SeaLand VG4 J Series 24V Pump Replacement 385311230 Pump assembly for the VG4 (Vacuum generator 4) This assembly includes the following items: Pump to tank seal 2" Duckbills (4) 2" Check valve adapter Transition adapter 2" to 1.5" Pump mounting hardware Pump body Pump o'ring kit Bellows Bellows clamps Bellows bushing Eccentric Pump top closure Motor Pump cover  

SeaLand 385311858 T-Pump Body T-PUMP BODY Part # 385311858 or 311858

Get 10% OFF an N76-46P Pump Body Today!   Flotec N76-46P Pump Body   This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps. For use in Ponds, Fountains and watering the grass. The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.  For use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN. N76-46P, Pump Body, for use with 1/2, 3/4, 1 HP, Model PNC, PND, PNE, Series PN   Get Your Coupon Code Today!

SEALAND 385311844 S-SERIES PUMP BODY (8 BOLT) SeaLand by Dometic Vacuum pump body for all S-series Vacuum Pumps, except clamp type.

Sealand 317301200 T12 Discharge Pump 12V The “T” Series Discharge Pump is NOT a replacement for a vacuum pump.   Dometic/Sealand’s “TW” series pumps offer a unique bellows pump that can run dry without damage and pass solids up to ½” without clogging, making it more versatile than impeller-type pumps. This unit is self-priming up to 10 feet and can process 300 gallons per hour.   The “T” Series Discharge Pump 12V is energy efficient, drawing just 6 amps at 12 volts. “T” and “TW” discharge pumps are used to empty holding tanks or other tanks such as grey water or fish boxes.

Sealand T Series Discharge Pump 24V The “T” Series Discharge Pump is NOT a replacement for a vacuum pump.   Dometic/Sealand’s “TW” series pumps offer a unique bellows pump that can run dry without damage and pass solids up to ½” without clogging, making it more versatile than impeller-type pumps. This unit is self-priming up to 10 feet and can process 300 gallons per hour.   The “T” Series Discharge Pump 12V is energy efficient, drawing just 6 amps at 12 volts. “T” and “TW” discharge pumps are used to empty holding tanks or other tanks such as grey water or fish boxes.

SeaLand 307231505 Bulkhead Mounting Bracket SeaLand's 90° Mounting Bracket allows pumps to be installed in tight, spaces or away from standing water. Holes are pre-drilled for SeaLand T-Series and S-Series pumps. Made of heavy gauge stainless steel also includes Pump Noise Isolation Kit.

Sealand 385230980 Bellows Assembly for S and T Pumps The Sealand/Dometic VacuFlush bellows kit (230980) has been completely redesigned for improved durability and functionality on all S/T and J pumps in old and new styles. This kit comes complete with the eccentric bolt required for proper installation. The new bellows kit design can be easily identified because of its grey arm and grey bottom. We recommend changing the O-rings as well 385310151 for 8 bolt style or 385319039 for stainless steel band clamp.

Sealand 385311843 VALVE NIPPLE KIT for T-PUMP T-Pump Valve Nipples

Sealand 385310151 O'Ring Kit This set of 2 "O" rings will fit both S and T pumps that have 8 screws connecting the top and bottom together.

Sealand 385311226 Bellows Clamp S/T Pump  

Sealand 385311422 Pump Cover Kit for TW

Vacuflush S & T Pump Bushing Kit 385310242

Haight Pump 30U-VMS Pump Vit Mech Sl No Rv Features Pump Body: Ductile Iron Impeller: Steel Shaft  Seal: Viton Mechanical Seal Inlet Port is 3/4 inch NPT Discharge Port is 3/4 inch NPT   Haight 3U-VMS is a Ductile Iron Gear Pump, round hub Pump End Only less motor, 3 GPM rated, with Ductile Iron Construction, Viton Mechanical Seal, Steel Shaft, Steel Gears, Iron Rotor and Bearings. The standard construction materials of this pump are Ductile Iron Housing, Steel Shaft and Pinion Gears, Iron Rotor and Bearings, Buna N Lip Seals and Elastomers. These gear pumps have a Gear within a gear internal design and is very effective at handling a broad range of applications while operating at standard motor speeds, and reducing wear. Both of these operating characteristics play an important role in minimizing overall capital investment, and operating expenses. Compact rugged, and easy to maintain, these pumps are ideally suited to close-coupled mounting, or direct mounting to the motor. These pumps can operate at standard motor speeds, eliminating the need for pulleys/gear reducers. The involute gear design offers excellent suction characteristics, and minimizes noise and reduces internal bypassing It comes standard with self-lubricating gramix iron bearings, and easy to maintain Buna-N lip seals. The seals are installed in the UniverSeal design for simple and quick replacement, or change to alternate seal style. This is just the bare pump end, but there are optional mounting brackets which are designed for in-line mounting with standard NEMA frame size motors or bedplate mounting. These pumps are self-priming and will develop up to 27 inches of vacuum. Pumps will operate in either direction, and flow direction in the pump can be changed without disrupting the attached piping, or special tools.   Applications Petroleum Products Machine Manufacturing Applications Machine Tools Hydraulic Equipment Lubrication Systems Glue and Ink Soap and Detergent Products Building and Highway Contractors Paper Products Industries Automotive Applications Shipbuilding Applications Aircraft Applications Mining Applications  

Shurflo 8000-543-250-SKA-S Pump Assembly 12V Diaphragm Pump with 12 Volt DC Motor and 60 PSI Bypass. Polypropylene Pump Body, Viton Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. 1.4 GPM open flow.   Features : Pump Body:Polypropylene Impeller:Viton Shaft:Santoprene Port Size:Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. Motor Specs :12 Volt DC, Permanent Magnet, P/N 11-111-00.