ROKK 10W Nest Waterproof Wireless Phone Charging Pocket The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard. The unique technology is housed in an IPX6, fully encapsulated and sealed unit. The most convenient way to store and wirelessly charge your phone onboard indoors or out!  Nest safely houses & wirelessly charges your phone at the same time.  Now you can keep your phone in a safe place on board, tucked away, charged, and ready to go!  Perfect for integration into consoles, seating, cabinetry, and more!  Simply slide your phone into the pocket and instantly start wirelessly charging.  The super grippy mat stops your phone from sliding around inside.  The front lip with an easy-access thumb bevel acts as a safety barrier, ensuring your phone stays in the Nest! Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Compatible with all Qi Wirelessly charging electronics. Rounded corners and tapered front design eliminate all snagging risks, making it possible to install in high traffic areas of the boat where phone charging/storage until now has been impossible. One easy cut into your chosen mounting location,4 screws supplied for fixing, and a front fascia to leave the finished result clean and uncluttered –you're now ready to Store. Charge. Connect! Worried about getting water inside?  No problem!  Nest automatically drains either out of the front or through the self-drill drains out of the rear of the housing with the option to use a push-fit drain tube to route water away.  Dual functionality - featuring an intelligent Foreign Object Detection, Nest is perfect for storing your other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat – nothing else! Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max: -2A   Output Power: 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Pocket w/bezel Wireless charger Mounting hardware Instruction manual *Sold as an Individual 

ROKK 10W Cove LED Wireless Phone Charging Pocket Cove LED 10W safely houses & wirelessly charges your phone at the same time.  Now you can keep your phone in a safe place on board, tucked away, charged, and ready to go! The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique 10W technology housed in an IPX5, fully encapsulated and sealed unit. The most convenient way to store and wirelessly charge your phone onboard indoors or out!  Cove 10W safely houses & wirelessly charges your phone at the same time.  Now you can keep your phone in a safe place on board, tucked away, charged, and ready to go!  Our clever design reduces the installation depth by storing and wirelessly charging the phone sideways.  Perfect for integration into consoles, bulkheads, seating, cabinetry, and more! Slide your phone into the pocket and instantly start wirelessly charging. The internal grippy mat stops your phone from sliding around and its rubberized front lip with an easy-access thumb bevel acts as a safety barrier, making sure your phone always stays safe. Cove’s LED front panel features passive air vents, encouraging cool air into the pocket and through rubber cooling channels, keeping your phone cooler for longer.  This gives you the most efficient outdoor wireless charge possible. Cove LED 10W features our waterproof LED RGB lights, allowing you to link in with any RGB control system to match your lighting around the boat seamlessly.  Perfect to match your speakers, deck, and underwater lighting. Our Cove LED 10W lighting is fully dimmable as well so you can alter light levels to suit your mood. It lets you create your own ambiance, from a relaxing soft glow to strobing party boat! Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Compatible with all Qi Wirelessly charging electronics. Place your phone onto the center of the charging mat and instantly start wirelessly charging. Rounded corners and tapered front design eliminate all snagging risks, making it possible to install in high-traffic areas of the boat where phone charging/storage until now has been impossible. Cove LED is a part of our IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range that enables wireless charging for the outdoor environment without phone charging cables. Small and compact, our charging mat design suits any boat type, unlocking charging possibilities onboard. One easy cut into your chosen mounting location, 4 screws supplied for fixing, and a front fascia to leave the finished result clean and uncluttered –you're now ready to Store.  Charge.  Connect! Cove LED is perfect for storing your other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max. - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Pocket w/bezel Wireless charger Mounting hardware Instruction manual *Sold as an Individual 

