Power/Data/Video Cable - 1M Power/Data/Video Cable for the Raymarine e Series and gS Series Models below. Features: Cable: Straight Power/NMEA 0183/Video Compatible Devices: e125 e127 e95 e97 e7D e7 c95 c97 c125 c127 gS95 gS125

1M Power & Analog Video Cable for Nightwave Power and analog video replacement cable for Nightwave. A official SIONYX accessory, this cable is 1 meter (3.3 feet).

5M Power & Analog Video Cable for Nightwave Power and analog video replacement cable for Nightwave. This is a SIONYX official accessory.

3M USB-A Power & Digital Video Cable for Nightwave 3M (10’) USB power and digital video replacement cable for Nightwave. This is a SIONYX official accessory.

3M USB-C Power & Digital Video Cable for Nightwave 3M (10’) USB power and digital video replacement cable for Nightwave. This is a SIONYX official accessory.

10M Power & Analog Video Cable for Nightwave Power and analog video replacement cable for Nightwave. An official SIONYX accessory, this cable is 10 meters (32.8 feet).

Power/Data/Sonar Cable (threaded) Our power/data/sonar cable is threaded with a 19-pin connector. Compatible Devices: GPSMAP® 720 GPSMAP® 720s GPSMAP® 740 GPSMAP® 740s WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Video Cable for Backup Camera Your navigator can show you what's behind your vehicle while backing up with Garmin's 6.5 ft (1.98M) video cable. Plug the 22AWG cable into a third-party video camera using the RCA connector and connect your compatible device using the 3.5 mm connector. Compatible Devices: dēzl® 560LT dēzl® 560LMT dēzl® 760LMT RV 760LMT WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RayNet to RJ45 Male Cable - 1m RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: 1m (3.28ft.) RayNet to SeaTalkhs (RJ45) cable The Raynet (F) to RJ45 Ethernet (M) adapter can be used to connect new a, c, e or gS-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch. When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a RJ45 radar scanner cable, DSM or thermal camera for direct-connection to an HS5 network switch, or MFD RayNet port.

