|
Brass 3-Position Key Ignition Switch
Three Position Ignition Switch is constructed of stamped brass. For off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8”. Three screw terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Includes two keys. Available with or without rubber boot.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.44 |
|
|
3-Position Nylon Ignition Switch - OFF/Ignition/Start
Impact and corrosion-resistant switch fits standard 7/8" diameter hole and includes PVC boot for added weather protection.
Features:
Coded tumbler lock for added secutiry, includes two keys
Nominal voltage is 6-36V DC
Rated for 15A ignition, 5A start
#8-32 screw terminals
Fits panels upt to 7/8" thick
Same as Cole Hersee part number M-850
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.17 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Ignition Switch - 3 Position - Off/Ignition/Start
Marine-grade battery ignition and start switch suitable for harsh environments on land or sea.
Features:
Coded tumbler lock, includes two keys
Weather-resistant key slot and boot
The nominal voltage is 12V DC
Rated for ignition: 10A at 12V DC and start: 5A at 12V DC
#8-32 screw terminals
Fits panels up to 1" thick
Replaces Cole Hersee part number M-550-14
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.79 |
|
|
DC 3-Position Lighted Rocker Switch Panel
Switches have a built-in red indicator light and are designed for use in exposed marine applications. Splash proof fuseholders with 10 Amp fuses provide overcurrent protection
Width: 5-1/2"
Height: 4-1/8"
Depth: 3"
Current: DC
|
55.50 |
|
|
6008200 m-Series Selector 3 Position Battery Switch - Black
Switches isolated battery banks to all loads or combines battery banks to all loads.
Specifications:
Switch Type: Selector 3 Position
Color: Black
Switch Positions: 3
Battery Combine: No
Alternator Field Disconnect: No
Maximum Voltage: 32V DC
Continuous Rating: 300A
Battery Inputs: 2
|
43.87 |
|
|
8025 DC 3 Position Breaker Panel - White Switches
Features:
All positive, negative and grounding buses installed, fully pre-wired
Panels with meters include toggle switch for mounting up to 3 battery banks
All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit positions
Specifications:
Positions: 3
Nominal Voltage: 12v / 24v DC
Maximum Amperage: 100A
Height: 3.75"
Width: 5.25"
Included:
(3) 7210 A-Series White Toggle Circuit Breaker - Single Pole 15A
(1) 8030 Basic DC Panel Label Set - 30 Labels
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
153.56 |
|
|
8058 AC 3 Position Toggle Circuit Breaker Panel - White Switches
Features:
All hot, neutral, and safety ground buses installed, fully pre-wired
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit posistions
Maximum panel amperage - 100 Amperes
Specifications:
Positions: 3
Nominal Voltage: 120v AC
Maximum Amperage: 100A
Height: 3.75"
Width: 5.25"
Included:
(3) 7210 A-Series White Toggle Circuit Breaker - Single Pole 15A
(1) 8031 Basic AC Panel Label Set - 30 Labels
(3) 8034 LED - 120V AV Green
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
158.08 |
|
|
AC 3 Position (European)
PN: 8158
White Switches
Features:
All hot, neutral and safety ground buses installed, fully pre-wired
Label backlighting pre-installed
Detailed installation instructions and cutout template
All LEDs installed
Maximum panel Amperage - 100 Amperes
(3) 8A Single Pole Circuit Breaker
230 Volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
158.08 |
|
|
8259
Contura Switch Mounting Panels
3 Position Mounting Panel
Modular design permits easy assembly in groups of varying sizes
Designed for mounting in 6 different panel thicknesses:
0.06" (1.57mm) 0.09" (2.36mm) 0.13" (3.17mm)
0.19" (4.75mm) 0.25" (6.35mm) 0.38" (9.52mm)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
6.86 |
|
|
4-Position Brass Ignition Switch - Accessory/OFF/Ignition & Accessory/Start
Marine-grade battery ignition and start switch suitable for harsh environments on land or sea.
Features:
Coded tumbler lock, includes two keys
Nominal voltage is 12V DC
Rated for accessory: 10A at 12V DC, ignition: 5A at 12V DC, start: 5A at 12V DC
#8-32 screw terminals
Fits panels up to 1" thick
Same as Cole Hersee part number M-712
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.61 |
|
|
4 Position Brass Ignition Switch
Marine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off.
|
43.75 |
|
|
2 Position Brass Ignition Switch
Marine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off.
|
40.28 |
|
|
4 Position Sealed Ignition Switch
An extensive series of ignition switches that can also be used as rotary switches. Made of rugged engineering grade plastic, these switches stand up to mechanical shock and vibration, and will not corrode or rust. Has an integral Deutsch-type socket to make electrical connection quick and easy, and to exclude moisture and dust. UL-recognizedand tested to SAE J259 for ignition switches. Suitable for a broad range of voltages: 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC. Contacts are sealed front and back to IP67 (with connector installed). Many options available: 2- 3- or 4-position, with keys or actuator; with or without boot, various key code options, with or without anti-restart or spring return.
Some options (2 keys are provided with each keyswitch):
Single tumbler key code only - all locks are identical
Mixed key codes. 200 random key codes
10 mixed key codes.10 random key codes
Soft touch knob 81397
No lock, no knob. Switch has 1/4" D-shaft only, to accept customer's knob
Chrome-plated diecast lever 81254 instead of lock
|
41.66 |
|
|
Sand Cast Brass Chrome Plated Folding Step
This Folding Step has a patterned, texture finish for better traction. The spring loaded folding mechanism will keep the step in the open or closed position without rattling. Constructed of chrome plated sand cast brass. Installs with two FH fasteners (not included). Also see Sea-Dog® Stainless Folding Step (328020).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.02 |
|