ2006. Temperature ranges from -20°F - +200°F continuous, +250°F intermittent.
|
249.99 |
|
|
For straight connections in wet exhaust systems or engine water circulation. Black heavy walled synthetic rubber with 2 plies of synthetic cord, no imbedded wire. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and salt water. Meets SAE J2006 Type R1 requirements including double ozone resistance required by SAEJ2006. Temperature ranges from -20°F - +200°F continuous, +250°F intermittent.
|
179.99 |
|
|
March MDX-3 1/2" Ports Pump W/115V Mtr
|
281.78 |
|
|
Description: Plate - 3-1/2 x 1-1/2"
Material: 304 Stainless Steel
Stock: 1/2"
Eye Ring Diameter: 1-1/2"
Thread Length: 3-7/16"
|
22.36 |
|
|
Butt Hinge
Length:3-1/2"
Width:2-1/4"
Fastener:#8 FH
Material: 304 Stainless Steel
|
10.86 |
|
|
Ampco Pumps AC114MD14T-S Peo 1 1/2 X 1 1/2 Kit
|
1668.60 |
|
|
Ampco Pumps AC114MD18T-S Peo 1 1/2 X 1 1/2 Kit
|
1668.60 |
|