PM5FM38 Thermal Camera Mount for FLIR M300 Series Vertical 8" Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.63" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.  Extra Security  No visible bolts on the camera mounting plate provides extra security and improved aesthetics.  Small Base Foot Print This mount is the perfect solution for installations where space is limited.

5.5" Thermal Camera Mount for FLIR M300 Series Cameras Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″. Cable Management  A hollow oval mast section provides plenty of room for cable management. Space Saving Design The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round Base Get the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provides extra security and improved aesthetics. Small Base Foot Print This mount is the perfect solution for installations where space is limited.

Mast Mount for FLIR M300 Series Fits Mast with 2-5/8" or Larger Achieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high grade aluminum part prior to our standard 3 part epoxy prime and powder coat to ensure the best possible finish and corrosion resistance. Heavy Duty Six rivets per foot are used to hold the heavy duty mounting feet to the mast. Solid under-body construction not only greatly improves strength but also hides cables.

Camera Mast Mount for FLIR M300 Series Designed in partnership with FlIR ensuring the perfect fit for your camera.  Scanstrut Mast Mounts are the first choice for boat owners the world over. The range has been extended so we now offer an option for installing the latest Thermal cameras onto the yacht's mast. Designed in partnership with FLIR ensuring the perfect fit for your camera. Features: Compact Mounting Marine-grade Aluminium, with unique 4 step marine paint system for long-lasting, premium finish Camera fits safely and snugly close to the mast Universal mast fit Secure install Adjustable mounting feet which fit most mast sizes. The four swivel feet use a 12-point fixing using high quality Monel rivets Includes a Safety Wire Kit that independently attaches camera to mast in case an accident damages the installation

PM5-FMT-8 Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provides extra security and improved aesthetics. Small Base Fotprint This mount is the perfect solution for installations where space is limited.

PM5-FMD-8 Camera Mount for FLIR MD Series and Raymarine T200 Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provides extra security and improved aesthetics. Small Base Foot Print This mount is the perfect solution for installations where space is limited.

ADAF3 Modular Top Plate for FLIR M300 Series Thermal Cameras f/Mounts Ending in M1 or M2 Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.  Unique Design No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics. Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top Plates King Starboard The ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.

Black Modular Plate for FLIR M300 Series Thermal Cameras for Mounts Ending in M1 or M2 Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.

LTBSF3 Light Bar for Thermal Camera FLIR M300 Series for M2 Mounts Only - Must Pick a LTB Top Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance. The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate. Many Styles There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights. 

5.5" Thermal Camera Mount Aft Leaning for M100 & M200 Series Get the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in any installation, especially when saving space is a top priority.  Features: 5.5" Tall, Aft-Leaning Mount compatible with FLIR M100 and M200 Series Thermal Cameras Elevates electronics for optimum performance and allows for flexibility in installation Hollow, oval heavy-duty mast section supports mounted electronics and allows for convenient cable/wiring management Pre-drilled, 7" x 7" base footprint allows for a simple and easy installation Compatible Units: FLIR M132 FLIR M232 Specifications: Orientation: Aft-leaning Material: Marine-grade aluminum Finish: Powder coated white

Camera Plate 3 Fits FLIR M300 Series Thermal Cameras for Dual Mount Systems The modular Dual Power Tower has been designed to allow your open array. radar, satdome and camera to be mounted together in one single space saving modular installation. Specifically for Camera plate 2 (FLIR M300 Thermal Imaging Cameras for Dual Mount Systems)

1.5" Thermal Camera Top Down Riser Mounts Vertical or Upside Down for FLIR MD-Series & Raymarine T-200 Ever wanted to hand your FLIR M-Series or Raymarine T-Series upside down? Well now you can with the Seaview Top Down Riser. Made from Kingstarboard a durable weather resistant marine grade polymer. Unique Design This unique design allows you to mount your FLIR MD Series or Raymarine T200 upside down. High Strength  Made from white ABS glass filled plastic. This helps prevent the plastic from cracking in severe conditions. Ribbing is added for increased strength.

CAM-PT-150-03 Aluminum PowerTower® for FLIR M300 Cameras - 6" Expertly designed to install your camera on the cabin roof, flybridge or radar arch of your powerboat.  Scanstrut thermal camera mounting solutions ensure you get the most from this ground-breaking new technology. Compatible with:  FLIR M300 cameras Features: Designed to fit the most up to date cameras Pre-drilled mounting holes allow the camera to fasten straight to the PowerTower® No need to cut the cameras connectors off for installation  Constructed from Marine grade Aluminium Technical Specifications: Material - Aluminium Height - 5.91" (150mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

CAM-PT-300-03 Aluminum PowerTower® f/FLIR M300 Cameras - 12" Expertly designed to install your camera on the cabin roof, flybridge or radar arch of your powerboat.  Scanstrut thermal camera mounting solutions ensure you get the most from this ground-breaking new technology. Compatible with:  FLIR M300 cameras Features: Designed to fit the most up to date cameras Pre-drilled mounting holes allow the camera to fasten straight to the PowerTower® No need to cut the cameras connectors off for installation  Constructed from Marine grade Aluminium Technical Specifications: Material - Aluminium Height - 11.81" (300mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual