StarPod Kit for Starlink Roam/RV Antenna - Housing & Base The StarPod from NavPod is a waterproof housing designed for permanent mounting of the Starlink Roam/RV antenna, typically on a yacht’s hardtop or radar arch. The StarPod housing fits Starlink model UTA-212 (dish face measuring 20.2” x 11.9” / 513 mm x 303 mm). NavPod model SP212-K is the StarPod Kit, which includes the StarPod housing and a black powder-coated aluminum base. The included base is 8.25" tall with a 4" outer diameter and has a 6" circular footprint with four screw mounting holes. Third-Party Accessory Disclaimer: The NavPod and StarPod brands are in no way affiliated with the Starlink or SpaceX brands. The company's products are third-party accessories, distinct from the brands and products they are designed to house. What are the benefits of mounting a Starlink dish in a StarPod? StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Testing has proven that there is no degradation of signal inside the thermoformed acrylic-capped ABS housing. The Starlink Roam dish was originally designed for RVs, not boats. Its waterproof rating of IP54 is a long way from the IP67 rating NavPod is accustomed to in boating from the likes of Garmin, Raymarine, and others. Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other marine electronics for over 25 years. How do I mount a Starlink dish inside a StarPod? The 4-legged "X" base that comes with a Starlink Roam dish is not utilized when mounting inside a StarPod; only the dish and attached mounting pole are used. The center post of the Starlink dish is inserted through the center hole in the bottom of the StarPod and extends into the chosen mounting pedestal. The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup and installation guide for this process). One important thing to note during the setup process is to make sure that the "Snow Melt" setting in the Starlink app is turned to "Off" (this feature produces excess heat to keep snow from piling up on a Starlink dish in winter environments, but is unnecessary and can potentially cause overheating when the dish is mounted inside a housing). Once the initial Starlink setup process is complete, the next step is to get the dish into a horizontal, or "flat" position, perpendicular to the mounting post. To get the dish into this position, unplug the Starlink dish, then plug it back in and turn it on. The dish will begin to move as part of its startup process, so just wait until it’s in a horizontal position and unplug the dish. This may take a couple of attempts, so just repeat as necessary until the dish is powered off in a horizontal or "flat" position. At this point, the dish can now be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod). How can the Starlink dish move if it’s inside a StarPod? It can’t, but that’s okay. When powered on inside the StarPod housing, the Starlink dish will initially move as it looks for a signal. However, when the dish bumps into the inside of the housing and is unable to move any further, it will simply register an obstruction and discontinue its movement (a feature built into the dish to prevent the motor from burning out when it’s positioned next to a tree branch, ceiling, or other obstruction). The StarLink app may notify you of the obstruction, but the dish will continue to operate normally otherwise. There are several methods you can find on the internet for disabling your Starlink motor to achieve a fixed position. While these methods can be effective, it’s important to note that any modification of your Starlink antenna (drilling or cutting into the case, disconnecting internal cables, or any disassembly at all) will void the product warranty. If the Starlink dish can’t move, how can it get a good signal? Short Answer: A Starlink dish installed on a boat in a fixed horizontal position will achieve the same signal quality as a dish that’s free to move and adjust position. Long Answer: The Starlink Roam dish utilizes phased array technology. Rather than searching for a single satellite to point to (like older 18" and 24" satellite TV antennas), the Starlink dish is continuously switching between different satellites every few minutes (satellites that are moving at very high speeds and orbiting much lower than traditional TV and internet satellites). When a Starlink dish moves, it isn’t trying to point toward a particular satellite; it’s just looking for a clear view of the sky. Since this dish was originally designed for RV use, the movement of the dish was designed to allow it to point away from overhead obstructions like trees and buildings that might prevent a clear view of the sky. While this functionality makes sense for RV use, it is much less functional for boating use, where the dish would almost never encounter any overhead obstructions. When testing, a Starlink dish mounted and immobilized inside a StarPod achieved the same signal quality and internet speed as a dish that was free to move outside of a housing. Neither the fixed horizontal positioning nor the housing material itself resulted in any signal degradation as long as the dish had an otherwise clear view of the sky (as it typically would on a floating vessel). Liability Disclaimer: NavPod assumes no liability for any violation of Starlink product warranty or terms of service that may result from modifying a Starlink dish or mounting it inside a StarPod. General Information: StarPod is manufactured by Ocean Equipment in Bend, Oregon, USA, using the same time-proven materials that are used to fabricate the popular line of NavPods, waterproof housings for marine electronics. All NavPods Feature: Structural Rigidity – The Gen3 enhancements now include a thicker gauge of acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system, providing an excellent watertight seal. This seal provides the best protection for your marine electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – The company uses all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets to match the NavPod wrench for better holding ability when tightening. The nickel-chrome-plated stainless steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – Navpod stands behind its commitment by offering a 10-year warranty on all new NavPods, including the StarPod.