ROKK 10W Catch Waterproof Wireless Phone Charging Mat Catch 10W is one of the most convenient ways to store and wirelessly charge your phone onboard indoors or out! Designed to install onto any flat surface, perfect for use on top of boat consoles. Place your phone onto the center of the charging mat and start wirelessly charging. The cleverly designed edging bumpers stop your phone from sliding out, and lets the mat Catch your phone from any angle! Constructed from our Closed Cell EVA foam, Catch offers excellent shock absorption and anti-vibration for your phone while being extremely hard-wearing, waterproof, and self-draining, stopping bacteria and mildew from building up.  The catch is a part of our IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range that enables wireless charging for the outdoor environment without phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit. Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Compatible with all Qi Wirelessly charging electronics. Place your phone onto the center of the charging mat and instantly start wirelessly charging. Constructed from our Closed Cell EVA foam, Catch offers excellent shock absorption and anti-vibration for your phone while being extremely hard-wearing, waterproof, and self-draining, stopping bacteria and mildew from building up.  The catch is a part of our IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range that enables wireless charging for the outdoor environment without phone charging cables. Small and compact, our charging mat design suits any boat type, unlocking charging possibilities onboard. Simple Install with one easy cut (2.5” (65mm) hole saw) into your chosen mounting location, then peel off the 3M self-adhesive backing paper and firmly press down.  Connect to a 12/24V power source.  The catch is perfect for storing your other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max: - 2A   Output Power: 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Charging mat Wireless charger Instruction manual *Sold as an Individual 

ROKK 10W Cove Wireless Phone Charging Pocket Cove 10W safely houses & wirelessly charges your phone at the same time.  Now you can keep your phone in a safe place on board, tucked away, charged, and ready to go!  The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique 10W technology housed in an IPX6, fully encapsulated and sealed unit. The most convenient way to store and wirelessly charge your phone onboard indoors or out!  Cove 10W safely houses & wirelessly charges your phone at the same time.  Now you can keep your phone in a safe place on board, tucked away, charged, and ready to go!  The clever design reduces the installation depth by storing and wirelessly charging the phone sideways.  Perfect for integration into consoles, bulkheads, seating, cabinetry, and more!  Slide your phone into the pocket and instantly start wirelessly charging. The internal grippy mat stops your phone from sliding around and its rubberized front lip with an easy-access thumb bevel acts as a safety barrier, making sure your phone always stays safe.  Cove’s front panel features passive air vents, encouraging cool air into the pocket and through rubber cooling channels, keeping your phone cooler for longer.  This gives you the most efficient outdoor wireless charge possible. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Compatible with all Qi Wirelessly charging electronics. Place your phone onto the center of the charging mat and instantly start wirelessly charging. Rounded corners and tapered front design eliminate all snagging risks, making it possible to install in high-traffic areas of the boat where phone charging/storage until now has been impossible. The cove is a part of our IPX6 waterproof 12/24V Qi-certified waterproof wireless charging range that enables wireless charging for the outdoor environment without phone charging cables. Small and compact, our charging mat design suits any boat type, unlocking charging possibilities onboard. One easy cut into your chosen mounting location, 4 screws supplied for fixing, and a front fascia to leave the finished result clean and uncluttered –you're now ready to Store.  Charge.  Connect! The cove is perfect for storing other personal items such as wallets and keys as the charger will only begin to charge when a phone is placed on the mat. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max. - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Pocket w/bezel Wireless charger Mounting hardware Instruction manual *Sold as an Individual 