Black Q24D Quantum 2 Doppler Radar with 10M Power & Data Cables Keep inexperienced boaters and hidden dangers at bay, even in the most congested waterways. Quantum™ 2 with Doppler collision avoidance technology makes it easy to discern potentially dangerous targets when navigating in high-traffic areas. Using advanced Doppler processing, Quantum 2 instantly highlights moving radar contacts and color codes to indicate whether they are inbound or outbound.   Features: Black radome enclosure  WiFi and Ethernet  10M power and data cables are included Quantum 2 Doppler Radar, perfect for sailboats, RIBs, and smaller powerboats Available as a standalone scanner with power and data cable  Provides excellent short-range detection and enhanced target detail with an 18’ (6m) minimum range Simplified, fast installation, and the ability to utilize existing Raymarine scanner fixing points Once installed, Quantum 2 starts right up and immediately provides awareness Quantum 2 Black: Stay Aware With Style Offering confident radar navigation and style, Quantum 2 Black adds a level of sophistication to any vessel.  Quantum 2 Black offers the same performance and safety-enhancing Doppler target tracking as the original white Quantum 2 in premium black housing.     Superior Collision Avoidance Raymarine Quantum 2 Doppler target processing identifies and color codes moving radar contacts for instant recognition and reduced risk of collision.  Quantum 2 MARPA mode provides an effective means of dangerous target tracking and is the same technology trusted by the United States Coast Guard. What’s In The Box: 18 in. black radome Power cable 10M (32.8 ft.) Data cable 10M (32.8 ft.) Fixing bolts with spring washers and flat washers (M8) x 4 Documentation General Specifications: Dimensions (Diameter|Height): 541.0 mm|209.5 mm Weight: 5.6 kg Supply Voltage: Either 12 V dc or 24 V dc nominal Minimum: 10.8 V dc | Maximum: 31.2 V dc Operating Voltage Range: Minimum: 10.8 V dc | Maximum: 31.2 V dc Power Consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2 W Waterproofing: IPX6 Operating Temperature Range: -10°C to +55°C Storage Temperature Range: -25°C to +70°C Additional Storage Conditions: Store upright; do not block vents on the underside Humidity: Up to 95% at 35°C Maximum wind speed: 100 kts Transmitter Specifications: Type: X-band solid-state transmitter with pulse compression technology Transmit Frequency: 9354 MHz to 9446 MHz Peak Power Output: 20W Duplexer: Circulator Pulse Widths (3 dB): 40 ns to 14.7 us Chirp Lengths: 400 ns to 22 us Pulse Repetition Frequency: 920 Hz to 5900 Hz Chirp Bandwidth: Up to 32 MHz Standby Mode: Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link – ON Antenna Specifications: Type: Patch Array Beamwidth (nominal): Horizontal: 4.9° | Vertical: 20° Polarization: Horizontal Rotation Speed: 24 rpm nominal Receiver Specifications: IF Frequency: 26 MHz Noise Figure: Less than 4 dB Doppler Specifications: Target Tracking: Tracking of 25 simultaneous MARPA and/or ARPA targets Target Filtering: True Motion Mode identifies only those objects that are moving relative to the vessel Compatibility Specifications: Radar Type: Quantum 2 with Doppler MFD Compatibility: Axiom and Axiom Pro Perfect for: Sailboats, RIBs, and smaller powerboats Type: Solid State CHIRP Pulse Compression with Doppler target tracking Range Performance: 24NM Performance: Lightweight and easy to install. Excellent short and long-range performance. Detect targets as close as 18ft Automatic Bird Mode: No MARPA Target Tracking: Yes Radar Specifications: Transmitter Type: X-band solid-state transmitter with pulse compression technology Target Tracking: Track up to 25 simultaneous Radar targets Standby Mode: Rotation: OFF, Transmission: OFF, Wi-Fi: ON Antenna Type: Patch Array Noise: Less than 4 dB Beamwidth (nominal): Horizontal: 4.9°, Vertical: 20° Polarization: Horizontal Duplexer: Circulator Transmit Frequency: 9354 MHz to 9446 MHz Pulse Repetition Frequency: 920 Hz to 5900 Hz CHIRP Lengths: 400 ns to 22 µs Pulse widths (3 dB)     40 ns to 14.7µs IF Frequency: 26 MHz Rotation Speed: 24 RPM Peak Power Output: 20 W Conformance: Standards: USA: 47CFR FCC Part 2 & Part 80 Certificate of Approval, Canada: RSS138 Iss. 1 Technical Acceptance Certificate, European Union & EFTA: Radio Equipment Directive 2014/53/EU Certificate of Opinion, Australia / New Zealand: ACMA Declaration of Conformity Compliance level 3 Environmental Specifications: Relative Humidity: Up to 95% @ 35°C (95°F) Additional Storage Conditions: Store upright; do not block vents on the underside Waterproof Rating: IPx6 Storage Temperature: -25°C to +70°C (-13°F to 158°F) Maximum Wind Speed: 100 knots Operating Temperature: -10°C to +55°C (14°F to 131°F) Physical Specifications: Dimensions: Height: 209.5 mm (8.25 in), Diameter: 541.0 mm (21.3 in) Weight: 5.6 kg (12.35 lbs)