StarPod Housing Only for Starlink Roam/RV Antenna - Base Not Included The StarPod from NavPod is a waterproof housing designed for permanent mounting of the Starlink Roam/RV antenna, typically on a yacht’s hardtop or radar arch. The StarPod housing fits Starlink model UTA-212 (dish face measuring 20.2” x 11.9” / 513 mm x 303 mm). NavPod model SP212-H includes the StarPod housing only and is intended for installations where the housing will be mounted on an existing or third-party pedestal. A compatible pedestal should have an upper mounting surface no larger than a 7.5” diameter circle, which is the available mounting surface on the bottom of a StarPod housing. Third-Party Accessory Disclaimer: The NavPod and StarPod brands are in no way affiliated with the Starlink or SpaceX brands. The company's products are third-party accessories, distinct from the brands and products they are designed to house. What are the benefits of mounting a Starlink dish in a StarPod? StarPod protects Starlink and completely encloses the Starlink antenna in a very sturdy and attractive waterproof housing. Testing has proven that there is no degradation of signal inside the thermoformed acrylic-capped ABS housing. The Starlink Roam dish was originally designed for RVs, not boats. Its waterproof rating of IP54 is a long way from the IP67 rating NavPod is accustomed to in boating from the likes of Garmin, Raymarine, and others. Mounting a Starlink dish inside a StarPod provides additional protection from water intrusion, just as all NavPods have done for other marine electronics for over 25 years. How do I mount a Starlink dish inside a StarPod? The 4-legged "X" base that comes with a Starlink Roam dish is not utilized when mounting inside a StarPod; only the dish and attached mounting pole are used. The center post of the Starlink dish is inserted through the center hole in the bottom of the StarPod and extends into the chosen mounting pedestal. The initial Starlink setup process should be completed before mounting the dish inside a StarPod (refer to your Starlink setup and installation guide for this process). One important thing to note during the setup process is to make sure that the "Snow Melt" setting in the Starlink app is turned to "Off" (this feature produces excess heat to keep snow from piling up on a Starlink dish in winter environments, but is unnecessary and can potentially cause overheating when the dish is mounted inside a housing). Once the initial Starlink setup process is complete, the next step is to get the dish into a horizontal, or "flat" position, perpendicular to the mounting post. To get the dish into this position, unplug the Starlink dish, then plug it back in and turn it on. The dish will begin to move as part of its startup process, so just wait until it’s in a horizontal position and unplug the dish. This may take a couple of attempts, so just repeat as necessary until the dish is powered off in a horizontal or "flat" position. At this point, the dish can now be mounted inside the StarPod housing (using the instructions and hardware included with the StarPod). How can the Starlink dish move if it’s inside a StarPod? It can’t, but that’s okay. When powered on inside the StarPod housing, the Starlink dish will initially move as it looks for a signal. However, when the dish bumps into the inside of the housing and is unable to move any further, it will simply register an obstruction and discontinue its movement (a feature built into the dish to prevent the motor from burning out when it’s positioned next to a tree branch, ceiling, or other obstruction). The StarLink app may notify you of the obstruction, but the dish will continue to operate normally otherwise. There are several methods you can find on the internet for disabling your Starlink motor to achieve a fixed position. While these methods can be effective, it’s important to note that any modification of your Starlink antenna (drilling or cutting into the case, disconnecting internal cables, or any disassembly at all) will void the product warranty. If the Starlink dish can’t move, how can it get a good signal? Short Answer: A Starlink dish installed on a boat in a fixed horizontal position will achieve the same signal quality as a dish that’s free to move and adjust position. Long Answer: The Starlink Roam dish utilizes phased array technology. Rather than searching for a single satellite to point to (like older 18" and 24" satellite TV antennas), the Starlink dish is continuously switching between different satellites every few minutes (satellites that are moving at very high speeds and orbiting much lower than traditional TV and internet satellites). When a Starlink dish moves, it isn’t trying to point toward a particular satellite; it’s just looking for a clear view of the sky. Since this dish was originally