|
Yamaha Fuel Line Kit 6' x 3/8"
Attwood's low-permeation fuel line kits set the standard in performance, safety, and value. Along with featuring Attwood's award-winning Universal Sprayless Connector, these kits meet strict United States EPA regulations. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.
Features:
Includes Attwood's award-winning Universal Sprayless Connector; no more dangerous fuel sprays when connecting and disconnecting pressurized lines
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Includes 3/8-inch low-permeation fuel hose that resists kinking and hardening; rated up to 100 degrees Centigrade
Versatile: compatible with Ethanol blended fuels, Yamaha Brand engines and tanks
Attwood products are both compatible and reliable, engineered and built with a never-fail attitude
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.14 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Universal Brass Fuel Hose Fitting - 1/4" NPT x 3/8" Barb
This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.
Features:
Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
Material Construction: Brass
Male thread, hose barb
(inch) Male 1/4" NPT x 3/8" Barb
*Use thread sealant on all threads
|
6.52 |
|
|
Universal Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" Barb
This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.
Features:
Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
Specifications:
Material Construction: Aluminum
Male thread, hose barb
(inch) Male 3/8" NPT x 3/8" Barb
*Use thread sealant on all threads
|
4.25 |
|
|
Aluminum Fuel Hose Fitting - 1/4" NPT x 3/8" Barb - (Anti-Siphon Valve)
This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line. This is a male thread, anti-siphon valve with ¼-In. NPT x 3/8-In. barb.
Features:
Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
Anti-Siphon Valve
Material Construction: Aluminum
Male thread, hose barb
(inch) Male 1/4" NPT x 3/8" Barb
*Use thread sealant on all threads
|
9.95 |
|
|
Aluminum Fuel Hose Fitting - 3/8" NPT x 3/8" Barb - (Anti-Siphon Valve)
This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line. This is a male thread, anti-siphon valve with 3/8-In. NPT x 3/8-In. barb.
Features:
Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels
Anti-Siphon Valve
Material Construction: Aluminum
Male thread, hose barb
(inch) Male 3/8" NPT x 3/8" Barb
*Use thread sealant on all threads
|
18.46 |
|
|
Premium Impeller Kit 65 x 15.8 x 68mm - 10 Blade - Spline Insert
Replaces JMP 7420-01, Jabsco 31130-0061.
Specifications:
Weight: 0.244 kg
Dimensions: 65 mm x 15.8 mm x 68 mm
Type: Copolymer Neoprene Original MC Blend
Certification: ISO 9001 Quality Guaranteed
|
41.03 |
|
|
Flojet 01740-003S Strainer 3/8" Barb X 3/8" Barb
Flojet Strainer with 3/8” Hose Barb Inlet and 3/8” Hose Barb Outlet, In-Line Design, Fine 40 Mesh Stainless Steel Screen
Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
Maximum Water Temperature: 160F (70C)
Maximum Pressure: 70 PSI (5 bar)
The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.
|
28.55 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0300
|
227.18 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
|
205.73 |
|
|
T-Top Boat Shade Kit - 6' x 5'
An economical and versatile way to add shade to the rear of your center console or walk around boat. Our light weight material, "Resilience" has exceptional elasticity and protects against harmful UV rays while reflecting up to 75% of UV heat. Installs within minutes. Kit includes necessary poles and stores easily in it's own bag. Available in 3 sizes.
Features & Benefits:
RESILIENCE shades are specifically designed for UV-protection and to handle harsh marine environments.
RESILIENCE is bonded with an outer UV reflective coating. At 20% stretch, it offers an effective UV block of 98% and it will reflect up to 75% of UV heat.
RESILIENCE elasticity allows it to fit many size boats, which gives it a custom fit appearance.
RESILIENCE is extremely breathable and whisper quiet while underway and it can handle speeds up to 30 knots. Because of dark pigments, it holds up to UV rays the longest and provides the most UV protection.
RESILIENCE has a one year warranty. Shade color: BLACK
T-Top Boat Cover's RESILIENCE shades' qualities and features make this the best product available for sun protection anywhere!
Size (width x length): 5' x 6'
Stretch (width x length): 7' x 8'
|
868.75 |
|
|
Premium Impeller Kit 65 x 15.8 x 41.5mm - 12 Blade - Key Insert
Replaces JMP 7300-01, Jabsco 18948-0001, Johnson Pump 09-702B-1, Sherwood 10615K.
Specifications:
Weight: 0.178 kg
Dimensions: 65 mm x 15.8 mm x 41.5 mm
Type: Copolymer Neoprene Original MC Blend
Certification: ISO 9001 Quality Guaranteed
|
23.18 |
|
|
Premium Impeller Kit 65 x 15.8 x 51mm - 12 Blade - Key Insert
Replaces JMP 7352-01, Jabsco 18327-0001, Sherwood 15000K.
Specifications:
Weight: 0.185 kg
Dimensions: 65 mm x 15.8 mm x 51 mm
Type: Copolymer Neoprene Original MC Blend
Certification: ISO 9001 Quality Guaranteed
|
35.68 |
|
|
2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud Terminal
Specifications:
Max Voltage: 300 V AC/48 V DC
Number of Terminal Studs: 4
Terminal Type: 3/8" - 16 Stud
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
99.19 |
|
|
2107 PowerBar 600AMP Cable Connector - 8 x 3/8" 16 Stud Terminal
Specifications:
Maximum Voltage: 300 V AC/48V DC
Number of Terminal Studs: 8
Terminal Type: 3/8" - 16 Stud
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
148.81 |
|