|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Sierra replacement shift cables Mercruiser engines.
|
217.79 |
|
|
Sierra replacement shift cables Mercruiser engines.
|
259.79 |
|
|
Sierra replacement shift cables Mercruiser engines.
|
103.99 |
|
|
Sierra replacement shift cables Mercruiser engines.
|
195.99 |
|
|
Installs and removes shift cables on MC-I, R-MR, Alpha One, Alpha One/Gen II drive units. Use with 18-2190 and 18-2190E cables. Replaces: Mercury Marine 91-12037.
|
44.99 |
|
|
HOT FOOT™ Universal Original Foot Throttle for All Marine Engines
Now compatible with all Mercury 175-300 Pro XS outboard motors
The Original and ONLY real HOT FOOT™ Throttle
Drive your boat safer by driving it like your car. This is the one and only HOT FOOT™ throttle - the original boat foot throttle that has been on the market for 30+ years.
This throttle allows you to drive your boat like you do your car. You keep both hands on the wheel and control the throttle with your foot. The throttle returns to idle if you remove your foot. This throttle is a must-have for safe operation of high performance boats.
Features:
Drive your boat like you drive your car -- features make driving your boat fun and safe
Number one throttle on the market for over 20 years
Provides added safety and performance
Improves throttle control for all outboard and inboards
All cast aluminum and stainless steel hardware
Lightweight and resistant to corrosion
Stainless steel hardware and non-sticking teflon and nylon bearing surfaces for trouble free operation
Nylon and teflon bushings on all critical pivot points
Stainless steel spring returns engine to idle position when released
Equipped with toe clip for additional safety in extreme operating conditions
Uses standard control cables for easy hook-up (longer throttle cable not included)
Mounts directly to floor of boat with four screws (not included)
Patented Idle Stop for FICHT and Optimax Engines
Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
171.44 |
|
|
Type R - Stand Alone Remote
LOW COST SOLUTION - No need to change to hydraulic steering
EASY TO FIT - Simple to install kits
DISCREET INSTALLATION - All components mounted out of sight
TIME SAVING - Rudder feedback option mounts directly on drive
SAFE - Manual override without disengaging the autopilot
COMPATIBLE WITH ALL MAJOR AUTOPILOT BRAND ELECTRONICS simple solutions
for difficult installations
For mounting as a separate drive system with its own cable and mounting kit.
The Remote drive unit can be installed in any convenient location; it requires the addition of a second steering cable and connection kit. There are connection kits for Mercruiser or Volvo Penta stern drive engines, Outboard engines and a universal kit for inboard engines. The drive is mounted in a location away from the heat and vibrations of the engine. An interconnect cable is used to connect it to the engine steering system using one of the simple to mount connection kits.
|
1315.46 |
|
|
Type R - Stand Alone Remote
LOW COST SOLUTION - No need to change to hydraulic steering
EASY TO FIT - Simple to install kits
DISCREET INSTALLATION - All components mounted out of sight
TIME SAVING - Rudder feedback option mounts directly on drive
SAFE - Manual override without disengaging the autopilot
COMPATIBLE WITH ALL MAJOR AUTOPILOT BRAND ELECTRONICS simple solutions for difficult installations
For mounting as a separate drive system with its own cable and mounting kit.
The Remote drive unit can be installed in any convenient location; it requires the addition of a second steering cable and connection kit. There are connection kits for Mercruiser or Volvo Penta stern drive engines, Outboard engines and a universal kit for inboard engines. The drive is mounted in a location away from the heat and vibrations of the engine. An interconnect cable is used to connect it to the engine steering system using one of the simple to mount connection kits.
|
1315.46 |
|
|
Sterndrive System f/Mercruiser from 1994 & North American Volvo
from 1997 w/9' Cable
The heart of this pilot drive system is the remote drive. The drive unit is connected to the boat steering by a cable and connection kit.
The remote drive system is ideal for the following three types of engine application:
Stern drives also known as I/O drives or Z drives
Outboard engines up to 150HP
Inboard engines requiring traditional rudder steering
Features:
Low Cost Solution - No need to change to hydraulic steering
Easy to Fit - Simple to install kits
Discreet Installation - All components mounted out of sight
Time Saving - Rudder feedback option mounts directly on drive
Safe - Manual override without disengaging the autopilot
Compatible with all major autopilot brand electronics - simple solutions for difficult installations
|
1315.46 |
|
|
Use to easily remove or install intermediate shift cables in Mercury drives.
|
40.59 |
|
|
EV-400 Sail Evolution Autopilot
*Requires Type 2 or Type 3 Drive Unit
Features:
Heavy-duty, 30 Amp output for Type 3 Drives or ZF Sail Pod Drive Systems
Evolution Ai for superior performance
No calibration required
SeaTalkng Network Compatible
ACU-400 auxiliary power to SeaTalkng network
Includes p70s Autopilot Controller
Includes:
EV-1 Sensor Core
p70s Autopilot Control Head
ACU-400 Actuator Control Unit
Evolution Cabling Kit
The EV Sensor Core
At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.
Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
Features:
Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change
Flexible installation options
Mount above or below deck
Simple SeaTalkng connectivity to the control head and ACU
Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays
p70s Autopilot Control Head
The p70s is a push-button operation controller designed primarily for sailboats.
Features:
LightHouse user interface is simple and quick to use
Wide 160° viewing angles
Start up wizard helps you configure the pilot quickly and easily
Anti-reflective coating for improved visibility in bright sunlight
Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
Simple system and group dimming/illumination
Support for multiple data sources
SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)
ACU-400 Autopilot Control Unit (ACU)
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.
Support Drive Units
Heavy-duty, 30 Amp output for Type 3 Drives or ZF Sail Pod Drive Systems
Evolution Cabling Kit
1 x SeaTalkng Power Cable (0.4m)
1 x SeaTalkng Backbone Cable (5m)
1 x SeaTalkng Spur Cable (0.4m)
1 x SeaTalkng 5-way Connector Block
2 x SeaTalkng T-piece Connector
2 x SeaTalkng Terminator
|
3849.99 |
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
Shift Cable - 42060 G
Solenoid connection cable
One each solenoid shift
Length: 1M (3.3')
|
32.63 |
|
|
Complete coverage on everything from basic maintenance to complete engine or drive overhaul. Featuring simple-to-follow, step-by-step, illustrated procedures, hundreds of exploded views, photographs, tables, wiring diagrams, specifications, and user friendly indexes. Newer manuals contain a skill level rating system for each procedure as well as special tool icons.
|
55.99 |
|