|
Mercury Twist-Lock Female Tank Fitting - Zinc
This Attwood Mercury/Mariner Engine Fuel Hose Fitting ensures precise and effective installation of a fuel line to a Mercury/Mariner-brand engine. This Fuel Hose Fitting is a female twist-lock fitting that connects to the tank end of the fuel line. It is a 2-piece fitting with a 90-degree elbow. It is made of acetal, it has a 1/4-inch NPT thread, and it mates to fitting 8892-6 and 14532-6.
Features:
Provides precise installation of a fuel line to a Mercury/Mariner-brand engine
1/4" NPT (National Pipe Thread)
2-piece fitting with a 90-degree elbow
Material Construction: Zinc
*Specifically mates to Attwood part numbers: 8892-6 & 14532-6
|
13.74 |
|
|
Mercury Twist-Lock Female Tank Fitting - Nylon
This Attwood Mercury/Mariner Engine Fuel Hose Fitting ensures precise and effective installation of a fuel line to a Mercury/Mariner-brand engine. This Fuel Hose Fitting is a female twist-lock fitting that connects on the tank end of the fuel line. It is a 2-piece fitting with a 90-degree elbow. It is made of acetal, it has a 1/4-inch NPT thread, and it mates to fitting 8892-6 and 14532-6.
Features:
Provides precise installation of a fuel line to a Mercury/Mariner-brand engine
1/4" NPT (National Pipe Thread)
2-piece fitting with a 90-degree elbow
Material Construction: Nylon
*Specifically mates to Attwood part numbers: 8892-6 & 14532-6
|
11.60 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Mercury Twist-Lock Male Hose Fitting - Zinc
This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Barbed fitting fits 3/8" I.D. hose. Clamps are not included. Use thread sealant on all threads.
Features:
Mercury/Mariner fuel fitting
(inch) 3/8" Barb
Material Construction: Die-cast zinc
*Specifically mates to Attwood part numbers: 8882-6 & 14530-6
|
8.75 |
|
|
Mercury Fuel Line Kit - 3/8" Dia. x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6
It also includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Hose and tank fittings come with pre-applied thread sealant
For Mercury engines and tanks
Tank Side: Universal Sprayless Quick-Connect
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
69.84 |
|
|
Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (Pre-1998)
This EPA-certified Attwood Mercury (Pre-1998) Fuel Line Kit reliably delivers fuel to your Pre-1998 Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8893-6
For Mercury Pre-1998 engines and tanks
It also includes an award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant)
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.
|
46.14 |
|
|
Mercury Tank Fitting - 1/4" NPT Thread
Connect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.
Features:
Solid machined brass for dependable performance, peace of mind
Quick-connect ¼-inch male thread makes installation easy
Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel
1/4" NPT (National Pipe Thread)
Specifically designed for Mercury/Mariner Brand engines and tanks
*Specifically mates to Attwood part number: 8890LP6
|
7.96 |
|
|
Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" Barb
For use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.
Features:
Johnson, Evinrude, and OMC fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8883-6
|
5.69 |
|
|
Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" Barb
For use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.
Features:
Johnson, Evinrude, and OMC fitting
Tank or Engine End
Material Construction: Acetal
*Specifically mates to Attwood part number: 8883-6
|
4.64 |
|
|
Twist-Lock Triple Suction Mount with 1/4"-20 Stud
The RAP-B-365-224-202AU consists of a triple 3.3" diameter suction cup twist lock base, double socket arm and round base adapter that contains a 1/4"-20 male camera thread. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The camera base contains a 1" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Features:
Material: High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag
|
66.49 |
|
|
Zinc Wedge Anode for 35-300 HP Mercury/Mariner Engines
Tecnoseal Zinc Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt water. Mercury part number 826134.
|
7.02 |
|
|
20' Carbon Fiber Twist & Lock Outrigger Poles for GS-450, GS-500 & GS-1000 Bases - Black
Carbon Fiber Twist & Lock Outrigger Poles for the ultimate offshore fishing experience. Our patent-pending innovative Twist & Lock design eliminates the frustrating task of locating the pin hole, which means that no bolts or pins are required when attaching to the base. The cylindrical design has the strength to allow for pulling full, triple-tier dredges of ballyhoo, mullet or squids at higher speeds. By far stronger and lighter than any other aluminum pole on the market today, the Carbon Fiber Twist & Lock Outrigger Poles pair with our Pro Series GS-500 Outrigger Mount.