Black Q24D Quantum 2 Doppler Radar with 15M Power & Data Cables Keep inexperienced boaters and hidden dangers at bay, even in the most congested waterways. Quantum™ 2 with Doppler collision avoidance technology makes it easy to discern potentially dangerous targets when navigating in high-traffic areas. Using advanced Doppler processing, Quantum 2 instantly highlights moving radar contacts and color codes to indicate whether they are inbound or outbound.   Features: Black radome enclosure  WiFi and Ethernet  15M power and data cables are included Quantum 2 Doppler Radar, perfect for sailboats, RIBs, and smaller powerboats Available as a standalone scanner with power and data cable  Provides excellent short-range detection and enhanced target detail with an 18’ (6m) minimum range Simplified, fast installation, and the ability to utilize existing Raymarine scanner fixing points Once installed, Quantum 2 starts right up and immediately provides awareness Quantum 2 Black: Stay Aware With Style Offering confident radar navigation and style, Quantum 2 Black adds a level of sophistication to any vessel.  Quantum 2 Black offers the same performance and safety-enhancing Doppler target tracking as the original white Quantum 2 in premium black housing.     Superior Collision Avoidance Raymarine Quantum 2 Doppler target processing identifies and color codes moving radar contacts for instant recognition and reduced risk of collision.  Quantum 2 MARPA mode provides an effective means of dangerous target tracking and is the same technology trusted by the United States Coast Guard. What’s In The Box: 18 in. black radome Power cable 15M (49.2 ft) Data cable 15M (49.2 ft) Fixing bolts with spring washers and flat washers (M8) x 4 Documentation General Specifications: Dimensions (Diameter|Height): 541.0 mm|209.5 mm Weight: 5.6 kg Supply Voltage: Either 12 V dc or 24 V dc nominal Minimum: 10.8 V dc | Maximum: 31.2 V dc Operating Voltage Range: Minimum: 10.8 V dc | Maximum: 31.2 V dc Power Consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2 W Waterproofing: IPX6 Operating Temperature Range: -10°C to +55°C Storage Temperature Range: -25°C to +70°C Additional Storage Conditions: Store upright; do not block vents on the underside Humidity: Up to 95% at 35°C Maximum wind speed: 100 kts Transmitter Specifications: Type: X-band solid-state transmitter with pulse compression technology Transmit Frequency: 9354 MHz to 9446 MHz Peak Power Output: 20W Duplexer: Circulator Pulse Widths (3 dB): 40 ns to 14.7 us Chirp Lengths: 400 ns to 22 us Pulse Repetition Frequency: 920 Hz to 5900 Hz Chirp Bandwidth: Up to 32 MHz Standby Mode: Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link – ON Antenna Specifications: Type: Patch Array Beamwidth (nominal): Horizontal: 4.9° | Vertical: 20° Polarization: Horizontal Rotation Speed: 24 rpm nominal Receiver Specifications: IF Frequency: 26 MHz Noise Figure: Less than 4 dB Doppler Specifications: Target Tracking: Tracking of 25 simultaneous MARPA and/or ARPA targets Target Filtering: True Motion Mode identifies only those objects that are moving relative to the vessel Compatibility Specifications: Radar Type: Quantum 2 with Doppler MFD Compatibility: Axiom and Axiom Pro Perfect for: Sailboats, RIBs, and smaller powerboats Type: Solid State CHIRP Pulse Compression with Doppler target tracking Range Performance: 24NM Performance: Lightweight and easy to install. Excellent short and long-range performance. Detect targets as close as 18ft Automatic Bird Mode: No MARPA Target Tracking: Yes Radar Specifications: Transmitter Type: X-band solid-state transmitter with pulse compression technology Target Tracking: Track up to 25 simultaneous Radar targets Standby Mode: Rotation: OFF, Transmission: OFF, Wi-Fi: ON Antenna Type: Patch Array Noise: Less than 4 dB Beamwidth (nominal): Horizontal: 4.9°, Vertical: 20° Polarization: Horizontal Duplexer: Circulator Transmit Frequency: 9354 MHz to 9446 MHz Pulse Repetition Frequency: 920 Hz to 5900 Hz CHIRP Lengths: 400 ns to 22 µs Pulse widths (3 dB)     40 ns to 14.7µs IF Frequency: 26 MHz Rotation Speed: 24 RPM Peak Power Output: 20 W Conformance: Standards: USA: 47CFR FCC Part 2 & Part 80 Certificate of Approval, Canada: RSS138 Iss. 1 Technical Acceptance Certificate, European Union & EFTA: Radio Equipment Directive 2014/53/EU Certificate of Opinion, Australia / New Zealand: ACMA Declaration of Conformity Compliance level 3 Environmental Specifications: Relative Humidity: Up to 95% @ 35°C (95°F) Additional Storage Conditions: Store upright; do not block vents on the underside Waterproof Rating: IPx6 Storage Temperature: -25°C to +70°C (-13°F to 158°F) Maximum Wind Speed: 100 knots Operating Temperature: -10°C to +55°C (14°F to 131°F) Physical Specifications: Dimensions: Height: 209.5 mm (8.25 in), Diameter: 541.0 mm (21.3 in) Weight: 5.6 kg (12.35 lbs)

