Sierra Marine Engine Parts & Drive Parts   Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.   If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.   Warning: We can no longer ship engine parts International or to California Due to Prop 65.

HOT FOOT™ Universal Original Foot Throttle for All Marine Engines Now compatible with all Mercury 175-300 Pro XS outboard motors The Original and ONLY real HOT FOOT™ Throttle Drive your boat safer by driving it like your car. This is the one and only HOT FOOT™ throttle - the original boat foot throttle that has been on the market for 30+ years. This throttle allows you to drive your boat like you do your car. You keep both hands on the wheel and control the throttle with your foot. The throttle returns to idle if you remove your foot. This throttle is a must-have for safe operation of high performance boats. Features: Drive your boat like you drive your car -- features make driving your boat fun and safe Number one throttle on the market for over 20 years Provides added safety and performance Improves throttle control for all outboard and inboards All cast aluminum and stainless steel hardware Lightweight and resistant to corrosion Stainless steel hardware and non-sticking teflon and nylon bearing surfaces for trouble free operation Nylon and teflon bushings on all critical pivot points Stainless steel spring returns engine to idle position when released Equipped with toe clip for additional safety in extreme operating conditions Uses standard control cables for easy hook-up (longer throttle cable not included) Mounts directly to floor of boat with four screws (not included) Patented Idle Stop for FICHT and Optimax Engines Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Original Equipment Quality Replacement Suzuki Outboard Starter - 2017-Up Replacement outboard starter that will fit Suzuki 70HP-100HP, 150-350HP 2017-2023. ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit. Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: SUZUKI Outboard Starter 31100-98L10 SUZUKI Outboard Starter 31100-98L00 SIERRA Outboard Starter 18-6962 MITSUBISHI Outboard Starter M000TD5872 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Original Equipment Quality Replacement Yamaha Outboard Starter - 2008-Up Replacement outboard starter that will fit 25HP-40HP 2009-2022. ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit. Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: YAMAHA Outboard Starter 6BG-81800-00-00  MITSUBISHI Outboard Starter M0TA5071 SIERRA Outboard Starter 18-6964 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Original Equipment Quality Replacement Yamaha Outboard Starter - 2007-2022 Replacement outboard starter that will fit 300HP-425HP 2007-2022. ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit. Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: YAMAHA Outboard Starter 6AW-81800-00-00 MITSUBISHI Outboard Starter M008T71771 MITSUBISHI Outboard Starter M008T71772 SIERRA Outboard Starter 18-55507 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Original Equipment Quality Replacement Yamaha Outboard Starter - 2003-2009 Replacement outboard starter that will fit 200-250HP 2003-2009. ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit. Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and/or epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: YAMAHA Outboard Starter 60X-81800-01-00 YAMAHA Outboard Starter 60X-81800-00-00 YAMAHA Outboard Starter 60V-81800-00-00 SIERRA Outboard Starter 18-6832 HITACHI Outboard Starter S114-863 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Zinc Wedge Anode for 35-300 HP Mercury/Mariner Engines Tecnoseal Zinc Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt water. Mercury part number 826134.

Tecnoseal Trim Plate Anode - Zinc Flat Mercury Alpha for Engines Plate for Trim Material: Zinc Pounds: 0.19 lbs Kg: 0,080 kg Height: 0.91"

Trim Tab Anode Skeg For Engines - Yamaha DX Material: Zinc Length: 5.51" Tab Height: 2.83" Outer Diameter: 3.94" Weight: 1.38lbs

Trim Tab Anode Skeg For Engines - Yamaha SX Material: Zinc Length: 5.51" Tab Height: 2.83" Outer Diameter: 3.94" Weight: 1.38lbs

TEC-BNT Bennett Trim Tab Anode - Zinc - Pair Bennett Trim Tab Anode Features & Specifications: Material: Zinc Length: 3.76" Width: 1.12" Height: 0.55" Weight: 0.47lbs

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

MS-BB100 Marine Black Box AM/FM/BT - 2 Zone Introducing the MS-BB100, a compact black box entertainment solution that incorporates the marine industry supported Fusion-Link protocol and Fusion's proven marine engineering skillset to deliver a boat load of tunes.  An industry first, the BB100 includes an easy touch Bluetooth embedded IPx7 water resistant remote for quick audio adjustments.  Supplied with a 2m (6.6ft) connection cable, the wired remote is ideally shaped for hassle free installation onto a dash or boat console.  With the Bluetooth receiver embedded into the remote we can reduce the likelihood of interference occurring between your smartphone and the receiver.  Engineered for either a flush or flat mount installation, you can choose the finish to suit your vessel. NMEA 2000  Ready for connection and control from any supported Multi-Function Display - The MS-BB100 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-BB100 with a supported chartplotter or fish finder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the BB100 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones Fusion-Link™ makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat. Multi-Zone Control With two independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone. Features: Small footprint Black Box design with included Bluetooth embedded wired remote IPx7 water resistant wired remote with quick Bluetooth pairing Flush or flat mounting remote control installation options Fusion-Link NMEA 2000 Ready for connection and control from any supported Multi-Function Display Multi-Zone™ Technology – Two independent audio zones are available, each with advanced localized menu controls, including zone naming True-Marine™ Designed and Engineered – Extensively tested to perform in the harsh marine environment Technical Specifications: 2 Zones 200 Watts peak power NMEA 2000 compatible  Class AB Amplifier Rear USB connection Dimensions (W/H/D) - 6-1/8" x 2-3/8" x 3-11/16"  Remote Dimensions (Diameter/Depth) - 2-9/16 x 3/16"  In the Box: Media Black Box Remote - Wired Remote Mounting Hardware/Gasket Remote Mounting Template 6' NMEA 2000 Drop Cable Power Wiring Harness Aux/Line-out Harness Documentation *SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Wedge Anode for 35-300 HP Mercury/Mariner Engines Tecnoseal Aluminium Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt or brackish water. Mercury part number 826134.

Jabsco 29450-1701 Pump for Perkins Marine Engine Pump Body: Bronze Port Size: 3/4" (20mm) Horizontal Hose Ports Impeller: Neoprene   3/4" (20mm) hose ports, 'hot stamp' body with integral cam, 4 bolt flange mount, 3 screw end cover, shaft drive end has screw thread and taper.   For Perkins Marine and others.