|
Sierra solenoids for personal water craft.
|
57.99 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Portable, simple-to-use interface works on Microsoft PC laptops, Windows tablets or Microsoft Surface tablet running Windows 10. Recommended requirements are Windows 10/Intel I5 Dual Core processor @2.5 Ghz or greater. Recommended I7 Quad Core at 2.5 Ghz or greater/USB 2.0 or USB 3.0 Port/10 GByte of free hard disc space, Recommended 50 GBytes or greater/2 GBytes RAM, Recommended 6 GBytes or greater. Tablets running Windows 10 with a USB port (*Note: Windows 8 RT will not work with M.E.D.S). Processor must be I5 Dual Core at 2.5 Ghz or better/Screen resolution 1360x768 or higher. No need to hassle with entering in the make, model or even the serial number of the engine you're working on. Simply plug in the cable and let M.E.D.S. do the work for you. Bundle includes M.E.D.S. system cable(s), diagnostic port adapter cables, three installations of the M.E.D.S. software on flash drive, and carrying case. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED.
|
7428.20 |
|
|
Sierra replacement engine couplers for Mercruiser engines.
|
304.19 |
|
|
Sierra replacement plates for cooling systems.
|
3.49 |
|
|
Jabsco 5660-0001 Gray Marine Engine Pump
|
652.41 |
|
|
Sierra oil seals for prop shaft seals in Mercury and Mercruiser engines.
|
13.99 |
|
|
Sierra head gaskets for Johnson, Evinrude and BRP outboard engines.
|
35.99 |
|
|
GP2040-23 SystemPod Pre-Cut for Garmin 7408/7408xsv/7608/7608xsv & Space on Left f/12" Wide Guard
NavPod GP2040 Series for 12" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all Gen3 NavPods.
|
401.44 |
|
|
Solas intake grates are made of cast aluminum and finished with an epoxy powder coating making them resistant to corrosion and abrasion. The airflow section allows more water to flow consistently into the pump in order to eliminate cavitation and improve hook up ability. See Medart Marine general catalog for application guide.
|
148.99 |
|
|
Solas intake grates are made of cast aluminum and finished with an epoxy powder coating making them resistant to corrosion and abrasion. The airflow section allows more water to flow consistently into the pump in order to eliminate cavitation and improve hook up ability. See Medart Marine general catalog for application guide.
|
148.99 |
|
|
Replacement seals for various PWC applications. See Medart Marine general catalog for application information.
|
6.99 |
|
|
Replacement seals for various PWC applications. See Medart Marine general catalog for application information.
|
6.99 |
|
|
Solas intake grates are made of cast aluminum and finished with an epoxy powder coating making them resistant to corrosion and abrasion. The airflow section allows more water to flow consistently into the pump in order to eliminate cavitation and improve hook up ability. See Medart Marine general catalog for application guide.
|
148.99 |
|
|
Solas impeller wrench for removal and installation of PWC impellers. See Solas Impeller Accessories and Installation Guide in the Medart Marine general catalog for application information.
|
21.19 |
|