designed for RV use, the movement of the dish was designed to allow it to point away from overhead obstructions like trees and buildings that might prevent a clear view of the sky. While this functionality makes sense for RV use, it is much less functional for boating use, where the dish would almost never encounter any overhead obstructions. When testing, a Starlink dish mounted and immobilized inside a StarPod achieved the same signal quality and internet speed as a dish that was free to move outside of a housing. Neither the fixed horizontal positioning nor the housing material itself resulted in any signal degradation as long as the dish had an otherwise clear view of the sky (as it typically would on a floating vessel). Liability Disclaimer: NavPod assumes no liability for any violation of Starlink product warranty or terms of service that may result from modifying a Starlink dish or mounting it inside a StarPod. General Information: StarPod is manufactured by Ocean Equipment in Bend, Oregon, USA, using the same time-proven materials that are used to fabricate the popular line of NavPods, waterproof housings for marine electronics. All NavPods Feature: Structural Rigidity – The Gen3 enhancements now include a thicker gauge of acrylic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening, and the more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All NavPods are manufactured with a double gasket system, providing an excellent watertight seal. This seal provides the best protection for your marine electronics. StarPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The gasket will continue to do its job. Nickel Chrome-Plated Stainless Steel – The company uses all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets to match the NavPod wrench for better holding ability when tightening. The nickel-chrome-plated stainless steel tamper-resistant screws provide security combined with a little style! Commitment to Quality – Navpod stands behind its commitment by offering a 10-year warranty on all new NavPods, including the StarPod.

4078-20-ER 20' Extension Cable Kit for VHF, AIS, CB Antenna with RG-8x & Easy Route FME Mini-End The cable that connects your antenna to your radio can make or break signal quality literally. Shakespeare offers a range of coaxial cables tailored to the needs of marine communications, and to withstand the rigors of the boating environment. Features: 20' Length White

Ampco Pumps AC328MD21T-S Peo 3 X 2 Kit

Ampco Pumps AC328MD25T-S Peo 3 X 2 Kit

6" Aluminum PowerTower Mount for Starlink Engineered for Starlink Flat High-Performance  150mm (6”) high and constructed from the best marine-grade aluminum, designed to fit Starlink's Flat High-Performance Model. Install your Starlink with precision on the roof, T-top, flybridge, or radar arch of your powerboat. It guarantees obstacle clearance and positions your Starlink at an ideal 8° angle for optimal connectivity. Designed for the harsh marine environment, it's tailored to fit Starlink High-Performance. Pre-drilled mounting holes allow secure fastening directly to the tower, while the built-in Scanstrut Cable Seal ensures a watertight installation, eliminating the need to remove Starlink connectors during installation. The paint finishes adhere to our exclusive 4-step marine paint system, and it's crafted from premium marine-grade aluminum. Features: Designed to fit, designed to fit Starlink High-Performance. Pre-drilled mounting holes allow Starlink to fasten straight to the PowerTower No need to cut the cable connectors off for installation  Marine sealant is not required Paint finishes comply with our unique 4-step marine paint system A range of accessories light bars can be bolted to the back of the PowerTower

SXV300 Connect Tuner & Marine/RV Antenna Connect, control and enjoy all the wonders of satellite radio on the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts. Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately). Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement. Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs. Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C  IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

SXV300 Connect Tuner & Marine/RV Antenna *3-Pack Connect, control, and enjoy all the wonders of satellite radio in the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts. Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately). Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement. Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs. Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C  IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

SXV300 Connect Tuner & Marine/RV Antenna *6-Pack Connect, control, and enjoy all the wonders of satellite radio in the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately) Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C  IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

