435 Black Streak Remover - Pint (16oz) On deck all in one, easy-to-use No. 435 Black Streak Remover + Protector safely and effectively eliminates black streaks, tough stains, and freshwater spots from fiberglass surfaces. Quickly restores finish while leaving behind fast-bonding polymer surface protection. Safe for use on fiberglass, metal, and painted surfaces. Applications: Removes black streaks Removes tough stains Removes fresh water spots Provides protection as it cleans Designed for fiberglass, metal, and painted surfaces Tip: Always test the product first in a small, inconspicuous area to ensure the desired result.

Black Streak Remover - 32oz 303® Black Streak Remover will keep the siding of your RV looking like new by removing unsightly black streaks with ease. These black streaks occur naturally when dirt and rubber material from an RV’s roof come off after miles of traveling at high speeds. The powerful formula in 303® Black Streak Remover pulls this material and dirt from the surface and allows it to be wiped away, leaving a clean, streak-free finish. Features: Removes hard-to-clean black streaks and dirt Leaves a clean, streak-free finish Biodegradable and marine safe Great for use on RVs, Campers, Pop-Ups, Motorhomes, and Boats Safe on fiberglass, vinyl, metal, and painted surfaces Directions: Shake well before use. Use only on dry surfaces. Spray the product directly on the black streaks. Allow the product to remain on the surface for 2-3 minutes. Gently scrub and then wipe off with a wet towel, microfiber, or sponge. For stubborn stains, repeat as needed.

Eco Spray All & Black Steak Remover - 32oz Spray Eco Spray All and Black Streak Remover is a highly effective all purpose cleaner that is safer for use and safer for the environment.  It whisks away Black Streaks, grime, stains, oxidation, rust and oil.

920 Fiberglass Marine Cleaner - 16oz The ideal pre-wax item, No.920 cuts fast and finishes the smooth-removing film, mild-moderate UV oxidation/chalkiness, discoloration, and tough stains from fiberglass. Easy-to-use compound restores original color and gloss to facilitate the easy application of Collinite’s last-step waxes; improving wax bond, spread/coverage, and durability.  Features: Removes mild-moderate oxidation Removes black streaks Removes tough stains a wash will not Leaves a clean and smooth surface for follow-up wax Applications: For hand, dual action and rotary use Average spread/coverage: 250-500 sq. ft. Application By Hand: Place a nickel-sized amount of product on an applicator pad Rub in well over a section no bigger than a 2×2 ft. Use firm pressure and rub until just before the product starts to dry. Buff off with a microfiber towel to reveal a crisper, darker, and more reflective finish Application by machine: Place 5 small pea size dots onto the buffing pad. Do not over-saturate the pad. Only a small amount of product is needed Place pad on panel and turn on buffer to 5800 opm (orbits per minute). Make 2-3 section passes with firm pressure no larger than a 2×2 ft section. Lower machine speed to 4800 opm and make an additional 2-3 passes with less pressure. Buff until just before product dries and never dry buff Wipe off product residue from panel to reveal a clean, glossy, and beautiful finish *Sold as an individual

920 Fiberglass Marine Cleaner - 64oz The ideal pre-wax item, No.920 cuts fast and finishes the smooth-removing film, mild-moderate UV oxidation/chalkiness, discoloration, and tough stains from fiberglass. Easy-to-use compound restores original color and gloss to facilitate the easy application of Collinite’s last-step waxes; improving wax bond, spread/coverage, and durability.  Features: Removes mild-moderate oxidation Removes black streaks Removes tough stains a wash will not Leaves a clean and smooth surface for follow-up wax Applications: For hand, dual action and rotary use Average spread/coverage: 250-500 sq. ft. (for the 16oz version)  Application By Hand: Place a nickel-sized amount of product on an applicator pad Rub in well over a section no bigger than a 2×2 ft. Use firm pressure and rub until just before the product starts to dry. Buff off with a microfiber towel to reveal a crisper, darker, and more reflective finish Application by machine: Place 5 small pea size dots onto the buffing pad. Do not over-saturate the pad. Only a small amount of product is needed Place pad on panel and turn on buffer to 5800 opm (orbits per minute). Make 2-3 section passes with firm pressure no larger than a 2×2 ft section. Lower machine speed to 4800 opm and make an additional 2-3 passes with less pressure. Buff until just before product dries and never dry buff Wipe off product residue from panel to reveal a clean, glossy, and beautiful finish *Sold as an individual

Fiberglass Stain Lifter - Pint (16oz) Non abrasive, stain lifting gel, ideal for fiberglass. Chemically lifts waterline, rust, growth and tough exhaust stains. Especially well suited for new boats.

