|
Sierra Marine Engine Parts & Drive Parts
Sierra Marine is a trusted name in aftermarket replacement boat engine and drive parts. Sierra’s products are designed and engineered to exceed the high horsepower demands of today’s engines in the harshest marine environments. All Sierra products meet or exceed the original equipment part it replaces.
If you need help finding a part, we need, Make, Model, Year, Horsepower, and Serial number of your engine.
Warning: We can no longer ship engine parts International or to California Due to Prop 65.
|
|
|
Control Silent Electric Toilet Rocker Switch
2 function rocker switch control panel 12/24V for waste disposal and flushing.
Features:
Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
|
70.64 |
|
|
Medium Duty Battery Selector Switch w/Key Lock
Perko's 8501 Series battery selector switches are among the most popular battery switches ever produced. Their use of the traditional Perko bolt circle makes for easy installation, whether new or as a replacement. These switches can be mounted in numerous locations. And as ignition protected switches, they can be installed in the engine rooms of gasoline powered boats.
In addition to doing everything a battery disconnect switch does, battery selector switches permit battery selection (of two or more batteries) for specific purposes including starting engines, running accessories or even recharging. They allow for the use of one or more batteries in systems with one or more engines and facilitate putting batteries in parallel for emergency starting when one or both batteries are substantially discharged.
Perko battery switches are designed for surface mounting. Standard duty switches have a bright red polycarbonate housing for safety with a large easy-to-turn black knob. The housing of the heavy duty switches are red fiber-reinforced polycarbonate. Selector switches are designed with a "make before break" feature. This allows switching between the "1", the "ALL" and the "2" positions while the engine is running. Models with an "Alternator Field Disconnect" feature offer protection for Non-Unitized Alternators should the switch accidentally be turned to the "OFF" position with the engine running.
Versions of the 8501 Series switches offer additional features such as alternator disconnect and key lock security.
The 90° rotation feature allows users to feel the switches' position in no light situations and the classic shape of the knob makes it easy to turn.
High conductivity studs are long enough to handle more than 1 cable and strong enough for torque needed for secure connections. Optional spacer ring (PN 0462DP0RED) allows for the use of larger cables.
Specifications:
Diameter: 5-1/4"
Depth: 2-5/8"
For use with 6 to 50 Volt Marine Electrical Systems
Capacity - 250 AMPS Continuous, 360 AMPS Intermittent
When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running
|
73.54 |
|
|
Battery Selector Switch with AFD
Part No. 2110A
Description
Continuous Amps: 230
Momentary Amps: 345
Dimensions: 5"D x 2-3/4"H
Product Features
Alternator field disconnect (AFD) allows selection of any positions, including "off" without damage to alternator or electrical system. AFD is required on some electrical systems.
Heavy duty copper sweep contacts
"Make before break" contacts allow selection of all positions except "off" while engine is running
Use with 6, 12, 24 or 36 volt systems
New design is easy to retrofit into existing hole patterns
Built-in skirt protects connections
Exclusive flat 360 degree "sweep" contact design provides up to 60% more contact area than other switch designs
Surface or rear panel mounting
Marine grade construction
One year warranty
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.32 |
|
|
Metal Body Battery Disconnect Switch SPST - 6-12V
2484 Series Battery Disconnect Switches are 36V Single Pole, Single Throw (SPST) manual disconnect switches that can be used to disconnect the battery from the vehicle electrical system. Disconnecting the battery from the electrical system prevents potential thermal events and ensures the system shuts down during maintenance or emergency. Battery disconnect switches also prevent parasitic loads from draining the battery during inactivity.
Features:
Rugged steel case
Silver-plated contacts for high conductivity and low contact resistance
Removable Hencol key for security
The anti-rotation locator pin option enables ease of mounting
O-ring and gasket sealing options
Specifications:
Current Rating (Continuous) in Amps: 40
Current Rating (Inrush) in Amps: 250
Voltage Rating (Max): 6
Circuitry: SPST
Actuator: Diecast Lever
Contact Material: Copper
Housing: Plated Steel
Mounting Stem: Brass 3/4 - 16 thread 23/32 long fits panel through 3/16 thick
|
42.35 |
|
|
Compact Battery Selector & Main Disconnect Switches
Ignition Protected
For use with 12, 24 and 32 volt marine electrical systems
Higher rating than popular 8500 series switches
Same bolt patterns as popular 8500 series
Smooth, Positive Position Selector
Compact, Medium Duty Main Battery Disconnect Switch
|
59.89 |
|
|
Pro Installer 400A EZ-Mount Battery Selector Switch (1-2-Both-Off)
As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front. Never has installation been so easy and cabling so accessible. With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment. The outstanding performance and features of this powerful new generation battery switch appeal to both the installer and end user. All ratings, footprints and features of the EZ-Mount switch match the high quality of our standard switches.