S-WB675 Marine Hideaway Stereo with SiriusXM SXV300 Connect Tuner & Marine/RV Antenna This kit combines Fusion Apollo MS-WB675 Marine Hideaway Stereo with SiriusXM’s SXV300 Connect Tuner and Marine/RV Antenna Fusion Apollo MS-WB675 Marine Hideaway Stereo The Apollo WB675 marine hideaway stereo is compact in design but still offers superior audio quality in up to four separate audio zones that you can control. Custom audio profiles for each zone on your boat deliver superior-quality audio and audio streaming with Wi-Fi® technology, providing high-quality audio with a faster data transfer rate. With the Apollo WB675, experience seamless high-quality audio streaming from your music app via the AirPlay® 2 software feature. The freedom of musical choice has never been easier with PartyBus™ network technology and Multi-Zone™ Technology. Features:  Control your music from your compatible multifunction display (MFD), smart device, or Garmin smartwatch The Apollo WB675 stereo has been tested to a high level of protection against salt fog, temperature, vibration, and UV Updates are now available from your compatible smartphone or device via the free Fusion-Link app, the Apollo Series is intelligently simple and easy to keep up-to-date Grouping allows you to link up multiple Apollo Series stereos connected to the same network and play the same audio source synchronized across all stereos Compact Design  Designed to save space at the helm, Apollo WB675 can be hidden away in the dash or mounted in a variety of areas such as storage lockers, inside helm consoles, and other concealed compartments. Fusion Digital Signal Processing (DSP)  A technically superior listening experience made simple, Fusion DSP optimizes the audio signal delivered to your Fusion system to produce superior sound quality at all volume levels, in every listening environment. Easy-To-Install DSP Profiles  With just a few clicks on your compatible smartphone, setting up your DSP profiles is made simple with the free Fusion-Link™ app. You can set up the preconfigured DSP profiles once and enjoy listening to high-quality audio customized for your ears and the environment. Gain Wi-Fi Capabilities  Connect your Apollo WB675 stereo via Ethernet to your wireless network router, Garmin MFD, or Apollo Series stereo network, and enjoy Wi-Fi audio streaming and over-the-air software updates. Audio Streaming with Wi-Fi  Enjoy the clarity and premium quality of audio streaming with Wi-Fi technology, including the convenience of AirPlay 2 from Apple® and universal plug-and-play (UPnP). Volume Control  Scroll through available zones on your boat, and enjoy independent volume control, or select ALL volumes to adjust a group of stereos at once. Power Options  Power options allow you to turn on any connected Apollo Series stereo in standby mode on the PartyBus Network remotely from another Apollo Series stereo. Home Zone  Home Zone is the physical zone on board your boat in which the stereo is installed. After adjusting audio in another area, the stereo defaults to control of the Home Zone after a period of inactivity. Freedom of Choice to Listen to What You Want  Take advantage of the many source options available, including the AirPlay 2 feature1, BLUETOOTH® technology, UPnP1, optical audio, advanced SiriusXM® features, DAB+ radio, AM/FM radio, AUX, and USB connections. Advanced SiriusXM Features Available  Along with the addition of on-screen album art, a selection of advanced features is now available on SiriusXM. Full Control from Your Apollo ERX400 Remote  Control the Apollo WB675 stereo by connecting your Apollo ERX400 wired remote via Ethernet and enjoy the full Apollo user experience including PartyBus-Network functionalities. Control from A Compatible MFD  Are you looking for a more streamlined system? You can connect Apollo WB675 to your compatible MFD using an Ethernet or NMEA 2000® network connection without the need for an additional wired remote. Control More Audio Zones  Control up to eight independent audio zones by connecting your second Apollo WB675 stereo via Ethernet to a router or Ethernet switch (additional stereo sold separately). You’ll be able to control both Apollo WB675 stereos from your Apollo ERX400 wired remote. Connectivity: Auxiliary input: 1 Optical audio input: 1 digital SPDIF port Ethernet: 1 NMEA 2000: 1 USB 2.0: 1 SiriusXM satellite radio: 1 (requires SiriusXM Connect vehicle tuner; does not support traffic and weather) AM/FM radio: 1 Motorola antenna connector port Speaker: 4 speaker connections (2 zones amplified) RCA pre-out (left, right, and subwoofer): 4 zones (requires external amplification) Line out: 4 (1 x L + R per zone; requires external amplification) Subwoofer out: 