Flush Mount Rod Holder - 15 Degree & 9" Depth - Stainless Steel - Cast Gimbal - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features: Safe, rounded bottom 316L Stainless Steel 1/2" pipe-threaded drain hole 9" tube Specifications: Angle: 15-degrees Inner Diameter: 1-5/8"  Outer Diameter: 2"  Cap (L x W): 4-1/2 x 3-5/8 inches

Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 0-degrees Length: 9 in. Inner Diameter: 1-5/8 in.

Flush Mount Rod Holder - 30 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features: 316L stainless steel 1/2 in. threaded drain Specifications: Angle: 30-degrees Length: 9 in. Inner Diameter: 1-5/8 in.

70 Series Standard Flush Mount Rod Holder - 15 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning. Features: 316L stainless steel Fits 2-3/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 15 degrees Bottom Style: Bar Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Gimbal Bar: ¼ in. wide x ½ in. tall

536810C - Flush Mount Rod Holder - 15 Degree - Cast - 10.5" Deep The larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.   A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.  The Rod holder has no logo on the cap for a sleek low profile.  Technical Specifications: Material - 316L Stainless Steel Angle - 15° Bottom Style - Cast Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual

536810S - Flush Mount Rod Holder - 15 Degree - Swivel - 10.5" Deep The larger 80 series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.   A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod holder has no logo on the cap for a sleek low profile.  Technical Specifications: Material - 316L Stainless Steel Angle - 15° Bottom Style - Swivel Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual

70 Series Standard Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.  Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a 1/2 in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 15 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

Stainless Steel Rod Holders With 1/2" Pipe Threaded Drain Hole These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 15° LENGTH: 10-1/2" I.D.: 1-7/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

70 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 15 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.

80 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-9/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 15 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in.

80 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Swivel Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-9/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 15 degrees Bottom Style: Swivel Liner Color: Black Inner Diameter: 1-7/8 in. Outer Diameter: 2-5/8 in. Cap Size: 5-1/8 in. long x 4-1/4 in. wide Tube Length: 10 in.

70 Series Standard Flush Mount Rod Holder - 0 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning. Features: 316L stainless steel Fits 2-3/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 0 degrees Bottom Style: Bar Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Gimbal Bar: ¼ in. wide x ½ in. tall

70 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning. Features: 316L stainless steel Fits 2-3/16 in. hole diameter No logo on the cap for a sleek low profile The liner runs the full length of the tube Specifications: Degrees: 30 degrees Bottom Style: Bar Liner Color: Black Inner Diameter: 1-5/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in. Gimbal Bar: ¼ in. wide x ½ in. tall

Stainless Steel Rod Holders With 1/2" Pipe Threaded Drain Hole These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 30° LENGTH: 10-1/2" I.D.: 1-7/8"

70 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. Features: 316L stainless steel Fits 2-3/16 in. hole diameter Cast models feature a ½ in. drain hole No logo on the cap for a sleek low profile The liner runs the full length of the tube Includes a backing plate and installation nut Installation requires Model # 53679 Installation Socket Specifications: Degrees: 0 degrees Bottom Style: Cast Liner Color: Black Inner Diameter: 1-5/8 in. Outer Diameter: 2-1/8 in. Cap Size: 4-1/2 in. long x 3-5/8 in. wide Tube Length: 9 in.