|
ATO plastic fuse holder for fuses up to 20 amps. 8" wire loop, 14 ga.
|
9.89 |
|
|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Black wire loop with plastic twist-lock case. 8" 14 gauge wire loop. Includes 20 amp SFE fuse. Display packaged.
|
8.99 |
|
|
Black 7" 14 ga. wire loop with black plastic twist-lock fuse holder and 20 amp fuse. Display packaged. WHILE QUANTITIES LAST.
|
9.99 |
|
|
AC / DC Single Pole Magnetic World Circuit Breaker
The World Circuit Breaker meets all American Boat and Yacht Council (ABYC) Standards, is UL 1077 Recognized, TUV Certified, CE marked for Europe, and CSA Certified for Canada.
PN: 7212
Color: Black
Amperage: 20 Amp
Delay: Standard
Features:
The industry standard circuit breaker for Blue Sea Systems electrical panels
Combines switching and circuit protection into a single device
Single pole Quick Trip models are designed specifically for electronics protection
"Trip Free" design cannot be held "ON" during fault current condition
Specifications
Circuit Breaker Type
Magnetic Hydraulic - Trip Free
Maximum Voltage
277 Volts AC / 65 Volts DC
Rated Switch Cycles
10,000@rated amperage and voltage
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.59 |
|
|
AC / DC Single Pole Magnetic World Circuit Breaker
The World Circuit Breaker meets all American Boat and Yacht Council (ABYC) Standards, is UL 1077 Recognized, TUV Certified, CE marked for Europe, and CSA Certified for Canada.
PN: 7213
Color: Red
Amperage: 20 Amp
Delay: Standard
Features:
The industry standard circuit breaker for Blue Sea Systems electrical panels
Combines switching and circuit protection into a single device
Single pole Quick Trip models are designed specifically for electronics protection
"Trip Free" design cannot be held "ON" during fault current condition
Specifications
Circuit Breaker Type
Magnetic Hydraulic - Trip Free
Maximum Voltage
277 Volts AC / 65 Volts DC
Rated Switch Cycles
10,000@rated amperage and voltage
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.59 |
|
|
Thermal AC/DC Circuit Breaker - 20 Amp
Thermal AC/DC Circuit Breakers are designed to protect an electrical circuit from damage caused by excess current. Vibration and shock resistant these push-to-reset circuit breakers are an economical alternative to magnetic breakers. Unlike sacrificial fuses they have the advantage of being resettable after tripping. Panel mounted compact design. Constructed of molded Bakelite with quick connect, terminal style, stamped brass contacts. Optional Thermal Breaker Boot (420839) provides additional protection in wet environments. 5-30A @ 125-250VAC. 32VDC.
Features:
Panel Depth: 3/16"
Amps: 20
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
4.98 |
|
|
ProSportHD 20 Gen 4 - 20 Amp - 2 Bank Battery Charger
ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode.
ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.
Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.
Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.
Features:
ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
Lightweight Design Up to 40% lighter compared to an epoxy filled charger
Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
Easy Installation and Operation Pre-wired with 6’ AC and DC cables
Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
3 Year Warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
263.99 |
|
|
ProSportHD 20 Plus Gen 4 - 20 Amp - 3 Bank Battery Charger
ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode.
ProSportHD's enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.
Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.
Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.
Features:
ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
Lightweight Design Up to 40% lighter compared to an epoxy filled charger
Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
Easy Installation and Operation Pre-wired with 6’ AC and DC cables
Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
3 Year Warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
275.99 |
|
|
Engine Shutdown - 5 Circuit with 20A Relays - Round Display for Volvo Engines
If a fire breaks out aboard a diesel-powered vessel, the engine(s) must be shut down prior to or during the discharge of a suppression system to effectively extinguish the fire. Continued engine operation may remove the agent, lowering the concentration required to effectively extinguish the fire, making an Engine Shutdown System necessary.
Consisting of a Shutdown Control Module and Helm Display Unit with an Override Button the Fireboy Engine Shutdown System is an effective means to automatically shut down engines, generators, and blower systems in the event of a fire.