Features and Benefits:
UV-resistant, clear coated black carbon fiber pole construction
Stainless-steel Type-316L swivel rings and anodized aluminum collars
Double outrigger line design on the 16-foot poles and triple outrigger line design on the 20-foot poles for either mono or Dacron
Swivel roller design allows for movement of the rollers to swivel in the direction of lures or bait
Twist & Lock design eliminates the need for pins or bolts
Telescopes to less than 8' for bridge clearance and trailering
Designed for use with our Pro Series GS-500 Outrigger Mount
The 16-foot pole is ideal for boats under 35' long
The 20-foot pole is ideal for boats up to 50' long
Includes adjustable roller line caddy with brass rollers - allowing for easy rigging to the T-Top or gunnel and better line management
Locking pin design keeps poles from collapsing when fully extended and allows for easy collapsing
Sold in Pairs
1-year limited warranty
Specifications:
Length: 20'
Diameter: 1-1/2"
Boat Size: Up to 50'
Color: Black with Silver Rings and Tips
|
3093.06 |
|
|
Locking Fuel Fill Insert
(0525)
Black Plastic with Zinc Alloy Lock Cylinder
Dual purpose key opens fill cap & locking insert
Fits most PERKO vented fills
|
36.00 |
|
|
24' Carbon Fiber Twist & Lock Outrigger Poles for GS-450, GS-500 & GS-1000 Bases - Black
These long outrigger poles pair exclusively with the TACO Pro Series GS-450 and GS-500 Outrigger Mounts. The 24' poles feature our innovative Twist & Lock butt design, which eliminates the frustrating task of locating a locking pin or bolt hole. Additionally, the 24' poles have four of our patented 360º swivel collars, which allow for a more natural bait presentation and less friction on halyard lines. These poles are available to boat builders and fabricators right now!
Features:
UV-resistant, clear-coated black carbon fiber pole construction
Stainless-steel Type-316L swivel rings and anodized aluminum collars
Triple outrigger line design for either mono or Dacron
Telescopes to less than 9' for bridge clearance and trailering
Patented swivel collar design allows for movement of the rollers to swivel in the direction of lures or bait
Twist & Lock design eliminates the need for pins or bolts
Designed for use with the TACO GS-450, GS-500 Outrigger Mounts
Includes adjustable roller line caddy with brass rollers - allowing for easy rigging to the T-Top or gunnel and better line management
Locking pin design keeps poles from collapsing when fully extended and allows for easy collapsing
Sold in Pairs
Length: 24'
Diameter: 1-1/2"
1-year limited warranty
|
2783.75 |
|
|
Twist-Lock™ Suction Cup Mount with EZY-Mount™ Quick Release Adapter
This single suction cup mount (RAM-B-166-326U) was designed in collaboration with OtterBox Hardline Series for industrial applications. This kit includes a B-size RAM® Twist-Lock™ suction cup base, a medium-length socket arm, and a RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series.
With the quick-release tab, simply push the tab to dismount the tablet without having to adjust the mount itself. The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM® Twist-Lock™ suction cup connected to a RAM-B-238U diamond base with a 1" B-size rubber ball. The RAM® Twist-Lock™ suction cup base is a fan favorite for use on vehicle windshields and provides an extra-strong hold on any smooth, non-porous surface.
Features:
RAM® Twist-Lock™ suction cup base is ideal for vehicle windshields and other nonporous surfaces
includes a B-size medium-length socket arm and RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series
Quick-release adapter with release tab for easy docking and removal of devices wrapped in an OtterBox Hardline Series case
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly hardware
Suction Size (inch) 3.3” diameter
Socket to Socket Length (inch): 3”
Hole Pattern (inch): 2-Hole AMPS: 1.912”
Ball Size (inch): B size (1”)
Weight Capacity: The standard use is 2.0 lb. and the heavy-duty use is 1 lb.
Materials: Marine-grade aluminum, high-strength composite, and cast acrylic
Weight: 0.75 lb.
|
41.06 |
|