|
Sta-Rite HMSE-1FL Multi-Stage Jet-Centrifugal Pump 1HP
Sta-Rite- Multi-Stage Jet-Centrifugal Pump, Convertible, Cast Iron Construction, 1HP 115/230V Motor, 1-1/4" Suction Port, 1" Drive and Discharge Ports, 30/50PSI Pressure Switch, For Shallow or Deep Wells
|
1923.12 |
|
|
Sta-Rite MSE-7 Vertical Multi-Stage Jet Pump 1HP
Sta-Rite- Vertical Multi-Stage Jet Pump, Convertible, Cast Iron Construction, 1HP 115/230V Motor, 1-1/4" Suction and Drive Ports, 1" Discharge Port, 40/60psi Pressure Switch, For Shallow or Deep Wells
|
1532.88 |
|
|
Simer 3963 Submersible Sewage Pump, Pitmaster, 1/2HP
Simer Submersible Sewage Pump, Cast Iron Construction, Pitmaster, 1/2HP 115Volt, 2” NPT Discharge Port, up to 9000 GPH, 10 Foot Power Cord, Automatic or Manual Operation, Tethered Float Switch
|
699.00 |
|
|
Simer 2385 Submersible Utility Pump, Geyser, 1/2HP
Simer Submersible Utility Pump, Thermoplastic and Stainless Steel Construction, Geyser, 1/2HP 115Volt Intermittent Duty Motor, up to 3000 GPH, Includes 1-1/4” FBSP and 1” NPT and Garden Hose and 1” Hose Barb and 1-1/4” Hose Barp Discharge Port Adapters, 8 Foot Power cord, Manual Operation
|
195.78 |
|
|
BURKS 5G5-1 1/4, Centrifugal Pump 115/230v 1PH 1/2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.63 Inches.
UNSPSC Code: 40150000
|
1375.20 |
|
|
BURKS 5GV6-1 1/4FC, Centrifugal Pump 115/230v 1PH 1/2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are Square Mouth Flanged Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.63 Inches.
UNSPSC Code: 40150000
|
2214.90 |
|
|
Myers Pumps ME40P-1 Effluent Pump 4/10Hp 115V
Myers ME40P-1 Cast Iron Effluent Pump Specifications
VOLTAGE: 1ø, 115V, 60 Hz
HORSEPOWER: 0.4 HP
AMP DRAW (full load): 12.0
MOTOR TYPE: Permanent Split Capacitor (PSC)
RPM: 1650
MAXIMUM HEAD: 32'
MAXIMUM CAPACITY: 80 GPM
SWITCH TYPE: Tethered Automatic
MINIMUM SUMP DIAMETER: Simplex 24" Duplex 36"
DISCHARGE PIPE SIZE: 1-1/2" FNPT
MAXIMUM SOLIDS HANDLING SIZE: 3/4" Spherical Solids
IMPELLER TYPE: Cast Iron, Two-Vane Enclosed
CORD LENGTH: 10'
CORD SIZE: 16-3; Type: SJTW
BODY CONSTRUCTION: Cast Iron
MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)
|
673.56 |
|
|
Sta-Rite 7P4CO2JL Submersible Well Pump 4” 1/2HP
Sta-Rite- Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 3 Wire, 1/2HP 230V, 1-1/4”NPT Port
|
639.75 |
|
|
Sta-Rite 7P4DO2JL Submersible Well Pump 4” 3/4HP
Sta-Rite- Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 3 Wire, 3/4HP 230V, 1-1/4”NPT Port
|
776.16 |
|
|
Sta-Rite PP1657 Overhaul Kit
Sta-Rite Overhaul Kit for the MS Pump includes the following items, Shaft Key, Shaft Seal, Spring Holder, Gaskets, Impellers, Wear Rings
Sta-Rite, Flotec, and Simer parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
272.09 |
|
|
Sta-Rite S7P4JP07231 Submersible Well Pump 4” 3/4HP
Sta-Rite- Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 3 Wire, 3/4HP 230V, 1-1/4”NPT Port, Built-in Check Valve
|
1420.56 |
|
|
Sta-Rite SNC-L Shallow Well Jet Pump 1/2HP
1/2 HP - 115/230 Volt - Shallow Well Jet Pump
The ProJet SN Series Pumps provide excellent performance with good pressure for wells to 25 feet deep. Self-priming after the priming chamber has been filled with water.
APPLICATIONS
Water systems and sprinkling
FEATURES
Quality Construction
Close grained cast iron body. Drain port provided for easy winterizing.
Built-in Jet
High strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service.
Noryl Impeller
Precision-molded for perfect balance ultra-smooth for highest performance and efficiency.
Precision Molded Diffuser
Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser.
Mechanical Shaft Seal
Precision lapped and highly polished carbonceramic, stainless steel construction. Internal design guarantees continuous water lubrication.
Motor Windings
Superior insulation materials protect against excessive moisture and contaminants assure prolonged motor life.
Balanced Rotor
Die cast under high pressures for uniform performance and greater efficiency, dynamically balanced.
Heavy-duty Ball Bearings
Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation.
Pump and Motor Shaft
Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment.
Dustproof Cover
All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components.
Pressure Switch
Professional quality, allows cut-in adjustments.
SPECIFICATIONS
Max. Liquid Temperature: 140°F
Max. Inlet Pressure: 50 PSI
|
869.76 |
|
|
STA-RITE U9-449 NOZZLE O'RING
Flotec, Simer, and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same
|
3.38 |
|
|
STA-RITE 101P1720 IMPELLER NOCCHI
|
55.51 |
|
|
STA-RITE 101P1730 IMPELLER
|
70.07 |
|