ROKK 10W Edge Wireless Phone Charging Mount The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit. Right up to the Edge - with the smallest footprint, Edge now means you have even more choice of how and where you install your phone mount and charger combo.  Crowded consoles, side-mounting, and flat and vertical surfaces are all suitable. Put your phone on its Edge - Rotate it from portrait to landscape to view your favorite navigation app or simply fine-tune the position for the optimum viewing angle. 12/24V and IPX6 waterproof, ROKK Wireless – Edge is perfect for boat consoles tight on space or any vehicle working outside in the elements, with the simple one-handed operation you can easily dock and instantly start charging your phone.  No cable is required. The self-aligning, high-grip jaws accommodate all wireless charging phones and securely hold your device in the optimum charging position every time.  Couple this with the innovative adjustable body of Edge and you’ll have your phone fully charged, right where you need it. Install Edge 10W on any surface: a secure 3-point fixing system and a footprint of just 50mm (1.96”) diameter maximize your choice of location and a watertight cable pass-through completes the install. Our upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Featuring Qi-certified wireless technology and a “Smart” LED that indicates when your phone is charging.  Throw in foreign object detection and thermal cut-off and you’re guaranteed safe, reliable charging in all environments.  Charging is also possible through non-metallic, waterproof cases.  Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Install Edge on any surface - a secure 3-point fixing system and a footprint of just 50mm (1.96”) diameter maximize your choice of location and a watertight cable pass-through completes the install. Compatible with all Qi Wirelessly charging electronics. Includes a “Smart” LED that indicates when your phone is charging.  Throw in foreign object detection and thermal cut-off and you’re guaranteed safe, reliable charging in all environments.  Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (H x L) - 7.71" (196mm) x 3.7" (94mm) In the Box: Charger/Mount Instruction manual  *Sold as an Individual

ROKK 10W Sub Wireless Integrated Charging Pad Engineered to bond underneath & wirelessly charge through all non-metallic materials; GRP, fabric, leather, wood, carbon fiber, and all leading marine traction products, e.g SeaDek and MarineMat.  The result is wireless phone charging capabilities with your finished aesthetic. The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables. Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Your chosen charging area will be completely flush with its surrounding environment and allows for custom branding. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Compatible with all Qi Wirelessly charging electronics. Unlimited Charge Possibilities - whether you want to integrate wireless charging at the helm, cockpit table, seating areas, bedrooms, or even areas that may be stood on, it’s all possible.  Let your creativity run free and integrate wireless charging into new materials, fabrics, and in high traffic areas of the boat that until now have been off-limits. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max: - 2A   Output Power: 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Charging pad Instruction manual  *Sold as an Individual

