|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Kills ignition when lanyard is pulled. For use with conventional or magneto ignitions. Seals out moisture and makes reconnection easier. 4 terminals allow selection of normally open or normally closed circuit. Panel thickness up to 1/4".
|
29.99 |
|
|
Flotec FPPM3600D Thermoplastic Pedestal Sump Pump 1/3 HP
The pedestal design is engineered for the easy installation and replacement of most other brands of pedestal pumps.
FEATURES
Replaces any existing brand of 1/3 HP pedestal pump
Long lasting thermoplastic construction
Quick, easy installation
Fits in a 12" diameter basin and offers a 1-1/4" discharge
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 3000 GPH
FLOW AT 10' LIFT: 2460 GPH
SWITCH TYPE: Vertical
SWITCH ON LEVEL: 10-1/2"
SWITCH OFF LEVEL: 2-1/2"
MINIMUM SUMP DIAMETER: 12"
MINIMUM SUMP DEPTH: 12"
DISCHARGE PIPE SIZE: 1-1/4" FNPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE:
CORD LENGTH: 6'
AMP DRAW: 3.5 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amps
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
|
178.62 |
|
|
Flotec FPPSS3000 Cast Iron Pedestal Sump Pump 1/3 HP
The pedestal design is engineered for the easy installation and replacement of most other brands of pedestal pumps.
FEATURES
Replaces any existing brand of 1/3 HP pedestal pump
Long lasting cast iron construction
Quick, easy installation
Fits in a 12" diameter basin and offers a 1-1/4" discharge
2 year limited warranty
BODY CONSTRUCTION: Cast Iron Base with Stainless Steel Column
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 3480 GPH
FLOW AT 10' LIFT: 2700 GPH
SWITCH TYPE: Vertical
SWITCH ON LEVEL: 10-1/2"
SWITCH OFF LEVEL: 2-1/2"
MINIMUM SUMP DIAMETER: 12"
MINIMUM SUMP DEPTH: 12"
DISCHARGE PIPE SIZE: 1-1/2" FNPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE:
CORD LENGTH: 6'
AMP DRAW: 3.5 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amp
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
|
319.02 |
|
|
Flotec FPSE2800A Thermoplastic Effluent Pump
The FPSE2800A provides the answer to many effluent/dewatering situations where 3/4" solids handling is all that is needed.
Automatic submersible effluent/dewatering pump
Capable of handling 3/4" solids - ideal for basement installations, laundry facilities, underground parking, grain storage and construction sites
Thermoplastic construction
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 3600 GPH
FLOW AT 10' LIFT: 2700 GPH
SWITCH TYPE: Tethered
SWITCH ON LEVEL: 11-1/2"
SWITCH OFF LEVEL: 4-1/2"
DISCHARGE PIPE SIZE: 2"
MINIMUM PIPE SIZE: 1-1/2"
MAXIMUM SOLID HANDLING SIZE: 3/4"
CORD LENGTH: 15'
AMP DRAW: 7 amps
VOLTAGE: 115v, 60 Hz
|
436.80 |
|
|
Ignition Safety Kill Switch
Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The ignition (gray cap) version functions in applications where the circuit is normally closed (complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is open (not complete), resulting in interruption of current to ignition and shutting off engine. The kill switch includes a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.25 |
|
|
Magneto Safety Kill Switch
Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The magneto (red cap) version functions in applications where the circuit is normally open (not complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is closed (complete), allowing grounding to a suitable ground such as a grounding block, the battery, or a suitable area on the engine itself. The kill switch includes a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.02 |
|
|
Universal Kill Switch with Floating Lanyard
This marine emergency cut-off Unversal Kill Switch with Floating Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. The housing is constructed of weatherproof injection molded nylon and Delrin with 0.250" brass terminals. The switch includes a floating lanyard approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 3/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.55 |
|
|
Replacement lanyards for emergency engine cut-off switches.
|
17.99 |
|
|
Kill Switch & Lanyard
Add safety to older boats easily. In an emergency, a quick pull on the lanyard stops the engine, preventing accidental runaway. Includes switch, lanyard, and disconnect clip. Contact engine manufacturer for specific installation instructions.
Features:
Nominal voltage is 12V/24V DC
Rated for 10A at 12V DC
7" 16 AWG wire leads for terminals
IP65
Same as Cole Hersee part number M-597
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.38 |
|
|
Universal Safety Kill Switch
The marine emergency cut-off Universal Kill Switch attaches to your life vest while operating a boat or personal watercraft and is designed to instantly cut battery power when detached. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. The housing is constructed of weatherproof injection molded nylon and Delrin with 1/4" brass terminals. The switch includes a lanyard approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 3/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.73 |
|
|
10 Key Kill Switch Universal Lanyard
This marine emergency cut-off 10 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 10 key 50” lanyard fits Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, Kawasaki, OMC, and Nissan kill switches.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.02 |
|
|
7 Key Kill Switch Universal Lanyard
This marine emergency cut-off 7 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 7 key 50” lanyard fits OMC, Johnson, Evinrude, Mercury, Mariner, Force, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.58 |
|
|
Kill Switch Replacement Lanyard
Replacement lanyard and disconnect clip
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.41 |
|
|
Kills ignition when lanyard is pulled. For use with conventional or magneto ignitions. Seals out moisture and makes reconnection easier. 4 terminals allow selection of normally open or normally closed circuit. Panel thickness up to 1/4".
|
32.99 |
|