|
Sierra voltage regulators for Mercury/Mariner outboards.
|
120.99 |
|
|
Fits: 40, 50, 60 HP 4 stroke 4 cylinder 0P094500 & Up and 50, 60 HP EFI 4 stroke 4 cylinder, 0P153500 & Up.
|
334.99 |
|
|
Fits: 30, 40, 50, 60 HP, 4 Stroke 1999-Up Mercury; 40HP 2000 & Up 4-Stroke Yamaha. 9-tooth drive gear. Uses DV365 replacement drive gear, SR365 repair kit.
|
226.81 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Sierra fuel line assemblies meet or exceed both USCG safety regulations and EPA evaporative emissions requirements. Assemblies consist of engine connector, low-perm primer bulb and tank connectors. Designed to be used in connection with 18-8078 large bore 13mm tank adapter. 2-stroke DT model complete with 13mm tank adapter to replace small (11mm) and large (13mm) bore fuel line assemblies. 4-stroke DF model designed with 13mm quick-disconnect tank connector and a prong engine connector to replace most 15 to 140HP assemblies. Hi visibility display packaging.
|
91.59 |
|
|
Sierra screws and washers for Yamaha drive systems.
|
20.49 |
|
|
Sierra timing belts provide extended durability and smooth performance characteristics. Features include Neoprene or Nitrile construction; positive slip proof engagement; fiberglass tension member; chemical and contaminent resistance; modified curvilinear tooth or trapezoidal tooth profile for direct OE fitment/replacement. Meets or exceeds OEM specs.
|
54.99 |
|
|
March 815 PL C Beer Pump
March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).
At 60Hz
SystemUS Metric
Max Flow8 GPM 30.3 LPM
Max Head18.6 FT 5.7 M
Power0.04 HP 0.029 KW
At 50Hz
USMetric
7.9 GPM30 LPM
13.5 FT4.1 M
0.04 HP0.029 KW
Electrical: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/2"MPT
Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Max Internal Pressure: 50 PSI / 3.4 bar
Max Liquid Temperature: 250 °F / 121 °C
Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.
The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.
|
332.48 |
|
|
Sierra impellers for Yamaha outboards.
|
29.99 |
|
|
Sierra water pump kits for Johnson, Evinrude and BRP outboards. Kit includes housing.
|
112.39 |
|
|
Separates water and foreign particles from fuel. 10 Micron filter element with high pleat count. Rugged constrution for harsh marine environment. Compatible with E10 gasoline. For use on 175-300HP V6 and V8 4-stroke outboard engines. Will not filter 2-cycle oil.
|
111.29 |
|
|
For 4-stroke PWC applications. Replaces BRP 4-Tec 420956741, Yamaha SeaDoo 6M6-813E00-00.
|
13.99 |
|
|
Oberdorfer 104M-06-10F36BJ Centrifugal Pump
FEATURES
Pump Body: Bronze
Ports: Inlet: 3/4" NPT
Outlet: 1/2" NPT
Flow: 24 GPM Max
Pressure: to 23 PSI, 53 feet of head
Impeller: Centrifugal
Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available.
Shaft: 416 Stainless Steel is standard, Monel Shaft available for Marine Use
Motor Drive: Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you. This pump has the 10F36BJ-50/60-316SS motor.
APPLICATIONS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
Oberdorfer Centrifugal Pump, 1/3HP ODP 115/230V Motor 50/60 Hz, with 316SS Shaft
|
1298.70 |
|
|
Oberdorfer 104M-06-10F36BJ-50/60 Low Profile AC Pump
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT Female
Outlet: 1/2" NPT Female and 3/4" NPT Male
Flow:
Up To 24 GPM Maximum
Pressure:
Up To 23 PSI, 53 feet of head
Impeller:
Bronze Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Water Seal. Buna is Standard, Viton and Teflon available.
Shaft:
416 Stainless Steel is Standard, 316 Stainless Steel is an Upgrade, Monel is the Highest Grade of Stainless Steel and is Recommended for Salt Water Marine Use
Motor:
1/2 Horsepower, 3450 RPM, 115/230 Volts, Single Phase, ODP (Open Drip Proof). This pump has the Oberdorfer 7881 motor
APPLICATIONS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA J-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
|
1088.10 |
|
|
Oberdorfer 109MB-10J36BJ-50/60 Dometic Low Profile AC Pump
|
1755.94 |
|