Tested to UL1107 ignition protection, CE
Tinned copper 10mm (3/8") studs
Stainless steel washers/nuts
Fiber reinforced plastics
400A Continuous / 600A 5 mins Intermittent / 1500A 10 secs Cranking
Waterproof to IP66
Same interconnection height as Pro Installer
Removable knob allows isolation during servicing
3 removable sideplates for protection
Industry standard 3.85" x 3.85" footprint
Specifications
Mounting: Surface Only
Voltage: 48v DC (for 12-48v systems)
Rating: 400 Cont / 600 Inter / 1500 Crank
Dims: 3.85" x 3.85" x 3.62"
Operation: 1-2-Both-Off
Stud: 3x 10 mm (3.8")
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
58.00 |
|
|
Mini Battery Selector Switch
The 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with our distribution clusters, the 701S provides a simple economical way of separating two batteries. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.
Housed in the same dimensions as the 701, and includes the same removable side plates and back cover
Please note selector switches will not separate electronics from harmful engine starting spikes
Tin-plated copper studs and nuts
Ignition-protected
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.83 |
|
|
Compact Battery Selector & Main Disconnect Switches
Ignition Protected
For use with 12, 24 and 32 volt marine electrical systems
Higher Rating Than Popular 8500 Series Switches
Same bolt patterns as popular 8500 series
Smooth, positive position selector
Compact, Medium Duty Battery Selector Switch
|
62.24 |
|
|
Compact Battery Selector & Main Disconnect Switches
Ignition Protected
For use with 12, 24 and 32 volt marine electrical systems
Higher Rating Than Popular 8500 Series Switches
Same bolt patterns as popular 8500 series
Smooth, positive position selector
Compact, Medium Duty Battery Selector Switch w/ Key Lock
|
73.54 |
|
|
Compact Battery Selector & Main Disconnect Switches
Ignition Protected
For use with 12, 24 and 32 volt marine electrical systems
Higher rating than popular 8500 series switches
Same bolt patterns as popular 8500 series
Smooth, Positive Position Selector
Compact, Medium Duty Main Battery Disconnect Switch w/ Key Lock
|
71.12 |
|
|
Medium Duty Battery Selector Switch - 250A Continuous
Features:
For use with 6 two 50 Volt Marine Electrical Systems
Capacity - 250 AMPS Continuous, 360 AMPS Intermittent
When used with Non-Unitized Alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running
Specs:
Diameter: 5-1/4"
Depth: 2-5/8"
|
47.86 |
|
|
Electric Field Bilge Switch
All Whale bilge switches are designed and manufacturers with highest quality at heart. Combine these accessories with your whale bilge pump for a robust bilge system tailored to your vessel.
Features and Benefits
Environmentally friendly - no toxic mercury
Easy to install mounted on either horizontal or vertical surface (e.g.
bulkhead or hull)
Suitable for installations where amp draw is up to 15 amps
Compact design
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
41.15 |
|
|
Electric Field Bilge Switch With Time Delay
All Whale bilge switches are designed and manufacturers with highest quality at heart. Combine these accessories with your whale bilge pump for a robust bilge system tailored to your vessel.
Features and Benefits
Environmentally friendly - no toxic mercury
Easy to install mounted on either horizontal or vertical surface (e.g.
bulkhead or hull)
Suitable for installations where amp draw is up to 15 amps
Compact design
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
66.64 |
|
|
Mini Contour Battery Disconnect Switch - 275A Continuous
This switch offers a number of unique features, the highlight being the Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 degree position. This control knob also features an interchangeable labeling system allowing a full range of applications (Item # 713 or 715). Three removable side plates provide access of up to 1/0 cables. The rear cover insulating the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100°C (212°F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.
Features:
Can be either surface or recess mounted by cutting a 2.1" (52 mm) hole
Available with house knob (OEM # 701B-HB) or with chassis knob (OEM # 701B-CH)
Tin-plated copper studs and nuts
Ignition-protected
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
27.49 |
|