Glass tube fuse. Bubble packed on card with inner, reusable storage box to keep spares organized & accessible.

Ampco KC2 1 1/4 X 1, Fluid End Aluminum Bronze 56J Frame

Glass tube fuse. Bubble packed on card with inner, reusable storage box to keep spares organized & accessible.

Sierra Marine Engine Parts & Drive Parts   Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.   If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.   Warning: We can no longer ship engine parts International or to California Due to Prop 65.

FINISH THOMPSON AC6HJS1V620B0118 HIGH HEAD 1 1/4 X 3/4 316SS Applications Chemical processing Printed circuit boards Pharmaceutical Waste water treatment Port Sizes   (Suction x Discharge) &  Connection Types:  1.25 x 0.75 NPT or BSP  1.5 x 1 Electropolished Tri-clamps  Maximum Specific Gravity:  up to 1.8  Maximum Working Pressure:  100 psi (6.9 bar)    @3450 RPM  @2900 RPM  Flow Range*:  3 to 100 gpm  0.68 to 18.2 m3/h  Maximum Head:  144.1 ft  31.1 m  Power Range**:  2 to 2.8 hp  0.81 to 1.44 kW *See Performance tab for individual impeller diameter capability **Smallest to largest impeller on 1.0 s.g.  Type:  Stainless Steel Mechanically Sealed High Head  Configuration:  Horizontal  Construction Materials:  316 Stainless Steel  O-ring Materials:  FKM, EPDM, Buna, or PTFE Encapsulated Silicone  Seal Type:  Bellows Type 21  Seal Materials:  Carbon, Ceramic, FKM, EPDM, SiC, Buna, or Kalrez®  Maximum Temperature:  300º F (149º C)

Three position off-on-on. First on position energizes one circuit. In second on position both circuits are energized. Mounting stem 1-1/4" long. 3/8" dia. Brass hex back-up nut, chrome plated brass face nut and chrome plated knob. 25amp@ 6VDC, 15 amps @ 12VD(MP39570 has a plastic knob and 3 screw type terminals) (MP39590 has a brass knob and 3-male 1/4" blade terminals)

Ampco Bi8202801-4.50, Bronze Impeller for KC2 1 3/4

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.250" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 0.87" x 0.47" x 0.41" Recommended Clamp Spacing: 3'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.06" x 0.63" x 0.56" Recommended Clamp Spacing: 3'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.5" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.625" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.75" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 1.0" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 5'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.25" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 1.22" x 0.47" x 0.41" Recommended Clamp Spacing: 3'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.54" x 0.63" x 0.56" Recommended Clamp Spacing: 3'