1 mono output (requires external amplification) General Stereo Features: Physical dimensions (HxWxD): (inch) 5.1" x 5.1" x 2.2" / (mm) 130 x 130 x 56 Weight: 16.75 oz (475 g) Power input: 10.8-16 VDC Operating Temperature Range: 32-122 degrees F (0-50 degrees C) Current (max): 15 A NMEA 2000® network LEN: 1 (50 mA) BLUETOOTH® technology wireless range: Up to 30' (10 m) ANT® connectivity wireless range: Up to 10' (3 m) Wireless Frequencies/Protocols: BLUETOOTH 2.4 GHz @ +12 dBm nominal; ANT 2.4 GHz @ +7 dBm nominal Compass-safe Distance: (inch) 5.9" (mm) 150 mm Built-in Amplifier: Class-D (2-ohm stereo-stable) Peak Power: 280 watts Built-in Amplifier: Class-D (2-ohm stereo-stable) Rated Power Output (2 ohm): 43 watts RMS x 4 @ 14.4 V input < 10% THD Rated Power Output (4 ohm): 26 watts RMS x 4 @ 14.4 V input < 10% THD Built-in Digital Signal Processing: Yes (with preconfigured DSP profiles) DAB+ Ready: Yes (requires DAB100A antenna module) NRX Remote Compatibility: Yes What's In The Box? Fusion MS-WB675 marine hideaway stereo Four 8-gauge, self-tapping screws Power and speaker wiring harness Auxiliary-in, line-out, and subwoofer-out wiring harness Line-out and subwoofer-out wiring harness 6 ft (2 meters) NMEA 2000® drop cable Documentation *Available when connected to a wireless network router, Garmin MFD, or Apollo Series stereo network enabled with Wi-Fi technology SiriusXM SXV300 Connect Tuner & Marine/RV Antenna Control and enjoy all the wonders of satellite radio in the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately) Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C  IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

Apollo MS-RA770 Touchscreen AM/FM/BT/SiriusXM Stereo with SiriusXM SXV300 Connect Tuner & Marine/RV Antenna This kit combines Fusion’s MS-RA770 stereo with SiriusXM’s SXV300 Connect Tuner and Marine/RV Antenna Fusion Apollo MS-RA770 Touchscreen AM/FM/BT/SiriusXM Stereo - 4 Zone with DSP The world’s first touchscreen marine stereo with Apple AirPlay 2 and built-in Wi-Fi, the Apollo RA770 has redefined audio excellence with revolutionary technology and innovative design including Fusion’s Digital Signal Processing, enhanced PartyBus-Network capabilities, over-the-air software updates, a one-piece glass display and more source options than ever before, including advanced SiriusXM features.  From the kick drum to the eardrum, Apollo has made it inherently simple to customize your audio entertainment for superior sound quality in any area of your boat.   Built on the True-Marine design philosophy from Fusion®, the Apollo RA770 stereo has an IPX6- and IPX7-rated water-resistant front panel and has been tested to a high level of protection against salt fog, temperature, vibration, and UV. Digital Signal Processing (DSP)   A technically superior listening experience made simple, Fusion's DSP produces superior sound quality in every environment.  Precisely calculated loudness curves optimized for the human ear ensure quality, full-range audio at every volume level, while the feed-forward limiter anticipates a peak in the audio and adjusts the gain to make distortion, a thing of the past.  Using environmental information and acoustically designed Fusion speaker profiles, you can now achieve customized, optimized audio for any area of your boat, resulting in an entertainment system that is perfectly tuned for premium audio reproduction, and programmed to protect your system season after season. PartyBus™ Network   Enjoy the freedom of musical choice with the Apollo Series and Fusion's PartyBus-Network. We have introduced a new intuitive user experience allowing for easy navigation of your entire boat's audio network, taking control of your audio and sources a seamless experience.  Key functionalities include - Stereo grouping, volume control, power options, and home zone technology. NMEA 2000  Ready for connection and control from any supported Multi-Function Display - The MS-RA770 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-RA770 with a supported chartplotter or fishfinder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the MS-RA770 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones. Fusion-Link™   Makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports, or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld, or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat.  