|
Heat Shrink Butt Connector - #8 *25-Pack
Ancor heat shrink connectors offer heat-activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water-tight seal and the ultimate vibration and strain relief.
|
31.76 |
|
|
Heat Shrink Butt Connector - #8 *3-Pack
Ancor heat shrink connectors offer heat-activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water-tight seal and the ultimate vibration and strain relief.
|
4.92 |
|
|
Heat Shrink Butt Connector Multi-Pack - 250-Piece - Jar
Reusable jar is clear for easy identification of the terminals and has a flip lid for ease of use.
Contains:
(50) 22-18 AWG Connectors
(150) 16-14 AWG Connectors
(50) 12-10 AWG Connectors
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
81.83 |
|
|
Heat Shrink Butt Connectors 22-10 - Assortment *40-Pack
Features:
Heat Shrink Butt Connectors
Assorted
22-10
40-Pack
|
13.90 |
|
|
16-14 AWG Heat Shrink Butt Connector - 3 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #16-14 AWG
Insulation Color: Blue
Max Wire Insulation Outer Diameter (inch): 0.21"
Package Size: Three
|
2.54 |
|
|
Adhesive Lined Heat Shrink Butt Connector Multi-Pack - 75-Piece
Reusable case contains six compartments for storage of terminals, fasteners or any other small item.
Contains:
(25) 22-18 AWG Connector
(25) 16-14 AWG Connector
(25) 12-10 AWG Connector
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.94 |
|
|
22-18 AWG Heat Shrink Butt Connector - 25 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #22-18 AWG
Insulation Color: Red
Max Wire Insulation Outer Diameter (inch): 0.19"
Package Size: Twenty-five
|
17.65 |
|
|
16-14 AWG Heat Shrink Butt Connector - 25 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #16-14 AWG
Insulation Color: Blue
Max Wire Insulation Outer Diameter (inch): 0.21"
Package Size: Twenty-five
|
17.65 |
|
|
12-10 AWG Heat Shrink Butt Connector - 25 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #12-10 AWG
Insulation Color: Yellow
Max Wire Insulation Outer Diameter (inch): 0.28"
Package Size: Twenty-five
|
24.37 |
|
|
22-10 AWG Heat Shrink Butt Connectors - 10 Pack
Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.
Features:
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
UL listed and CSA recognized
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.14 |
|
|
22-18 AWG Heat Shrink Butt Connector - 3 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #22-18 AWG
Insulation Color: Red
Max Wire Insulation Outer Diameter (inch): 0.19"
Package Size: Three
|
2.50 |
|
|
22-18 AWG Heat Shrink Butt Connector - 100 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #22-18 AWG
Insulation Color: Red
Max Wire Insulation Outer Diameter (inch): 0.19"
Package Size: One-Hundred
|
35.75 |
|
|
16-14 AWG Heat Shrink Butt Connector - 100 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #16-14 AWG
Insulation Color: Blue
Max Wire Insulation Outer Diameter (inch): 0.21"
Package Size: One-hundred
|
35.75 |
|
|
12-10 AWG Heat Shrink Butt Connector - 3 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #12-10 AWG
Insulation Color: Yellow
Max Wire Insulation Outer Diameter (inch): 0.28"
Package Size: Three
|
3.17 |
|
|
12-10 AWG Heat Shrink Butt Connector - 100 Pack
Butt splices are crimp connectors used to safely connect one or more wires to another wire. Step-down butt splices are meant to connect a higher-gauge wire to a lower-gauge wire. They could also be used to connect two or more smaller-gauge wires to a single wire. When selecting which type to get, pay special attention to whether they are epoxy lined or not. Many manufacturers do not line the interior of their butt splices with meltable glue. This epoxy reacts to heat and expands, creating a superior, environmentally sealed connection.
Features:
Made from tinned copper and various insulations
Up to 600 Volts
Not applicable to all styles
Operating Temp: -55°C to 125°C
UL, CSA, RoHS Compliant
Benefits & Protections
Impact Resistant
Multiple Uses
Long Term Protection
Easy to Install
Specifications:
Wire Range: #12-10 AWG
Insulation Color: Yellow
Max Wire Insulation Outer Diameter (inch): 0.28"
Package Size: One-hundred
|
49.34 |
|