ROKK 10W Waterproof Wireless Charger - Hidden The IPX6 waterproof 12/24V Qi-certified phone waterproof wireless charging range enables charging in the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit. Working directly with 12/24V systems, Scanstrut ROKK Wireless is ideal for life on the move and perfect for sailing, powerboats, and RV.  Easy install, anywhere you need your phone - indoors or out.  No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe charging anywhere on board. Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Installation is simple on any boat, RV, ATV, or outdoor location.  Sub-surface, hidden from view but always ready to charge.  Engineered to be installed under the surface, leaving the top surface uncluttered and perfect.  Compatible with all Qi Wirelessly charging electronics. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x H) - 3.93" (100mm) x .57" (14mm) In the Box: Charger Locking ring Mounting hardware Instruction manual  *Sold as an Individual

ROKK 10W Wireless Active Charging Cradle for Phone  The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard. The unique technology is housed in an IPX6, fully encapsulated and sealed unit. The simple one-handed operation allows you to dock your phone easily and instantly start charging, perfect for boat consoles or any vehicle working outside in the elements.  No connection is needed. The high-grip, self-aligning jaws ensure your phone is held tightly and in the optimum charging position every time. Featuring Qi-certified wireless charging technology and a “Smart” LED that indicates when your phone is charging.  Throw in foreign object detection and thermal cut-off and you’re guaranteed safe, reliable charging in all environments. Compatible with wireless charging-enabled phones of all sizes from all major brands including Samsung, Apple, and many more.  Charging is also possible through non-metallic, waterproof cases. Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Installation is simple on any boat, RV, ATV or outdoor location.  Four screws secure the unit onto any flat surface with a simple installation guide and drilling template.  A waterproof cable pass-through completes the IPX6 sealed installation. Compatible with all Qi Wirelessly charging electronics. Includes a “Smart” LED that indicates when your phone is charging.  Throw in foreign object detection and thermal cut-off and you’re guaranteed safe, reliable charging in all environments.  Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.1A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x L) - 2.9" (74mm) x 8.1" (206mm) In the Box: Charger/Mount Instruction manual  *Sold as an Individual

ROKK Wireless Nano 10W Waterproof 12/24V Charger Dock. Charge. Connect. Nano 10W is our smallest wireless phone charging mount. It squeezes big features into a tiny package! Designed to be installed where space is at a premium, Nano 10W holds and wirelessly charges your phone at the same time! The ultra-compact design can be installed and used in any orientation, unlocking new charging possibilities. Now you can keep your phone within reach, charged, and ready to go. The IPX6 waterproof, 12/24V wireless range enables phone charging for the outdoor environment, without the need for cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard. Perfect for boat consoles or any vehicle working outside in the elements, Nano 10W has been designed to fit even the largest phones. Nano 10W features Qi-certified wireless charging technology with foreign object detection and thermal cut-off to guarantee your devices are kept safe and charged while onboard. The upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Nano 10W is compatible with all wireless charging-enabled phones of all sizes from all major brands. Charging is also possible through non-metallic, waterproof cases.  Usage Nano 10W is at home in coastal and freshwater. If you require a wireless phone charging mount for rough conditions, we recommend our ROKK Wireless – Active 10W or Edge 10W.   Testing ROKK Wireless Nano has been subjected to a high level of environmental, vibration, impact and on-water testing programs. This is combined with our world-renowned expertise in waterproofing technologies, UV stabilization techniques and premium-grade materials, ensuring Nano 10W is up to the challenge of life outdoors. Installation Installation is simple on any boat, RV, ATV or outdoor location. Four screws secure the unit onto any flat surface with a simple installation guide and drilling template. For the best phone grip performance, a vertical installation is recommended. The charger is easy to clean and can be washed down with fresh water. Features: 10W Fast Charging IPX6 Waterproof Qi Certified Mount & charge Outdoor-ready grip