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

415 Color-Up Auto Cleaner - 16oz Removes film, mild oxidation/discoloration, brake dust, oil, grease, tar, bugs, stains, and more from clear coat/single stage paint, painted/non-painted metal & fiberglass. Also, brightens surface clarity and deepens shine while preparing the finish for follow-up a wax-improving bond, spread, and protective durability.  Features:  Contains no waxes or silicones Can act as a wax remover Economical, light-duty paint-cleansing compound  Applications: Not for glass, rubber, or trim  For both hand & dual-action polisher use Clear coat safe, for use on all colors *Sold as an individual

925 Fiberglass Marine Wax - 16oz For those in search of glistening fiberglass and lasting protection without the elbow grease of paste wax. Easy on, easy off last step wax provides both long-lasting protection to fiberglass while leaving behind a high gloss shine and durable protective coating that shields all season against weathering; UV, salt spray, and more. Ideal for wax-ready large surface area jobs where radiant shine, protective longevity, and timely job completion are all paramount. Features: Provides long-lasting weather protection Most machine-friendly last-step marine wax Clear coat safe Can be layered Wax coating is more durable than Collinite 870 but less durable than Collinite 885 Provides easier removal, but less buffing than 885 paste wax 925’s user-friendly formula is an excellent alternative for a shorter boating season, and it also suitable to be layered over the 885 Fleetwax Applications: For hand or machine use For use on contaminant-free gel coat, fiberglass For exterior marine detailing use Average Spread/Coverage: 1,200-2,000 sq. ft. *Sold as an individual

390 Pre-Wax Auto Polish - 16oz All new clear-coat safe, machine polish uses micro abrasives to safely eliminate minor paint defects like fine scratches/swirls, water spots, mild oxidation, and wash marks from the surface; finishing down to impart a smooth, high gloss shine and facilitating the easy application and improving the bond-of any of Collinite’s last step durable wax coatings; 845, 476 or 915. Features: Imparts a smooth, high gloss shine Facilitates the easy application and improves the bond of any of Collinite’s durable wax coatings Perfects finish for follow-up wax protection Handcrafted and poured in the USA Applications: Not for use on rubber or black trim Clear coat safe, machine-friendly Best results found by dual action polisher *Sold as an individual

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

Sikaflex® 295 UV - Black - 10oz Tube with Nozzle Exterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).   Features: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Areas of Application Sikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility. Product Benefits: Excellent application properties Resistant to aging and weathering Suitable for organic glasses Approved for the OEM market Wheelmark approved Surface Preparation: Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.  Application: Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C. Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead. Tooling & Finishing Tooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use.  Removal Uncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin. Overpainting Sikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area.

Ultimate Leather Detailer - 16oz Meguiar’s Ultimate Leather Detailer provides a quick & easy solution to maintain your leather’s look & feel. Powerful cleaning ingredients safely remove dirt & grime to restore leather’s natural appearance. Aloe and rich conditioning agents provide a soft and supple feel and look. UV blockers and protective polymers work together to keep your leather protected. The result is clean, nourished, and protected leather that has a deep, rich satin gloss making your leather look its best. Features: ONE EASY STEP: Premium 3 in 1 cleans, conditions & protects leather in one easy step  NON-GREASY FORMULA: Creates a rich, satin gloss without a greasy look or feel  LEATHER CLEANER: Quickly & safely cleans removing dirt & grime restoring the original appearance  LEATHER CONDITIONER: Conditioners moisturize leather for a supple look & feel UV PROTECTION: Durable polymers & UV blockers protect & maintain leather

Extreme Marine - APC / Interior Multi-Surface Cleaner Today’s watercraft have a myriad of unique surfaces with many types of stains, but Extreme Marine Multi-Surface Cleaner makes quick work out of them thanks to its safe-yet-effective spray, scrub and wipe formula. Perfect for making seating surfaces like new, removing streaks from fiberglass, or even stains from carpet. Features: Quickly removes dirt, grime, black streaks and grease from many marine surfaces Super effective on vinyl seating, canvas, outboard motors, non-skid, fiberglass and gel coat Can be applied by spraying onto a towel and wiping, or spraying and scrubbing with a brush, followed by rinsing away

Extreme Marine - APC / Interior Multi-Surface Cleaner - *Case of 6* Today’s watercraft have a myriad of unique surfaces with many types of stains, but Extreme Marine Multi-Surface Cleaner makes quick work out of them thanks to its safe-yet-effective spray, scrub and wipe formula. Perfect for making seating surfaces like new, removing streaks from fiberglass, or even stains from carpet. Features: Quickly removes dirt, grime, black streaks and grease from many marine surfaces Super effective on vinyl seating, canvas, outboard motors, non-skid, fiberglass and gel coat Can be applied by spraying onto a towel and wiping, or spraying and scrubbing with a brush, followed by rinsing away