Sierra relays for Yamaha.

Sierra Marine Engine Parts & Drive Parts   Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.   If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.   Warning: We can no longer ship engine parts International or to California Due to Prop 65.

Zinc Yamaha Trim Tab Anode for 200 - 300 HP Motors A trim tab anode helps counteract the torque that a propeller creates, and levels out "prop-walk," which is a propeller's tendency to rotate concerning a vertical axis. Also, trim tab anodes can absorb various types of corrosion, helping alleviate corrosion to other parts of the boat. Features:  Designed for 200-300 HP Yamaha motors Meant for saltwater boat use Boat type: Motorboat with outboard Specific: Outboard Specifications: Material: Zinc Weight: (lbs) 1.40 / (kg) 0.64 Dimensions: h: (inch) 1.18" / (mm) 30 h1: (inch) 2.36" / (mm) 60 Ø: (inch) 3.94" / (mm) 100 m: (mm) 10 x 1.25 *Sold as an Individual

Sierra float bowl gaskets.

Oberdorfer 104M-06-10F36BJ Centrifugal Pump FEATURES Pump Body: Bronze Ports: Inlet: 3/4" NPT Outlet: 1/2" NPT Flow: 24 GPM Max Pressure: to 23 PSI, 53 feet of head Impeller: Centrifugal Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available. Shaft: 416 Stainless Steel is standard, Monel Shaft available for Marine Use Motor Drive: Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you. This pump has the 10F36BJ-50/60-316SS motor.   APPLICATIONS BRONZE CLOSE COUPLED CENTRIFUGAL PUMP This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.   Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.   Oberdorfer Centrifugal Pump, 1/3HP ODP 115/230V Motor 50/60 Hz, with 316SS Shaft    

Oberdorfer 104M-06-10F36BJ-50/60 Low Profile AC Pump Pump Body: Bronze Ports: Inlet: 3/4" NPT Female Outlet: 1/2" NPT Female and 3/4" NPT Male Flow: Up To 24 GPM Maximum Pressure: Up To 23 PSI, 53 feet of head Impeller: Bronze Centrifugal Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Water Seal. Buna is Standard, Viton and Teflon available. Shaft: 416 Stainless Steel is Standard, 316 Stainless Steel is an Upgrade, Monel is the Highest Grade of Stainless Steel and is Recommended for Salt Water Marine Use Motor: 1/2 Horsepower, 3450 RPM, 115/230 Volts, Single Phase, ODP (Open Drip Proof). This pump has the Oberdorfer 7881 motor     APPLICATIONS BRONZE CLOSE COUPLED CENTRIFUGAL PUMP This close-coupled pump uses a standard NEMA J-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures. Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.

Sierra relays for Yamaha.

Sierra lower unit seal kit for Johnson, Evinrude and BRP outboard engines and OMC/Cobra sterndrive engines.

Heavy-duty trim/tilt motor only. Fits: 1997-UP 115 HP, 2000-UP 115 HP 4-Stroke, 1997-2000 130 HP, 1997-UP 150-200 HP, 1998-UP 225 HP. 2-wire connection, 4 bolt mount, ring terminal ends. Includes O-ring.

Fits OMC 60, 70, 90, 115, 150, 175, 200, 225 HP - 1991-Up, 120, 140 HP - 1991-94, 50 HP 3-cyl, 60 HP, V4 130 HP - 1995-UP, 115-200 HP - 1997-Up, 225 HP - 1998-99. 2-wire connection with female spade terminal ends, flat-blade shaft. Includes O-ring and adaptor to replace motors with hollow hex shafts. 4-bolt mount.

Sierra impeller kits Mercury and Mariner outboards.

Sierra vernatherm for Johnson, Evinrude and BRP outboard engines.

Sierra water pump repair kits with upper housing for Mercury outboards.

Complete coverage on everything from basic maintenance to complete engine or drive overhaul. Featuring simple-to-follow, step-by-step, illustrated procedures, hundreds of exploded views, photographs, tables, wiring diagrams, specifications, and user friendly indexes. Newer manuals contain a skill level rating system for each procedure as well as special tool icons.

Sierra water pump kits for Yamaha outboard engines.