The Apollo Series is intelligently simple and always up to date, thanks to the over-the-air software updates available from your smartphone or compatible device via the free Fusion-Link app. Multi-Zone Control  With four independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone. Over-The-Air Software Updates  Over-the-air software updates are available from your smartphone or compatible device via the free Fusion-Link app. Features: Touchscreen technology Marine digital media receiver with built-in Wi-Fi and Bluetooth 4.3" capacitive touch glass LCD color display Advanced Fusion DSP optimizes sound quality at all listening levels Multi-zone control lets you tune four audio zones Works with iPod/iPhone, plus Android and Windows phones Class D amplifier technology conserves battery power PartyBus audio distribution technology (requires Fusion MS-SRX400 zone stereos) Technical Specifications: 4 Zones 280 Watts peak power One ethernet port NMEA 2000 compatible  Bluetooth wireless range - 30' ANT wireless range - 10' Class D Amplifier Rear USB connection DAB+ Ready Language Interface -Bulgarian / Chinese (Simplified) / Chinese (Traditional) / Croatian / Czech / Danish / Dutch / English / Finnish / French / German / Greek / Italian / Japanese / Korean / Norwegian / Polish / Portuguese (BR) / Portuguese (PT) / Slovenian / Spanish / Swedish / Thai / Turkish  Dimensions (H/W/D) - 3.23" x 7.56" x 4.7"  Cutout Dimensions (H/W/D) - 2.08" x 6.53" x 4.15" In the Box: Stereo Head Unit Cover 6' NMEA 2000 Drop Cable Mounting Hardware Mounting Template Power Wiring Harness Aux/Line-out Harness Documentation SiriusXM SXV300 Connect Tuner & Marine/RV Antenna Control and enjoy all the wonders of satellite radio on the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately) Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C  IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

Apollo MS-SRX400 Stereo with SiriusXM SXV300 Connect Tuner & Marine/RV Antenna This kit combines Fusion’s MS-SRX400 Stereo with SiriusXM’s SXV300 Connect Tuner and Marine/RV Antenna Fusion Apollo MS-SRX400 Stereo with AM/FM/BT - Single Zone w/DSP If you want to build a cutting-edge multi-zone audio system on your boat, Fusion's Apollo Series has everything you need. Start with a Fusion MS-RA770 or MS-RA670 touchscreen marine receiver, then add one or more of these MS-SRX400 zone receivers in other zones on your boat. You can sync up all the music on the boat with Fusion's PartyBus™ feature, or use each MS-SRX400 as an individual entertainment source.  You can use its built-in amp to power stereo speakers in your zone, or use the preamp outputs to add amps to power the speakers and a subwoofer. Digital Signal Processing (DSP)  A technically superior listening experience made simple, Fusion's DSP produces superior sound quality in every environment. Precisely calculated loudness curves optimized for the human ear ensure quality, and a full range of audio at every volume level, while the feed-forward limiter anticipates a peak in the audio and adjusts the gain to make distortion, a thing of the past. Using environmental information and acoustically designed Fusion speaker profiles, you can now achieve customized, optimized audio for any area of your boat, resulting in an entertainment system that is perfectly tuned for premium audio reproduction, and programmed to protect your system season after season. PartyBus™ Network  Enjoy the freedom of musical choice with the Apollo Series and Fusion's PartyBus-Network. We have introduced a new intuitive user experience allowing for easy navigation of your entire boat's audio network, making control of your audio and sources a seamless experience.  Key functionalities include - Stereo grouping, volume control, power options, and home zone technology. Wi-Fi Audio Streaming  In the marine industry, high-quality on-board audio streaming is now available via Wi-Fi with the Apollo Series.  Wi-Fi streaming provides a higher data transfer rate in comparison with Bluetooth, for higher-quality audio reproduction.  Enjoy perfectly synced music throughout your vessel by wirelessly connecting multiple stereos via a PartyBus-Network. Fusion-Link™  Makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports, or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld, or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat.   Over-The-Air Software Updates  Over-the-air software updates are available from your smartphone or compatible device via the free Fusion-Link app. Features: Marine digital media receiver with built-in Wi-Fi and Bluetooth 2.7" LCD color display Advanced Fusion DSP optimizes sound quality at all listening levels Works with iPod/iPhone, plus Android and Windows phones Class D amplifier technology conserves battery power PartyBus audio distribution technology Technical Specifications: 1 Zone 140 Watts peak power Class D Amplifier Language Interface - English, French, German, Spanish, Dutch, Italian  Dimensions (L/H/D) -  4-5/16" x 2-3/4" x 7/8"  Cutout Dimensions (H/D) - 2" x 3.9" In the Box: Stereo Head Unit Mounting Hardware Mounting Template Power Wiring Harness Aux/Line-out Harness Documentation *SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK SiriusXM SXV300 Connect Tuner & Marine/RV Antenna Control and enjoy all the wonders of satellite radio on the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts. Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately). Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement. Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs. Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C  IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

