|
UC94 Mounting Hardware
Mounting hardware for UC94 Cylinder
|
22.04 |
|
|
UC128OBF Mounting Hardware
Mounting hardware for UC128TS Cylinder
|
21.59 |
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|
|
X52 Tilt Mechanism w/Mounting Hardware
Tilt range of 48° and five locking positions - suitable on tilt mount helms
X52 tilt mechanism fits Ultraflex tilt mount rotary and rack and pinion steering helms as well as Ultraflex tilt mount hydraulic pumps except SilverSteer™ and MasterDrive™ steering systems
|
171.68 |
|
|
UC128-SVS Mounting Hardware
Mounting hardware for UC128-SVS Cylinder
|
52.90 |
|
|
621 Series 120A Kit with MC-618 Regulator, T-Sensor, K6 Pulley, Single Foot & Mounting Hardware
Kit Includes:
621-120-K6 Alternator
MC-618 Regulator
Temperature Sensors
Mounting Hardware
621-120-K6 Alternator: 120A, 12V, Spindle Mount (Single Foot), 1-2in, K6 Serpentine Pulley, Isolated Ground
1" Motorola-Style Mounting; Typical for Westerbeke, Lehman, Hino & Pathfinder Engines
2" Delco-Style Mounting; Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
982.90 |
|
|
MHX-HS Transom Transducer Hardware
740011-1
Features:
Durable Construction for Lasting Use
Impact Release Mounting Bracket
Lets you repair or replace your existing trolling motor transom mounting bracket
Includes high-speed mounting hardware and product manual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
28.97 |
|
|
MHX MXNT Transom Mount Hardware f/MEGA Transducer
Stainless Steel mounting hardware for the XNT transom mount transducers.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
28.97 |
|
|
RAM Base & Ball w/Garmin Mounting Hardware
RAM-202-G2 universal base consists of a 1.5 inch diameter rubber ball, connected at right angles to a 2.5 inch diameter round base. The base has pre-drilled holes, including the universal AMPS hole pattern. The RAM-202-G2 comes with a custom hardware pack for assembly for your Garmin Fishfinder.
The ""U"" in the part number reflects product packaged in poly bag. For additional specifications, see components and drawings tabs.
Ball Size: 1.5 Inch Rubber Ball
Color: Black Powder Coat
Material: Powder Coated Marine Grade Aluminum
|
16.36 |
|
|
RAM Base & Ball w/Garmin Mounting Hardware
The RAM-B-202-G2U, marine grade aluminum base, consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has a three hole pattern which will connect to the base of the Garmin Marine GPS unit swivel mounts.
This base is designed to connect to the following devices:
Garmin Fishfinder 120
Garmin Fishfinder 140
Garmin Fishfinder 160C
Garmin Fishfinder 250/250C
Garmin Fishfinder 320C
Garmin Fishfinder 340C
Garmin Fishfinder 400C
Garmin Fishfinder 80
Garmin Fishfinder 90
Garmin GPSMAP 172 Marine GPS
Garmin GPSMAP 172C Marine GPS
Garmin GPSMAP 176 GPS
Garmin GPSMAP 176C GPS
Garmin GPSMAP 178C Marine GPS
Garmin GPSMAP 276C GPS
Garmin GPSMAP 292 Marine GPS
Garmin GPSMAP 298 Marine GPS
Garmin GPSMAP 376C GPS
Garmin GPSMAP 378 Marine GPS
Garmin GPSMAP 392 Marine GPS
Garmin GPSMAP 398 Marine GPS
Garmin GPSMAP 420 Marine GPS
Garmin GPSMAP 430 Marine GPS
Garmin GPSMAP 440 Marine GPS
Garmin GPSMAP 450 Marine GPS
Garmin GPSMAP 478 Marine GPS
Garmin GPSMAP 492 Marine GPS
Garmin GPSMAP 498 Marine GPS
Garmin GPSMAP 520 Marine GPS
Garmin GPSMAP 525 Marine GPS
Garmin GPSMAP 530 Marine GPS
Garmin GPSMAP 535 Marine GPS
Garmin GPSMAP 540 Marine GPS
Garmin GPSMAP 545 Marine GPS
Garmin GPSMAP 550 Marine GPS
Garmin GPSMAP 555 Marine GPS
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Hardware included with purchase.
|
11.02 |
|
|
MHX-ICE Ice Flasher Transducer Mounting Hardware
The MHX ICE is a kit that provides the float and stopper for XI 9 19 and XI 9 20 ICE transducers.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.57 |
|
|
GT Transducer Thru-Hull Mounting Hardware
Install your Garmin thru-hull scanning transducer easily with this mounting hardware. Includes an isolation plate, bushings, anti-rotation bolts, washers and nuts.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
40.49 |
|
|
TV1 Dome Top with Labels & Mounting Hardware *Base Not Included
Replacement dome top for KVH TV1 (does not include base).
|
341.36 |
|
|
Bottom Gasket Mounting Hardware for Nightwave
Bottom gasket, mounting screws, fuse & fuse holder, adjustment wrenches. This is a SIONYX official accessory.
|
48.00 |
|
|
Dome Top Only for HD7 with Mounting Hardware
Features:
Top Half Only
Specifically for KVH's HD7 includes mounting hardware
|
1189.27 |
|