|
High strength, low stretch synthetic cords resist shock load failure and assure uniform performance over the life of the belt. Special rubber compound in compression section assures smooth and even transfer of load forces to the cords. Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support.
|
55.99 |
|
|
High strength, low stretch synthetic cords resist shock load failure and assure uniform performance over the life of the belt. Special rubber compound in compression section assures smooth and even transfer of load forces to the cords. Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support.
|
13.39 |
|
|
High strength, low stretch synthetic cords resist shock load failure and assure uniform performance over the life of the belt. Special rubber compound in compression section assures smooth and even transfer of load forces to the cords. Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support.
|
26.99 |
|
|
High strength, low stretch synthetic cords resist shock load failure and assure uniform performance over the life of the belt. Special rubber compound in compression section assures smooth and even transfer of load forces to the cords. Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support.
|
31.99 |
|
|
High strength, low stretch synthetic cords resist shock load failure and assure uniform performance over the life of the belt. Special rubber compound in compression section assures smooth and even transfer of load forces to the cords. Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support.
|
28.39 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
High strength, low stretch synthetic cords resist shock load failure and assure uniform performance over the life of the belt. Special rubber compound in compression section assures smooth and even transfer of load forces to the cords. Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support.
|
27.99 |
|
|
High strength, low stretch synthetic cords resist shock load failure and assure uniform performance over the life of the belt. Special rubber compound in compression section assures smooth and even transfer of load forces to the cords. Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support.
|
33.99 |
|
|
Sierra replacement plates for cooling systems.
|
3.49 |
|
|
March TE-7S-MD 1.5hp 3 phase
March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1-1/2 inch female pipe thread, and the outlet is 1 inch male pipe thread. There are two standard motors. The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 110/220V 1 horsepower totally enclosed fan cooled motor. The second is a 3 Phase 60 hertz 208/230/460V and 50 hertz 190/380V 1 horsepower totally enclosed fan cooled motor. There are performance differences between the hertz options. The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7S-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including;
Applications for the TE-7S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
Great for Chemicals Including
The TE-7S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals.
Unit 60HZ 50HZ System US Metric US Metric Max Flow
53 GPM
200 LPM
47.5 GPM
180 LPM
Max Head
57.5 FT
17.5 M
39.4 FT
12 M
Power
1 HP
.745 KW
1 HP
.745 KW
Electrical
1PH 115/208/230V 60HZ, 110/220V 50HZ or 3PH 208/230/460V 60HZ, 190/380V 50HZ
On 50HZ, the Single Phase Motor is rated for 1 horsepower or 0.7457 kilowatts.
On 50HZ, the Three Phase Motor is rated for 1 horsepower or 0.7457 kilowatts.
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
Motor Options
Available in 1HP, 1.5HP, 1HP Explosion Proof or 1.5HP Explosion Proof
P/N
0155-0173-0300 (1 Phase 1HP) with Metal Motor Bracket
P/N
0155-0174-0300 (3 Phase 1HP) with Metal Motor Bracket
P/N
0155-0036-0300 (3 Phase 1.5HP) with Metal Motor Bracket
P/N
0155-0285-0100 (1 Phase 1HP) with Plastic Motor Bracket
P/N
0155-0286-0100 (3 Phase 1HP) with Plastic Motor Bracket
P/N
0155-0287-0100 (3 Phase 1.5HP) with Plastic Motor Bracket
|
2829.86 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0100 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0100
|
224.25 |
|
|
Water temperature sending unit, 1/2" -14 NPT threads. Replaces: Mercruiser 97258A1, OMC/Cobra 171960, Crusader 700427
|
25.99 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0200 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March AC-1A-MD-1/2 is suitable for your application, please contact March Pump.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0200
|
202.80 |
|
|
Marine Grade Electrical Wire Seal - Flat Cable, 14/3 to 12/3 AWG, 1/2" NPT
Liquid Tight Wire Seals provide low cost watertight cable entries into panels and junction boxes. UL and CSA approved to work with flat cable. Resistant to saltwater, gasoline, alcohol, ketones and mineral oil. Safe underwater to 300ft. (150 PSIG).
Features:
Flat Cable
AWG Range: 14/3 to 12/3
NPT Size: 1/2"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
7.97 |
|
|
ProPress 1/2" Copper Coupling w/o Stop - Double Press Connection - Smart Connect Technology
Features:
For use with ASTM B88 tubing
Copper
Press connection
Components:
EPDM sealing elements
|
7.48 |
|