Apollo MS-RA670 Stereo with SiriusXM SXV300 Connect Tuner & Marine/RV Antenna This kit combines Fusion’s Apollo MS-RA670 Stereo with SiriusXM’s SXV300 Connect Tuner and Marine/RV Antenna Fusion Apollo MS-RA670 Stereo with AM/FM/BT/SiriusXM - 3 Zone with DSP The Apollo RA670 inherits key audio innovations and revolutionary technology from the award-winning Apollo RA770 including Fusion's Digital Signal Processing, enhanced PartyBus-Network capabilities, Wi-Fi audio streaming with Apple AirPlay® 2, over-the-air software updates, and more source options including Optical Audio for connection to TVs in salons and cabins.  From the kick drum to the eardrum, Apollo has made it inherently simple to customize your audio entertainment for superior sound quality in any area of your boat.  The future of marine audio entertainment has arrived. Digital Signal Processing (DSP)  A technically superior listening experience made simple, Fusion's DSP produces superior sound quality in every environment.  Precisely calculated loudness curves optimized for the human ear ensure quality, full range audio at every volume level, while the feed-forward limiter anticipates a peak in the audio and adjusts the gain to make distortion, a thing of the past.  Using environmental information and acoustically designed Fusion speaker profiles, you can now achieve customized, optimized audio for any area of your boat, resulting in an entertainment system that is perfectly tuned for premium audio reproduction, and programmed to protect your system season after season. PartyBus™ Network   Enjoy the freedom of musical choice with the Apollo Series and Fusion's PartyBus-Network. We have introduced a new intuitive user experience allowing for easy navigation of your entire boat's audio network, taking control of your audio and sources a seamless experience.  Key functionalities include - Stereo grouping, volume control, power options, and home zone technology. NMEA 2000  Ready for connection and control from any supported Multi-Function Display - The MS-RA670 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-RA670 with a supported chartplotter or fishfinder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the MS-RA670 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones. Fusion-Link™  Makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports, or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld, or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat.  The Apollo Series is intelligently simple and always up to date, thanks to the over-the-air software updates available from your smartphone or compatible device via the free Fusion-Link app. Multi-Zone Control  With three independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone. Over-The-Air Software Updates  Over-the-air software updates are available from your smartphone or compatible device via the free Fusion-Link app. Features: Marine digital media receiver with built-in Wi-Fi and Bluetooth 2.7" LCD color display Advanced Fusion DSP optimizes sound quality at all listening levels Multi-zone control lets you tune three audio zones Works with iPod/iPhone, plus Android and Windows phones Class D amplifier technology conserves battery power PartyBus audio distribution technology (requires Fusion MS-SRX400 zone stereos) Technical Specifications: 3 Zones 280 Watts peak power One ethernet port NMEA 2000 compatible  Class D Amplifier Rear USB connection Bluetooth wireless range - 30' ANT wireless range - 10' Language Interface - Bulgarian / Chinese (Simplified) / Chinese (Traditional) / Croatian / Czech / Danish / Dutch / English / Finnish / French / German / Greek / Italian / Japanese / Korean / Norwegian / Polish / Portuguese (BR) / Portuguese (PT) / Slovenian / Spanish / Swedish / Thai / Turkish  Dimensions (W/H/D) - 6-3/16" x 2-11/16" x 4-7/8"  Cutout Dimensions (W/H/D) - 5-5/16" x 2-1/16" x 4-1/8" In the Box: Stereo Head Unit Cover 6' NMEA 2000 Drop Cable Mounting Hardware Mounting Template Power Wiring Harness Aux/Line-out Harness Documentation *SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK SiriusXM SXV300 Connect Tuner & Marine/RV Antenna Control and enjoy all the wonders of satellite radio on the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately) Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