ROKK 10W Waterproof Wireless Charger - Surface Mount The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment without needing phone charging cables.  Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use on board, with the unique technology housed in an IPX6, fully encapsulated and sealed unit. Working directly with 12/24V systems, ROKK Wireless is ideal for life on the move and is perfect for sail and powerboats, and also RV.  Easy install, anywhere you need your phone - indoors or out.  No more wires! Exceeding the latest and highest standards of the Qi wireless protocol, ROKK Wireless is independently certified to deliver ultra-safe, wireless charging anywhere on board. Our new upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Our improvements don’t just stop there, now featuring easier phone alignment with a larger charging area, and electrical componentry that has been enhanced to significantly improve your phone's charge times, even in the harshest outdoor environments. With the same great look, ROKK Wireless is tried and tested in all corners of the globe in all weathers, and conditions. Sub-surface, hidden from view but always ready to charge.  Engineered to be installed under the surface and leave the top surface un-cluttered and looking perfect. Simply etch in your logo to identify the charge location. Ideal for GRP or wood, the unit can be installed under tables, cabinets, consoles, or worktops.  The installation system is simple to install and works with various panel depths and materials. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Installation is simple on any boat, RV, ATV or outdoor location.  Four screws secure the unit onto any flat surface with a simple installation guide and drilling template.  A waterproof cable pass-through completes the IPX6 sealed installation. Compatible with all Qi Wirelessly charging electronics. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max - 2A   Output Power - 10W (9V,1.A) IPX6 Waterproof Qi-certified wireless charging Protection - UV Resistant Dimensions (W x H) - 3.86" (98mm) x .67" (17mm) In the Box: Charger Mounting hardware Instruction manual  *Sold as an Individual

ROKK Sub Wireless Integrated Charging Pad Engineered to bond to underneath & wirelessly charge through all non-metallic materials; GRP, fabric, leather, wood, carbon fibre and all leading marine traction products,e.g SeaDek, MarineMat. The result is wireless phone charging capabilities with your finished aesthetic. The IPX6 waterproof 12/24V Qi certified waterproof wireless charging range enables wireless charging for the outdoor environment, without the need for phone charging cables. Your chosen charging area will be completely flush with its surrounding environment and allows for custom branding. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard, with the unique technology is housed in an IPX6, fully encapsulated and sealed unit. Case Compatibility: ROKK wireless is designed to work with most slimline phone cases up to .11" (3mm) Features: Compatible with all Qi Wirelessly charging electronics. Unlimited Charge Possibilities - whether you’re wanting to integrate wireless charging at the helm, cockpit table, seating areas, bedrooms or even areas that may be stood on, it’s all possible.  Let your creativity run free and integrate wireless charging into new materials, fabrics and in high traffic areas of the boat that until now have been off-limits. Technical Specifications: Input Voltage Range - 10-30V DC (12/24V system)  Input current max: -1.5A   Output Power: 5W (5V,1A) IPX6 Waterproof Qi-certified wireless charging In the Box: Charging pad Instruction manual  *Sold as an Individual

RAM® Quick-Grip™ 15W Waterproof Wireless Charging Holder with Ball  The RAM® Quick-Grip™ Wireless is a patented, universal water-resistant wireless charging cradle for phones. As part of the spring-loaded RAM® Quick-Grip™ family, this cradle allows for single-handed placement and removal of your phone while taking advantage of Qi-compatible wireless phone charging. Both the top and bottom cups feature rubber to help hold your phone firmly in place. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. This RAM® Quick-Grip™ Wireless kit for vehicles includes a B-size diamond base featuring a 1” rubber ball – perfect for attaching to your choice of B size RAM® double socket arm. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. Features: The waterproof Qi-compatible wireless phone charging cradle features a spring-loaded RAM® Quick-Grip™ design and 15W maximum output RAM® Mounts Compatible™ with B-size double socket arms and ball bases for mounting in your preferred location Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments RAM® Mounts are backed by a lifetime warranty, and RAM® electronics are backed by a 1-year warranty with proof of purchase required Compatible Devices: Apple - iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 8, iPhone 8 Plus, iPhone SE, iPhone, iPhone Xr, iPhone Xs, and iPhone Xs Max Blackberry - Evolve X Blackview - BV9900 & BV9900 Pro Google - Pixel 3, Pixel 3 XL, Pixel 4, Pixel 4 XL, Pixel 5, Pixel 6, Pixel 6 Pro, Pixel 7, and Pixel 7 Pro Huawei - Mate 20 Pro & P30 Pro LG - G6, G6+, G7 ThinQ, G8 ThinQ, G8S ThinQ, V30, V35 ThinQ, V40 ThinQ, and V50 ThinQ Nokia - 8 Sirocco & 9 PureView Razer - Phone 2 Samsung - Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 5, Galaxy Note 8, Galaxy Note 9, Galaxy S10, Galaxy S10 5G, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 Ultra 5G, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S22 Ultra 5G, Galaxy S23, Galaxy S23+, Galaxy S23 Ultra, Galaxy S6, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8, Galaxy S8+, Galaxy S8 Active, Galaxy S9, and Galaxy S9+ Sony - Xperia XZ2, Xperia XZ2 Compact, and Xperia XZ3 Xiaomi - Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE - Axon 10 Pro & Axon 9 Pro Includes: (1) Safety Tether (1) Silicon sleeve for USB waterproof connection (1) 1.2 Meter USB Extension Cable (4) Small zip ties (2) Large zip ties How to Use: To insert your device, use your phone to push the top cup upward and then gently place your device against the cradle for a secure fit This Qi-compatible wireless charging cradle ensures your compatible phone charges as long as it’s within the listed compatible dimensions Specifications: Height Range (inch): 5.625" - 6.625" Max Width (inch): 3.125" Max Depth (inch): .7" Ball Size (inch): B Size (1") Materials: High-strength composite, stainless steel Operating Temperature: 0°C to +37.7°C Power Specifications:  Input Power:5V-2A; 9V-1.67A Output: 15W Conversion Efficiency: 85% Max Maximum Case Thickness: 6mm Working Frequency: 110-205KHZ Product Standard: WPC v.1.2.4 Qi Compatible Compatible with QC2.0/QC3.0 power supplies Weight Capacity: Standard Use: 2 lbs Heavy-Duty Use: 1 lb *FCC, IC, KC, CE, e-Mark, WEEE, RCM, and RoHS Compliant

Quick-Grip™ 15W Waterproof Wireless Charging Mount with Tough-Claw™ The RAM® Quick-Grip™ Wireless is a patented, universal, waterproof wireless charging cradle for phones. As part of the spring-loaded RAM® Quick-Grip™ family, this cradle allows for single-handed placement and removal of your phone while taking advantage of Qi wireless phone charging. Both the top and bottom cups feature rubber to help hold your phone firmly in place. To insert your device, use your phone to push the top cup upward, and then gently place your device against the cradle for a secure fit. This Qi wireless charging cradle ensures your compatible phone charges as long as it’s within the listed compatible dimensions. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. This RAM® Quick-Grip™ Wireless kit includes a B-size diamond base featuring a 1" rubber ball, a short-length double socket arm, and a RAM® Tough-ClawTM clamping base. With the RAM® Tough-Claw™ base, you can easily attach the wireless phone charger to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwired charger. Features: The waterproof Qi-compatible wireless phone charging cradle features a spring-loaded RAM® Quick-Grip™ design and 15W maximum output Kit includes a wireless charging cradle, B-size diamond ball base, short double socket arm, RAM® Tough-Claw™ clamping base, and hardwire charger Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments RAM® Mounts are backed by a lifetime warranty and RAM® electronics are backed by a 1-year warranty with proof of purchase required Specifications: Hardware Included: (1) Safety Tether, (1) Silicon sleeve for USB waterproof connection, (1) Hardwire Charger with Cable, (4) Small zip ties, and (4) Large zip ties Holder Dimensions (inch): Height Range: 5.625" - 6.625", Max Width: 3.125", Max Depth: .7" Clamp Range (inch) .625” – 1.14” diameter Socket-to-Socket Length (inch): 1.75" Ball Size (inch): B Size (1") Weight Capacity: Standard Use: 2 