 |
Marine grade lift support for exact OE replacement. Annealed steel rods, nitride coated for corrosion resistance, polymer rod ends, bronze bushings and multi-lobe internal seal. Display packaged. (Ext = Extended Length, Comp = Compressed Length, Rating = Pressure Rating).
|
31.89 |
|
 |
Marine grade lift support for exact OE replacement. Annealed steel rods, nitride coated for corrosion resistance, polymer rod ends, bronze bushings and multi-lobe internal seal. Display packaged. (Ext = Extended Length, Comp = Compressed Length, Rating = Pressure Rating).
|
31.89 |
|
 |
Marine grade lift support for exact OE replacement. Annealed steel rods, nitride coated for corrosion resistance, polymer rod ends, bronze bushings and multi-lobe internal seal. Display packaged. (Ext = Extended Length, Comp = Compressed Length, Rating = Pressure Rating).
|
31.89 |
|
 |
Marine grade lift support for exact OE replacement. Annealed steel rods, nitride coated for corrosion resistance, polymer rod ends, bronze bushings and multi-lobe internal seal. Display packaged. (Ext = Extended Length, Comp = Compressed Length, Rating = Pressure Rating).
|
31.89 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
 |
Marine grade lift support for exact OE replacement. Annealed steel rods, nitride coated for corrosion resistance, polymer rod ends, bronze bushings and multi-lobe internal seal. Display packaged. (Ext = Extended Length, Comp = Compressed Length, Rating = Pressure Rating).
|
31.89 |
|
 |
Marine grade lift support for exact OE replacement. Annealed steel rods, nitride coated for corrosion resistance, polymer rod ends, bronze bushings and multi-lobe internal seal. Display packaged. (Ext = Extended Length, Comp = Compressed Length, Rating = Pressure Rating).
|
31.89 |
|
 |
GP1080-06 SystemPod Pre-Cut f/Raymarine es95/es97/es98 & 2 Instruments (3.6" Hole) for 9.5" Wide Guard
GP1080 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards .
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
462.53 |
|
 |
GP1170-14 SystemPod Pre-Cut for Raymarine eS95/eS97/eS98 & 4 Instruments (3.6" Hole) for 9.5" Wide Guard
Instrument Cut Out Size: 3.6" Hole
The NavPod GP1170 Series for 9.5" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all Gen3 NavPods.
|
462.53 |
|
 |
GP1503 SystemPod Pre-Cut for Raymarine a75/a77/a78 with Space On The Left for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
331.62 |
|
 |
GP1507 SystemPod Pre-Cut for Raymarine a65/a67/a68 with Space On The Left for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
331.62 |
|
 |
Marine grade lift support for exact OE replacement. Annealed steel rods, nitride coated for corrosion resistance, polymer rod ends, bronze bushings and multi-lobe internal seal. Display packaged. (Ext = Extended Length, Comp = Compressed Length, Rating = Pressure Rating).
|
31.89 |
|
 |
Marine grade lift support for exact OE replacement. Annealed steel rods, nitride coated for corrosion resistance, polymer rod ends, bronze bushings and multi-lobe internal seal. Display packaged. (Ext = Extended Length, Comp = Compressed Length, Rating = Pressure Rating).
|
31.89 |
|
 |
Marine grade lift support for exact OE replacement. Annealed steel rods, nitride coated for corrosion resistance, polymer rod ends, bronze bushings and multi-lobe internal seal. Display packaged. (Ext = Extended Length, Comp = Compressed Length, Rating = Pressure Rating).
|
31.89 |
|
 |
Marine grade lift support for exact OE replacement. Annealed steel rods, nitride coated for corrosion resistance, polymer rod ends, bronze bushings and multi-lobe internal seal. Display packaged. (Ext = Extended Length, Comp = Compressed Length, Rating = Pressure Rating).
|
31.89 |
|