NMEA 2000 Drop Cable - 1M Ancor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop cables are smaller in diameter and more flexible than backbone cables for easy connection to NMEA 2000 devices. The drop cables are available in four lengths from 0.5 meter (1.6 feet) to 5 meters (16.4 feet) to cover a wide variety of applications. Features: Color coded for easy installation and component identification Super flexible 22 AWG power conductors for ease of installation and wire routing NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quantum 2 Q24D Radar Doppler with 10M Power & Data Cables The Raymarine Quantum 2 Radar has Doppler collision avoidance technology. The Quantum 2 next generation CHIRP pulse compression radar by Raymarine provides superior target awareness at both long and extremely short ranges. Using advanced Doppler processing, the system instantly highlights moving radar contacts and color codes them to indicate whether they are inbound or outbound. Quantum with Doppler makes it easy to discern potentially dangerous targets when navigating in high-traffic areas. Easily Identify Dangerous Targets Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision. Safer Navigation Quantum 2’s exclusive Safety Sector feature provides the maximum level of visibility to dangerous targets in the path of your vessel (both mobile and stationary). Superior Collision Avoidance Doppler-enabled MARPA provides an effortless means of dangerous target tracking by eliminating the need to setup guard zones. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard. Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works: Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler Target Processing Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets.Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red Outbound targets are colored green Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels. Quantum 2 Safety Sector Doppler does an excellent job of bringing attention to moving targets, but it does downplay stationary targets, that can be equally as dangerous.Safety Sector provides equal attention to these imminent threats by coloring them as inbound targets. Potential targets include: Buoys Exposed Hazard (rocks, pilings, etc...) Slow moving, low visibility vessels Quantum 2's Safety Sector spreads 15° from the bow to a distance of approximately 200m NOTE: The safety sector is not visible on the display. Quantum 2 automatically processes and highlights targets within this region in red. The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics. Quantum 2 also features Raymarine’s True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely. Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD. The Quantum 2 with Doppler truly sets the standard for on the water safety and collision avoidance.

Quantum 2 Q24D Radar Doppler with 15M Power & Data Cables The Raymarine Quantum 2 Radar has Doppler collision avoidance technology. The Quantum 2 next generation CHIRP pulse compression radar by Raymarine provides superior target awareness at both long and extremely short ranges. Using advanced Doppler processing, the system instantly highlights moving radar contacts and color codes them to indicate whether they are inbound or outbound. Quantum with Doppler makes it easy to discern potentially dangerous targets when navigating in high-traffic areas. Easily Identify Dangerous Targets Raymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision. Safer Navigation Quantum 2’s exclusive Safety Sector feature provides the maximum level of visibility to dangerous targets in the path of your vessel (both mobile and stationary). Superior Collision Avoidance Doppler-enabled MARPA provides an effortless means of dangerous target tracking by eliminating the need to setup guard zones. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard. Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works: Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler Target Processing Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets.Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red Outbound targets are colored green Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels. Quantum 2 Safety Sector Doppler does an excellent job of bringing attention to moving targets, but it does downplay stationary targets, that can be equally as dangerous.Safety Sector provides equal attention to these imminent threats by coloring them as inbound targets. Potential targets include: Buoys Exposed Hazard (rocks, pilings, etc...) Slow moving, low visibility vessels Quantum 2's Safety Sector spreads 15° from the bow to a distance of approximately 200m NOTE: The safety sector is not visible on the display. Quantum 2 automatically processes and highlights targets within this region in red. The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics. Quantum 2 also features Raymarine’s True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely. Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD. The Quantum 2 with Doppler truly sets the standard for on the water safety and collision avoidance.

V10 Series Video Cable - 3 Feet (.91 M) T-Spec composite video cables will send your video signals cleanly across the veritable battlefield of induced distortion and uncertain factory electronics in your car, so you'll get all of the picture with none of the noise.  T-Spec video-specific cables resist noise due to a double-layer woven coaxial construction of the shielding. Recycled copper often contains impurities that can impair a wire's conductivity, so T-Spec uses only oxygen-free non-recycled, virgin copper to maximize signal flow in their patch cables.  Each machined metal RCA plug features a patented 4 way split tip that guarantees the best possible electrical contact.  T-Spec's proprietary PVC jacket gives each cable greater flexibility for easier installation, and the durability required for marine certification. Features: Single channel True 75-ohm video cable Ultra-flexible PVC blended jacket Patented high tolerance compact machined metal end Quad split tip for maximum contact area Marine-grade cable In the Box: One (1) 3' (.91 M) Composite video cable Instruction sheet *Sold as an Individual  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.