|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
5/8" Type A2 Fuel & Vent Line Hose - Black - Sold by the Foot
Trident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.
Features:
Sold by the foot
Provides extraordinary resistance to aging, fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Applications:
Fuel Hose for vent and diesel distribution
For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Specifications:
Inner Diameter: (inch) 5/8" / (mm) 15.9
Outer Diameter: (inch) 0.960 / (mm) 24.4
Burst Pressure: (psi) 200 / (mpa) 1.38
Working Pressure: (psi) 50 / (mpa) 0.34
Bend Radius: (inch) 3" / (mm) 76.2
Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72
*The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2
|
5.62 |
|
|
5/8" x 50' Boxed Type A2 Fuel & Vent Line Hose - Black
Trident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.
Features:
Provides extraordinary resistance to aging, fire, heat, cold, and the ozone
Also provides excellent bend-ability
NMMA Type Accepted & CE certified
Application:
Fuel Hose for vent and diesel distribution
For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
Construction:
Tube: Nylon Internal Barrier, NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50 ft. (15 m) Boxed
Specifications:
Inner Diameter: (inch) 5/8" / (mm) 15.9
Outer Diameter: (inch) 0.960 / (mm) 24.4
Burst Pressure: (psi) 200 / (mpa) 1.38
Working Pressure: (psi) 50 / (mpa) 0.34
Bend Radius: (inch) 3" / (mm) 76.2
Weight: (lb/100 ft.) 25.84 / (kg/m) 11.72
*The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2
|
160.07 |
|
|
5/8” A2 Fuel & Vent Line Hose - Black - Sold by the Foot
Trident 5/8” ID A2 Fuel Hose is a gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends).
Features:
Sold by the foot
This hose is built with the best fuel, fire, and age-resistant formulation
Provides extraordinary resistance to aging, fire, heat, cold, and the ozone
Also, provides excellent bend-ability
Application:
Marine Fuel Hose for vent and diesel distribution
For all marine fuels including gasoline, alcohol blends, diesel and bio-diesel
Construction:
Tube: NBR
Cover: NBR/PVC Blend
Reinforcement: Polyester 2 spiral
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: Sold by the Foot
Specifications:
Inner Diameter: (inch) 0.625" / (mm) 15.9
Outer Diameter: (inch) 0.960" / (mm) 24.4
Burst Pressure: (psi) 200 / (mpa) 1.38
Working Pressure: (psi) 50 / (mpa) 0.34
Bend Radius: (inch) 3" / (mm) 76.2
Weight: (Lb./100ft.) 25.84 / (Kg/m) 11.72
*The #317 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted & CE certified.
|
5.22 |
|
|
Universal Fuel Line Kit - 5/16" Diameter x 6' Length
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 5/16-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.
Features:
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.
Universal for any engines and tanks
Multi-Layer, Low-Permeation Primer Bulb
6 ft. x 5/16 in. Low Permeation Hose
Reliably delivers fuel to your engine
*No end fittings included
|
41.39 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 6' Length
This Attwood Fuel Line Kit is a reliable universal replacement for the original equipment on any brand of engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
3/8" x 6' Low Permeation Hose
Universal for any engines and tanks
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Reliably delivers fuel to your engine
*Does not include fittings for the tank end and for the engine end
|
39.74 |
|
|
Primer Bulb - 3/8" Inner Diameter Hose
This Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.
Features:
It is intended for use with a 3/8-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
|
18.89 |
|
|
Primer Bulb - 5/16" Inner Diameter Hose
This Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.
Features:
It is intended for use with a 5/16-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
|
18.89 |
|
|
Primer Bulb - 1/4" Inner Diameter Hose
This Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.
Features:
It is intended for use with a 1/4-inch interior diameter hose
Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour)
Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance
This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified
|
19.30 |
|
|
Gasoline and solvent-resistant primer bulbs meet or exceed EPA/CARB Fuel Permeation Regulations. Stainless steel clamps and dual internal check valves to ensure rapid prime while preventing fuel flow back. WHILE QUANTITIES LAST.
|
29.79 |
|
|
Gasoline and solvent-resistant primer bulbs meet or exceed EPA/CARB Fuel Permeation Regulations. Stainless steel clamps and dual internal check valves to ensure rapid prime while preventing fuel flow back.
|
29.79 |
|
|
Gasoline and solvent-resistant primer bulbs meet or exceed EPA/CARB Fuel Permeation Regulations. Stainless steel clamps and dual internal check valves to ensure rapid prime while preventing fuel flow back. WHILE QUANTITIES LAST.
|
26.99 |
|
|
3/8" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the Foot
This hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year.
Features:
Sold by the Foot
Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone
Also, provides excellent rope-like bend-ability and fitting retention
For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)
EPA Certified and CARB Executive Order for low permeation Type B1-15
NMMA Type Accepted & CE certified
Applications:
Marine Fuel Hose for distribution, return, vent and transfer
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Fluoroplastic Internal Barrier
Cover: Gray CPE Rubber
Reinforcement: 2-Spiral Polyester Plies
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Specifications:
Inner Diameter: (inch) 3/8" / (mm) 9.50
Outer Diameter: (inch) 0.588 / (mm) 14.9
Burst Pressure: (psi) 175 / (mpa) 1.21
Working Pressure: (psi) 35 / (mpa) 0.24
Bend Radius: (inch) 4" / (mm) 101.6
Weight: (lb/100 ft.) 10.5 / (kg/m) 0.156
Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0
*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15
|
4.26 |
|
|
5/16" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the Foot
This hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year.
Features:
Sold by the foot
Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone
Also, provides excellent rope-like bend-ability and fitting retention
For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)
EPA Certified and CARB Executive Order for low permeation Type B1-15
NMMA Type Accepted & CE certified
Applications:
Marine Fuel Hose for distribution, return, vent and transfer
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Fluoroplastic Internal Barrier
Cover: Gray CPE Rubber
Reinforcement: 2-Spiral Polyester Plies
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Specifications:
Inner Diameter: (inch) 5/16" / (mm) 7.92
Outer Diameter: (inch) 0.500 / (mm) 12.7
Burst Pressure: (psi) 175 / (mpa) 1.21
Working Pressure: (psi) 35 / (mpa) 0.24
Bend Radius: (inch) 2.5" / (mm) 63.5
Weight: (lb/100 ft.) 7.8 / (kg/m) 0.116
Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0
*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15
|
3.94 |
|
|
3/8" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray
This hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year.
Features:
Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone
Also, provides excellent rope-like bend-ability and fitting retention
For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)
EPA Certified and CARB Executive Order for low permeation Type B1-15
NMMA Type Accepted & CE certified
Application:
Marine Fuel Hose for distribution, return, vent and transfer
For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel
Construction:
Tube: Fluoroplastic Internal Barrier
Cover: Gray CPE Rubber
Reinforcement: 2-Spiral Polyester Plies
Temperature Range: -20°F to 212°F (-28ºC to 100ºC)
Length: 50’ (15m) Boxed
Specifications:
Inner Diameter: (inch) 3/8" / (mm) 9.50
Outer Diameter: (inch) 0.588 / (mm) 14.9
Burst Pressure: (psi) 175 / (mpa) 1.21
Working Pressure: (psi) 35 / (mpa) 0.24
Bend Radius: (inch) 4" / (mm) 101.6
Weight: (lb/100 ft.) 10.5 / (kg/m) 0.156
Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0
*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15
|
121.68 |
|