Scot Pump 48451X-3.75 Wet End 56C

Scot Pump 48451X-3/4HP MPU 3/4HP 1PH 56C Pump • Seawater Bronze case, impeller adapter • Seawater Bronze 7/8” shaft • Impeller keyed to stub shaft and secured by washer and locking assembly • O-ring case gasket    Motor • Standard NEMA frame motor • 1 and 3 phase

Scot 48451X-1.5HP Motor and Pump 48451X Impeller: 4.75" Ports: 1.5 X 1.5 NPT 1.5 HP TEFC 2850/3450 RPM   1/50/60HZ

Scot Pump 48451X-4.00 WET END B48451X400PE 56C

Scot Pump 48451XPE-4.75 WET END This Wet end comes with the 4.75" impeller

Scot Pump B48451X475B15XX Pump and Motor Replaces Dometic Pump 3341227 Impeller: 4.75" Ports: 1.5" X 1.5" NPT Motor: 1.5HP 1/50HZ TEFC   Material: Bronze

Scot Pump 48451X-1/2 HP MPU 1/2 HP 1PH Pump • Seawater Bronze case, impeller adapter • Seawater Bronze 7/8” shaft • Impeller keyed to stub shaft and secured by washer and locking assembly • O-ring case gasket    Motor • Standard NEMA frame motor • 1 and 3 phase

Scot Pump 48451X-1HP MPU 1HP 1PH 56C 4.00 Pump • Seawater Bronze case, impeller adapter • Seawater Bronze 7/8” shaft • Impeller keyed to stub shaft and secured by washer and locking assembly • O-ring case gasket    Motor • Standard NEMA frame motor • 1 and 3 phase   This is the complete motor and pump

Scot Pump 48372X-3/4HP MPU 72 1PH 3/4HP 4 IMP ODP Pump  Seawater Bronze case, impeller, adapter  Seawater Bronze 7/8 inch shaft  Mechanical seal is 7/8 inch diameter  Impeller is keyed to stub shaft and secured by a washer and locking assembly.  O-Ring case gasket   Motor – 2 Pole  Standard NEMA frame motor

Scot Pump 35067-3.00 Motor/Pump Unit • Compact • Enclosed Switch Compartment   Pump • All Bronze marine centrifugal pump Freshwater or seawater applications • Precision machined to close tolerances for consistent performance. • Hardware - Type 303 stainless steel • Semi-open impeller handles solids • 3.00" Impeller mounted on motor shaft • Heavy-duty, designed for continuous 24 hour – 7 day operation.   Shaft Seal • Rated at 75 PSI – 5 BAR • Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components   Motor – 2 Pole • Meets Coast Guard ignition protected requirements. The thermal protector and starting switch are in the enclosed outlet cover. • Sealed ball bearings • Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt • Dual frequency 50 Hz or 60 Hz single phase motors are available • Stainless steel shaft • Three phase motors are not available  

S-Hook - 4.8mm(3/16") Diameter S-hooks feature a closed eye and long return leg to ensure a positive attachment and avoid accidental release. Grade 316 stainless steel

S-Hook - 9.5mm(3/8") Diameter S-hooks feature a closed eye and long return leg to ensure a positive attachment and avoid accidental release. Grade 316 stainless steel

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

Scot Pump 3301229 Full Size Impeller for 48451X Impeller is 4.75"