lbs / Heavy-Duty Use: 1 lbs Materials: Marine-grade aluminum and stainless steel Weight: 3.13 lb. Warranty: 1 year Power Specifications: Input Power: 5V-2A; 9V-1.67A Output: 15W Conversion Efficiency: 85% Max Maximum Case Thickness: 6mm Working Frequency: 110-205KHZ Product Standard: WPC v.1.2.4 Qi Compatible: Yes Compatible with QC2.0/QC3.0 power supplies Operating Temperature: 0°C to +37.7°C Compliance: Over Voltage Protection, Short Circuit Protection, Reverse Polarity Protection, RoHS Compliance, WEEE Compliance, SAE J-1113-5 Load Dump (Transient Voltage), and Moisture Resistant Certifications: CE Certification, KC, e-Mark Certification, RCM Certification, FCC Certification Compatible Devices: Apple: iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 8, iPhone 8 Plus, iPhone SE, iPhone X, iPhone Xr, iPhone Xs, and iPhone Xs Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Google: Pixel 3, Pixel 3 XL, Pixel 4, Pixel 4 XL, Pixel 5, Pixel 6, Pixel 6 Pro, Pixel 7, and Pixel 7 Pro Huawei: Mate 20 Pro and P30 Pro LG: G6, G6+, G7 ThinQ, G8 ThinQ, G8S ThinQ, V30, V35 ThinQ, V40 ThinQ, and V50 ThinQ Nokia: 8 Sirocco and 9 PureView Razer: Phone 2 Samsung: Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 5, Galaxy Note 8, Galaxy Note 9, Galaxy S10, Galaxy S10 5G, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 Ultra 5G, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S22 Ultra 5G, Galaxy S23, Galaxy S23+, Galaxy S23 Ultra, Galaxy S6, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8, Galaxy S8+, Galaxy S8 Active, Galaxy S9, and Galaxy S9+ Sony: Xperia XZ2, Xperia XZ2 Compact, and Xperia XZ3  Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE: Axon 9 Pro, Axon 10 Pro

Tough-Charge™ 15W Waterproof Wireless Charging Motorcycle Mount The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal, waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi wireless phone charging. All four arms feature rubber-coated caps that hold a phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle and place your phone inside before releasing the arms. This Qi-compatible wireless charging cradle ensures your compatible phone charges no matter what position it's placed in. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging handlebar kit includes a B-size diamond base featuring a 1" rubber ball, a short double socket arm, and a zinc-coated U-bolt base. U-bolt hardware accommodates rails from .5" to 1.25" in diameter. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwired charger. Features: Waterproof Qi-compatible wireless phone charging cradle features spring-loaded RAM® X-Grip® technology and 15W maximum output Kit for motorcycles includes a wireless cradle, a B-size diamond ball base, a short double socket arm, a U-bolt handlebar base, and a hardwired charger Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments RAM® Mounts are backed by a lifetime warranty and RAM® electronics are backed by a 1-year warranty with proof of purchase required Specifications: Hardware Included: (1) Safety Tether, (1) Glue Tube for Rubber Caps, (1) Cradle Leg, (1) Cradle Leg Cover, (1) Silicon sleeve for USB waterproof connection, (1) Hardwire Charger with cable, (4) Small zip ties, (4) Large zip ties, (1) 1/4"-20 U-Bolt for .5" - 1" Rails, (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails, (2) 1/4"-20 Nylock Nuts, (2) Rubber Caps, and (1) U-Bolt Spacer Holder Dimensions (inch): Width Range: 2.375" - 3.25", Depth Range: .875" max Clamp Range (inch): .5" - 1.25" diameter Socket-to-Socket Length (inch): 1.75" Ball Size (inch): B Size (1") Weight Capacity: Standard Use: 2 lbs / Heavy-Duty Use: 1 lbs Materials: Marine-grade aluminum. high-strength composite, and stainless steel Weight: 1.76 lb. Warranty: 1 year Power Specifications: Input Power: 5V-2A; 9V-1.67A Output: 15W Conversion Efficiency: 85% Max Maximum Case Thickness: 6mm Working Frequency: 110-205KHZ Product Standard: WPC v.1.2.4 Qi Compatible: Yes Compatible with QC2.0/QC3.0 power supplies Input Connector: USB Type-A Male Input Cable Length: 20" with optional 1.2M extension cable Operating Temperature: 0°C to +37.7°C Compliance: Over Voltage Protection, Short Circuit Protection, Reverse Polarity Protection, RoHS Compliance, WEEE Compliance, SAE J-1113-5 Load Dump (Transient Voltage), and Moisture Resistant Certifications: CE Certification, KC, e-Mark Certification, RCM Certification, FCC