Features:
For Volvo engines
Technical Specifications:
Operating Voltage: 9 to 38 VDC
Maximum Current Draw: 310mA @ 12 VDC
Operating Temperature: - 22°F (-6°C) to 158°F (70°C)
Circuits: Five (5) with 20 Amp relays
*Sold as an Individual
|
397.50 |
|
|
"A" Frame Magnetic Circuit Breakers
20 Amp
Double Pole
Standard branch AC or DC circuit breaker for Paneltronics electrical distribution panels
Meets all American Boat and Yacht Council (ABYC) Standards for non ignition protected circuit breaker
UL Recognized (UL 1077) for use in the U.S.A., and CSA Certified for use in Canada (ABYC E-11.12.2.8.
Trip free (ABYC E-11.12.1.7.2.2. and E-11.12.2.8.1.)
Manual reset (ABYC E-11.12.1.7.2.4. and E-11.12.2.8.1.)
|
23.94 |
|
|
Push Button Reset Only Screw Terminal Circuit Breaker - 20 Amps
Features:
Branch circuit breakers (can also be used for 24-hour circuit protection)
Quick connect terminal style circuit breakers are incorporated into Blue Sea Systems WeatherDeck Waterproof Circuit Breaker Panels, Dual Battery Bank Main Distribution Panels, and 360 Distribution Panels
Compact design enables high density circuit protection configurations
Push-to-reset operation
"Trip Free" design cannot be held "ON" during fault current condition
Ignition protected - Safe for installation aboard gasoline powered boats
Optional Push Button Waterproof Boot protects circuit breaker in wet environments, replaces dress nut mounting on circuit breakers and resists discoloration and cracking
Specifications:
Amperage: 20A
Maximum Voltage: 32V DC
Mounting: Panel Mount 3/8-27 UNS
Circuit Breaker Type: Thermal trip, manual push-button reset only
Terminal Type: #8 Screw
Interrupt Capacity: 3000A @ 14.7V / 2500A @ 28V
Minimum Operating Temperature: -10° C
Maximum Operating Temperature: 60° C
Screw Terminal Torque: 6 in-lb (0.68 Nm)
Weight: 0.09lb (0.04 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
4.80 |
|
|
Engine Shutdown - 5 Circuit with 20A Relays - Round Display
If a fire breaks out aboard a diesel powered vessel, the engine(s) must be shut down prior or during the discharge of a suppression system to effectively extinguish the fire. Continued engine operation may remove the agent, lowering the concentration required to effectively extinguish the fire, making an Engine Shutdown System necessary.
Consisting of a Shutdown Control Module and Helm Display Unit with an Override Button the Fireboy Engine Shutdown Systems is an effective means to automatically shut down engines, generators, and blower systems in the event of a fire.
Technical Specifications:
Operating Voltage - 9 to 38 VDC
Maximum Current Draw - 310mA @ 12 VDC
Operating Temperature - 22°F (-6°C) to 158°F (70°C)
Circuits - Five (5) with 20 Amp relays
*Sold as an Individual
|
397.50 |
|
|
"A" Frame Magnetic Circuit Breakers
20 Amp
Single Pole
Standard branch AC or DC circuit breaker for Paneltronics electrical distribution panels
Meets all American Boat and Yacht Council (ABYC) Standards for non ignition protected circuit breaker
UL Recognized (UL 1077) for use in the U.S.A., and CSA Certified for use in Canada (ABYC E-11.12.2.8.
Trip free (ABYC E-11.12.1.7.2.2. and E-11.12.2.8.1.)
Manual reset (ABYC E-11.12.1.7.2.4. and E-11.12.2.8.1.)
|
10.37 |
|
|
7313 COTS Military Grade A-Series 20 Amp
May be suitable for use when military specifications are required under CFR 46.
Specifications:
Amperage: 20A
Actuator Style: Metal Toggle
Poles: 2
Max Voltage: 277V AC, 65V DC
Circuit Breaker Type: Magnetic Hydraulic - Trip Free
Interrupt Capacity: 1500 A AC, 7500A DC
Min Operating Temp: -40°C
Max Operating Temp: 85°C
Mounting Boss: 1/2-32 Hex Nut SS
Mounting Nut Torque: 30"-lb
Screw Terminal Torque: 14"-lb
Switching Cycles: 6000 Electrical/4000 Mechanical
Terminal Screw: #10-32 SS
Weight: 0.13lb (0.06 kg)
UL 1077
|
71.16 |
|