Sierra Marine Engine Parts & Drive Parts   Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.   If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.   Warning: We can no longer ship engine parts International or to California Due to Prop 65.

Magneto type for panels up to 5/8" thick. Polyester housing is rust and corrosion proof. 4 position switch Accessory-Off-On-Start. Push to choke feature in Start position. Seven screw tab/threaded boss terminals. Supplied with hexagonal black plastic face nut and brass back up nut. Requires 7/8" mounting hole in panel. Ignition rated 15 Amp @ 12 VDC, Solenoid 30 Amp @12 VDC, Choke 7 Amp @ 12 VDC, Accessory 15 Amp @ 12 VDC.

Polyester switch with brass back up nut, knurled black plastic face nut with rubber cap. 5/8" max. panel thickness, hole size: 7/8". 15 amp@12VDC. 7 color coded wire terminals. Display packaged.

Polyester switch with brass back up nut, knurled black plastic face nut with rubber cap. 5/8" max. panel thickness, hole size: 7/8". 15 amp@12VDC. 6 tinned brass screw terminals . Display packaged.

Polyester housing is rust and corrosion proof. 4 position switch Accessory-Off-On-Start. Push to choke feature in Start position. 7 screw tab terminals. Fits many Mercury applications. Supplied with hexagonal black plastic face nut and brass back up nut. Requires 7/8" mounting hole in panel. Ignition rated 15 Amp @ 12 VDC, Solenoid 30 Amp @12 VDC, Choke 7 Amp @ 12 VDC, Accessory 15 Amp @ 12 VDC.

Polyester housing is rust and corrosion proof. 4 position Accessory-Off-Run-Start switch, supplied with brass back up nut and knurled black plastic face nut with rubber cap to seal out splash and spray. Requires 7/8" mounting hole in panel, max thickness 1-1/8". Ignition rated 15 Amp @ 12 VDC, Solenoid 30 Amp @ 12 VDC, Accessory 15 Amp @ 12 VDC.

Polyester housing is rust and corrosion proof. 4 position Accessory-Off-Run-Start switch, supplied with brass back up nut and knurled black plastic face nut with rubber cap to seal out splash and spray. Requires 7/8" mounting hole in panel, max thickness 1-1/8". Ignition rated 15 Amp @ 12 VDC, Solenoid 30 Amp @ 12 VDC, Accessory 15 Amp @ 12 VDC.

Push/Pull Switch Two-Position Two-position, off/on. For operating one set of lights or other accessory. These switches have large, easy-to-pull handles. They are commonly used for operating lights. 3/4" diameter chrome-plated knob, brass case. Include screw terminals for connection without a wire lug. For 12-volt D.C. only. Not external ignition protected. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Corrosion-proof polyester housing. 3-position off-run-start. Knurled black plastic with rubber cap, brass back up nut. Ignition Rating: 15 amp@12VDC, Accessory Rating: 15 amp@12VDC, Solenoid Rating: 30 amp@12VDC. Terminal type: 5 color coded wires. Max. panel thickness 5/8", requires 7/8" mounting hole in panel.

Polyester housing is rust and corrosion proof. 3 position Off-Run-Start switch with 3 screw tab terminals. Supplied with hexagonal black plastic face nut and brass backup washer or nut. Requires 7/8" mounting hole in panel. Maximum panel thickness is 5/8" for short shaft switch and 1-1/8" for long shaft switch. Ignition rated 15 Amp @ 12 VDC, Solenoid 30 Amp @ 12 VDC.

Polyester housing is rust and corrosion proof. 3 position Off-Run-Start switch with 3 screw tab terminals. Supplied with hexagonal black plastic face nut and brass backup washer or nut. Requires 7/8" mounting hole in panel. Maximum panel thickness is 5/8" for short shaft switch and 1-1/8" for long shaft switch. Ignition rated 15 Amp @ 12 VDC, Solenoid 30 Amp @ 12 VDC.

Polyester housing is rust and corrosion proof. 3 position switch "Off-Run-Start". Push to choke feature in "Start" position. Six color coded wire leads in sealed plastic base. Supplied with hexagonal black plastic face nut and brass back up nut. For Mercury control box applications. Ignition rated 15 Amp @ 12V DC, Solenoid 30 Amp @12V DC. Display packaged.

3-position magneto ignition switch. Off-run-start with push to choke. Ideal for DFI, EFI and MPI engines. Heavy duty potted construction. Minimal bleed per circuit. Display packaged.

3-position magneto ignition switch. Off-run-start with push to choke. Ideal for DFI, EFI and MPI engines. Heavy duty potted construction. Minimal bleed per circuit. Display packaged.

Rocker Switch UL Recognized and CSA Certified Single Pole Non-Illuminated Snap-in Mounting Replacement Switches for Paneltronics' Deluxe and Premier Panels Specifications: Maximum Contact Rating: 6 Amps @ 125VAC or 4 Amps @ 250VAC Contacts: Silver Plated Copper Terminals: Silver Plated Copper 1/4" (6.3mm) Quick Connects Operating Temperature: -4 deg F (-20 deg C) to 131 deg F (55 deg C) Housing and Actuator: Black Thermoplastic Flammability Rating: UL 94 V-2 Rated IEC 60529: IP40 Panel Thickness: 1/8" (3.18mm) Recommended Panel Cut-Out: 1.188" (30.18mm) x 0.468" (11.89mm)