MS-RA210 2-Zone USB Stereo with SiriusXM SXV300 Connect Tuner & Marine/RV Antenna This kit combines Fusion’s MS-RA210 Stereo with SiriusXM’s SXV300 Connect Tuner and Marine/RV Antenna Fusion MS-RA210 Stereo with AM/FM/BT/SiriusXM - 2 Zones with DSP  The MS-RA210 is a compact marine stereo designed to deliver a quality audio entertainment experience out on the water. The MS-RA210 features Fusion's new-look design aesthetics and revolutionary Digital Signal Processing technology for optimized listening in any environment.  The sleek design with the option of either mounting the stereo with a conventional flush finish or integrating it flat ensures a visually appealing finish to your dash, making the MS-RA210 a stylish addition to your vessel. Digital Signal Processing (DSP)  A technically superior listening experience made simple, Fusion's DSP produces superior sound quality in every environment.  Precisely calculated loudness curves optimized for the human ear ensure quality, full range audio at every volume level, while the feed-forward limiter anticipates a peak in the audio and adjusts the gain to make distortion, a thing of the past.  Using environmental information and acoustically designed Fusion speaker profiles, you can now achieve customized, optimized audio for any area of your boat, resulting in an entertainment system that is perfectly tuned for premium audio reproduction, and programmed to protect your system season after season. NMEA 2000  Ready for connection and control from any supported Multi-Function Display - The MS-RA210 is a Fusion-Link Wired NMEA 2000 certified product and is compatible with a range of the world’s leading Multi-Function Displays for on-screen audio control. When pairing the MS-RA210 with a supported chartplotter or fishfinder, you bring your music to the big screen, allowing you to keep an eye on the charts or the fish while skipping tracks or adjusting the volume at the same time. In addition to MFD control, the MS-RA210 will connect to any Fusion NRX series remote control attached to the same powered NMEA 2000 network for localized control of the audio zones Fusion-Link™  Makes control of your stereo easier than ever.  Quickly find your favorite song, tune in to the sports, or turn up the volume all from your partnered multifunction display (MFD), compatible smartphone, Garmin Handheld, or Garmin watch.  With the app installed, you can enjoy source navigation and track selection from wherever you are on your boat.   Multi-Zone Control  With two independent audio zones available, each with advanced localized menu controls, including zone naming, you can easily customize and control your listening experience in each zone. Over-The-Air Software Updates  Over-the-air software updates are available from your smartphone or compatible device via the free Fusion-Link app. Features: 2.7" LCD color display Advanced Fusion DSP optimizes sound quality at all listening levels Multi-zone control lets you tune two audio zones Works with iPod/iPhone, plus Android and Windows phones Class D amplifier technology conserves battery power Technical Specifications: 2 Zones 200 Watts peak power NMEA 2000 compatible  Class D Amplifier Rear USB connection Bluetooth wireless range - 30' ANT wireless range - 10' DAB+ Ready Language Interface - Bulgarian / Chinese (Simplified) / Chinese (Traditional) / Croatian / Czech / Danish / Dutch / English / Finnish / French / German / Greek / Italian / Japanese / Korean / Norwegian / Polish / Portuguese (BR) / Portuguese (PT) / Slovenian / Spanish / Swedish / Thai / Turkish  Dimensions (W/H/D) - 6-3/16" x 2-11/16" x 5"  Cutout Dimensions (W/H/D) - 5-5/16" x 2-1/16" x 4-1/4" In the Box: Stereo Head Unit Mounting Hardware Mounting Template 6' NMEA 2000 Drop Cable Power Wiring Harness Aux/Line-out Harness Documentation *SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK SiriusXM SXV300 Connect Tuner & Marine/RV Antenna Control and enjoy all the wonders of satellite radio in the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look. Features: Flexible Installation: Surface, Low Profile with Base, and Pedestal Mounts Compatible with third-party 1"-14 threaded masts, and rail mounts (sold separately) Antenna with 6" pigtail and 25' antenna cable to allow for optimal placement Best antenna solution for both metallic and non-metallic mounting applications, such as boats or RVs Technical Specifications: Dimensions - 3.42" (W) x 2" (H) x 0.7" (D) Power Requirements - 12v DC, 0.3 A (MAX) supplied by boat or RV Operating Temperature - -4°F to +158°F /-20°C to +70°C  IPX67 rated In the Box: SXV300 Connect Tuner Marine/RV Antenna 25' Antenna Cable Three Mounting Accessories: Surface, Low Profile with Base, and Pedestal Mounts NOTE: The SXV300 Connect Tuner is not marinized. It should be mounted in a clean, dry location.

Antenna Deck Base for CX4A Antenna Designed to mount on horizontal deck and supplied with fixing bolts and gasket.