Baystar Hydraulic Steering System for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables, and outboard engines with ABYC standard engine tilt tubes. For single station, single engine use only. BayStar is not intended for high speed, high performance type boats, such as bass boats. Low friction hydraulic steering system, 5 turns lock-to-lock. Balanced cylinder with compact design that fits most splashwells and provides full engine movement. Compact helm with small footprint, requires only 3" dash hole (standard or tilt).Packaged complete with helm, cylinder, fittings, tubing, oil, fill kit and detailed instructions. Standard 3/4" tapered steering shaft. Meets ABYC standards and NMMA certification requirements. Baystar Steering System is not for use on pontoon boats.

Sierra Marine Engine Parts & Drive Parts   Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.   If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.   Warning: We can no longer ship engine parts International or to California Due to Prop 65.

Baystar Plus Hydraulic Steering System for single-outboard powered boats including runabouts, inflatables and outboard engines with ABYC standard engine tilt tubes up to 150 HP (total). Single station, single engine use only. BayStar is not intended for high speed, high performance type boats, such as bass boats. Low friction hydraulic steering system, 5 turns lock-to-lock. Balanced cylinder with compact design that fits most splashwells and provides full engine movement. Compact Baystar Plus helm with 5" footprint, requires only 3" dash hole (standard or tilt). Packaged complete with helm (HH4514-3), cylinder, fittings, oil, fill kit and detailed instructions. Meets ABYC standards and NMMA certification requirements. Order HO51XX hoses, sold separately.

Hydraulic steering kit with SeaStar PRO (1500 psi) Kevlar® reinforced, factory swaged hoses. Designed for critical high speed performance applications like bass and flat boats, perfect for high-speed single engine outboards. System includes position able stainless steel O-Ring (ORB) fittings for easy hose routing and improved end gland sealing system for maximum protection from saltwater and compression set. Includes helm, cylinder, hoses, fittings, oil, bleeder kit and instructions.

Hydraulic steering kit with SeaStar PRO (1500 psi) Kevlar® reinforced, factory swaged hoses. Designed for critical high speed performance applications like bass and flat boats, perfect for high-speed single engine outboards. System includes position able stainless steel O-Ring (ORB) fittings for easy hose routing and improved end gland sealing system for maximum protection from saltwater and compression set. Includes helm, cylinder, hoses, fittings, oil, bleeder kit and instructions.

Hydraulic steering kit with SeaStar PRO (1500 psi) Kevlar® reinforced, factory swaged hoses. Designed for critical high speed performance applications like bass and flat boats, perfect for high-speed single engine outboards. System includes position able stainless steel O-Ring (ORB) fittings for easy hose routing and improved end gland sealing system for maximum protection from saltwater and compression set. Includes helm, cylinder, hoses, fittings, oil, bleeder kit and instructions.

Formulated for Baystar and SeaStar hydraulic steering systems. Engineered with a special additive package that contains anti-foaming and anti-rust agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and water emulsification additives. Bleed hose is needed to properly bleed steering. Screws onto fluid bottle making for a clean bleed.

Formulated for Baystar and SeaStar hydraulic steering systems. Engineered with a special additive package that contains anti-foaming and anti-rust agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and water emulsification additives. Bleed hose is needed to properly bleed steering. Screws onto fluid bottle making for a clean bleed.

Formulated for Baystar and SeaStar hydraulic steering systems. Engineered with a special additive package that contains anti-foaming and anti-rust agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and water emulsification additives. Bleed hose is needed to properly bleed steering. Screws onto fluid bottle making for a clean bleed.

Designed for single, non-power-assisted outboard configurations up to 350 hp, especially those capable of speeds over 65 mph, with options like jack plates and performance props. Features No Feedback steering lock valves, low friction hydraulic steering system with ORB fittings on helm and cylinder, 4.0 turns lock to lock. Meets NMMA and ABYC requirements. Refer to application guide below to determine compatibility. Order HO57XX hoses, sold separately.

Nylon Windshield Brace Foot Kit with Tube Windshield Brace Kit includes two windshield brace feet and a 14-1/4" length of formed aluminum tube to be cut to size per individual application. Injection molded nylon brace feet inserts must be crimped in place. Installs with #10 PH screws (not included). Direct replacement for Taylor Made TMS-041. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Baystar Hydraulic Steering System for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables, and outboard engines with ABYC standard engine tilt tubes. For single station, single engine use only. BayStar is not intended for high speed, high performance type boats, such as bass boats. Low friction hydraulic steering system, 5 turns lock-to-lock. Balanced cylinder with compact design that fits most splashwells and provides full engine movement. Compact helm with small footprint, requires only 3" dash hole (standard or tilt).Packaged complete with helm, cylinder, fittings, tubing, oil, fill kit and detailed instructions. Standard 3/4" tapered steering shaft. Meets ABYC standards and NMMA certification requirements. Baystar Steering System is not for use on pontoon boats.

We have been working hard to make your shopping experience even better. In the last two months we have added 10 new product lines and about 1000 new products. • Webasto Air, Heat and Water Heaters are added • Westerbeke parts are being added daily • Universal Engine parts have about 327 more images • ADVENTURE MEDICAL KITS coming soon • If a product has a rebate or is on sale you will now know it when viewing the product details • We are adding Short Descriptions to the category view to help you find the item you want even faster • We still offer $6.95 ground shipping on about half of our products.

SilverSteer™ 2.0 High-Performance Front Mount Outboard Hydraulic Steering System - 1500PSI FM V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Features: Horsepower: Single engine, 350hp, dual engine, 600hp Helm: 7.3 cu in/120cc Hose: 1,500psi Turns Lock-to-Lock: 4.3 Included Equipment: UP25 F-SVS front mount helm pump, UC128/2-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately Steering Wheel: Sold separately Steering Wheel Shaft: 3/4" tapered Warranty: Two years

Steer Stop Outboard Hydraulic Steering Lock Set - 4" T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market.  With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal. Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands. Features: Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock: Locks hydraulic steering when trailering Fits most steering cylinder rods on outboard engines Snaps over outboards hydraulic steering cylinder rods Helps keep engine centered during transport Protects steering system, outboard, and motor supports Includes cord to connect units for storage and to aid in removal Grip makes it even simpler and easier to put on and take off WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.