Certification Compatible Devices: Apple: iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 8, iPhone 8 Plus, iPhone SE, iPhone X, iPhone Xr, iPhone Xs, and iPhone Xs Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Google: Pixel 3, Pixel 3 XL, Pixel 4, Pixel 4 XL, Pixel 5, Pixel 6, Pixel 6 Pro, Pixel 7, and Pixel 7 Pro Huawei: Mate 20 Pro, P30 Pro LG: G6, G6+, G7 ThinQ, G8 ThinQ, G8S ThinQ, V30, V35 ThinQ, V40 ThinQ, and V50 ThinQ Nokia: 8 Sirocco and 9 PureView Razer: Phone 2 Samsung: alaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 5, Galaxy Note 8, Galaxy Note 9, Galaxy S10, Galaxy S10 5G, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 Ultra 5G, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S22 Ultra 5G, Galaxy S23, Galaxy S23+, Galaxy S23 Ultra, Galaxy S6, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8, Galaxy S8+, Galaxy S8 Active, Galaxy S9, and Galaxy S9+ Sony: Xperia XZ2, Xperia XZ2 Compact, and Xperia XZ3 Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE: Axon 9 Pro, Axon 10 Pro

Tough-Charge™ 15W Waterproof Wireless Charging Holder with Charger The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal, waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi-compatible wireless phone charging. All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle and place your phone inside before releasing the arms. This Qi-compatible wireless charging cradle ensures your compatible phone charges no matter what position it’s placed at. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging kit for motorcycles includes a B-size diamond base featuring a 1" rubber ball, perfect for attaching to your choice of B-size RAM® double socket arm. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwired charger. Features: Waterproof Qi-compatible wireless phone charging cradle features spring-loaded RAM® X-Grip® technology and 15W maximum output Kit for motorcycles includes a wireless cradle, a B-size diamond ball base, and a hardwired charger; it attaches to B-size double socket arms Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments RAM® Mounts are backed by a lifetime warranty and RAM® electronics are backed by a 1-year warranty with proof of purchase required Specifications: Hardware Included: (1) Safety Tether, (1) Glue Tube for Rubber Caps, (1) Cradle Leg, (1) Cradle Leg Cover, (1) Silicon sleeve for USB waterproof connection, (1) Hardwire Charger with Cable, (4) Small zip ties, and (4) Large zip ties Holder Dimensions (inch): Width Range: 2.375" - 3.25", Depth Range: .875" max Ball Size (inch): B Size (1") Weight Capacity: Standard Use: 2 lbs / Heavy-Duty Use: 1 lbs Materials: High-strength composite and stainless steel Weight: 1.32 lb. Warranty: 1 year Power Specifications: Input Power: 5V-2A; 9V-1.67A Output: 15W Conversion Efficiency: 85% Max Maximum Case Thickness: 6mm Working Frequency: 110-205KHZ Product Standard: WPC v.1.2.4 Qi Compatible: Yes Compatible with QC2.0/QC3.0 power supplies Operating Temperature: 0°C to +37.7°C Compliance: Over Voltage Protection, Short Circuit Protection, Reverse Polarity Protection, RoHS Compliance, WEEE Compliance, SAE J-1113-5 Load Dump (Transient Voltage), Moisture Resistant Certifications: CE Certification, KC, e-Mark Certification, RCM Certification, FCC Certification Compatible Devices: Apple: iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 8, iPhone 8 Plus, iPhone SE, iPhone X, iPhone Xr, iPhone Xs, and iPhone Xs Max Blackberry: Evolve X Blackview: BV9900 and BV9900 Pro Google: Pixel 3, Pixel 3 XL, Pixel 4, Pixel 4 XL, Pixel 5, Pixel 6, Pixel 6 Pro, Pixel 7, and Pixel 7 Pro Huawei: Mate 20 Pro, P30 Pro LG: G6, G6+, G7 ThinQ, G8 ThinQ, G8S ThinQ, V30, V35 ThinQ, V40 ThinQ, V50 ThinQ Nokia: 8 Sirocco and 9 PureView Razer: Phone 2 Samsung: Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 5, Galaxy Note 8, Galaxy Note 9, Galaxy S10, Galaxy S10 5G, Galaxy S10+, Galaxy S10e, Galaxy S20, Galaxy S20+, Galaxy S20 Ultra 5G, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 5G, Galaxy S22+ 5G, Galaxy S22 Ultra 5G, Galaxy S23, Galaxy S23+, Galaxy S23 Ultra, Galaxy S6, Galaxy S6 Edge, Galaxy S6 Edge+, Galaxy S7, Galaxy S7 Active, Galaxy S7 Edge, Galaxy S8, Galaxy S8+, Galaxy S8 Active, Galaxy S9, Galaxy S9+ Sony: Xperia XZ2, Xperia XZ2 Compact, and Xperia XZ3 Xiaomi: Mi 9, Mi 9 Explorer, Mi Mix 2S, and Mi Mix 3 ZTE: Axon 9 Pro, Axon 10 Pro