Sealand T Series Discharge Pump 24V The “T” Series Discharge Pump is NOT a replacement for a vacuum pump.   Dometic/Sealand’s “TW” series pumps offer a unique bellows pump that can run dry without damage and pass solids up to ½” without clogging, making it more versatile than impeller-type pumps. This unit is self-priming up to 10 feet and can process 300 gallons per hour.   The “T” Series Discharge Pump 12V is energy efficient, drawing just 6 amps at 12 volts. “T” and “TW” discharge pumps are used to empty holding tanks or other tanks such as grey water or fish boxes.

Sealand 317301200 T12 Discharge Pump 12V The “T” Series Discharge Pump is NOT a replacement for a vacuum pump.   Dometic/Sealand’s “TW” series pumps offer a unique bellows pump that can run dry without damage and pass solids up to ½” without clogging, making it more versatile than impeller-type pumps. This unit is self-priming up to 10 feet and can process 300 gallons per hour.   The “T” Series Discharge Pump 12V is energy efficient, drawing just 6 amps at 12 volts. “T” and “TW” discharge pumps are used to empty holding tanks or other tanks such as grey water or fish boxes.

SeaLand VG4 J Series 24V Pump Replacement 385311230 Pump assembly for the VG4 (Vacuum generator 4) This assembly includes the following items: Pump to tank seal 2" Duckbills (4) 2" Check valve adapter Transition adapter 2" to 1.5" Pump mounting hardware Pump body Pump o'ring kit Bellows Bellows clamps Bellows bushing Eccentric Pump top closure Motor Pump cover  

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

Sealand 385311581 Duckbill Valve Kit 2" (4Pk) This 4 pack of 2" black duckbill valves for J, L, B & M-Series Vacuum pumps (311581).

SEALAND 385311844 S-SERIES PUMP BODY (8 BOLT) SeaLand by Dometic Vacuum pump body for all S-series Vacuum Pumps, except clamp type.

SeaLand 317201200 S-Series Vacuum Pump 12 VDC The S-Series Vacuum Pump. Used in all SeaLand / Dometic vacuum systems with a separate vacuum tank.

SeaLand 317202400 S-Series Vacuum Pump 24 VDC New whisper quiet operation High-strength polyethylene tank Prewired and assembled 24 VDC 5-amp fuse or circuit breaker.   Inlet: Vacuum generator 1.5-in. (38 mm) ID PVC pipe or sanitation hose from VacuFlush toilet. Vacuum pump 1.5-in. (38 mm) ID PVC pipe or sanitation hose from VacuFlush vacuum tank. Discharge: 1.5-in. (38 mm) ID PVC pipe or sanitation hose connected to holding tank system.

Sealand 385311843 VALVE NIPPLE KIT for T-PUMP T-Pump Valve Nipples

Sherwood P1732C-J Engine Cooling Pump JPR-S7632 JMP Marine JPR-S7632 Caterpillar and Sherwood Replacement Pump   See: https://www.clrmarine.com/m4/JMPMA%20JPR-S7632--jmp-marine-jpr-s7632-caterpillar-and-sherwood-replacement-pump.html

Sherwood P1735X-J Engine Cooling Pump JPR-S7619 for John Deere JPR-S7619 JMP Marine John Deere Replacement Engine Cooling Raw Water Pump See: https://www.clrmarine.com/m4/JMPMA%20JPR-S7619--jmp-marine-jpr-s7619-john-deere-re45458-replacement-engine-cooling-pump.html

Sherwood P1733X-J Engine Cooling Pump JPR-S7633 JPR-S7633 John Deere Replacement Engine Cooling Seawater Pump See: https://www.clrmarine.com/m4/JMPMA%20JPR-S7633--jmp-marine-jpr-s7633-john-deere-re515657-dz114697-engine-cooling-pump.html

Micropump GJ-N25.FF1S.J-P4 Pump Head I Drive Mt Micropump GJ-N25.FF1S.J-P4 Mag-Drive Gear Pump Head, Requires A-Mount compatible Drive. L25689 constructed of Base Material 316SS, Gear Material PTFE and Shaft Material 316SS. Micropump L25689 GJ Series Pumphead with Port/fittings 1/4-18 NPT Ports, Max Speed 5500 RPM, Max Pressure 300 psi and Max Temp 54.4444444444444 (C). Pump Series: GJ Series Ports/Fittings: 1/4-18 NPT Ports Min Speed (RPM): 500 Max Speed (RPM): 5500 Max Pressure (psi): 300 Min Temperature (°C): -46 Max Temperature (°C): 54.4444444444444 Max Diff. Pressure (psi): 49.03225806451613 Displacement (ml/rev): 0.91 Design: Standard Design Gear Set: 0.500/2/24 (0.91ml/rev) Gear Material: PTFE Static Seals: PTFE Gasket (.004) 5369 Base Materials: 316SS Drive Mount: I-Drive® IEG Bypass: No Driven: Ferrite Driving Magnet: I-Drive®, IEG High System Pressure: No Bushings: PTFE Shafts: 316SS Gear Trim: None Part Number: L25689 Model: GJ-N25.FF1S.J-P4

JMP Marine JPR-G6400 Detroit Diesel Replacement Seawater Pump Includes: JPR-G6400 Detroit Diesel Replacement Pump   Product Information & Specs: Uses JMP Impeller: 9000-01K Port Type: 2" Flange Pump Weight: 38.00 LBS (17.27 KG) Replaces Genuine Detroit Diesel Pumps: 23525078, 8927296 Replaces Jabsco Pump: Jabsco 18780-0001, 18780 For Engine Model(s): 12V71TI, 12V92TA, 16V149TA, SERIES 149   Parts Internally Compatible to Genuine: YES   Major Service Kit (All Internal Parts): JSK0027 (*Sold Separately) Minor Service Kit: JSM0004 (*Sold Separately)   Note: Detroit Diesel V71 Series engine uses 3 pump versions being either JPR-G6200, JPR-G6300, or JPR-G6400. To further confirm your pump model please make sure to review the pump images and cross reference information of each. JPR-G6200 (older engine models) JPR-G6300 (100GPM) JPR-G6400 (125GPM)   Product Features: 100% Plug & Play Replacement 100% Compatible Pumps & Parts Heavy Duty Marine Grade Casting Marine Grade Shaft (3X Series Non-Magnetic) Heavy Duty Bronze Cam Liner High Performance Impeller High Volume Flow Capacity

Oberdorfer 406M Series Flexible Impeller Macerator Pump Body: Bronze Ports: Inlet: 1 1/2" Threads Outlet 1" NPT or 1 1/2 Hose Flow: 25 GPM Max Pressure: 44 PSI Max, 100 feet of head Impeller: Neoprene Standard, Buna Optional Shaft Seal: Mechanical Seal Shaft: Stainless Steel Motor / Drive: These Close coupled Rubber Impeller Pumps are mounted directly onto the electric motor without the use of a shaft coupling. This pump is coupled to standard motors with Nema C flange. It uses a motor adapter plate to accommodate the pump. We can supply additional motors and assemble for you.       Easy Impeller Replacement Macerator Easily Replaced Reversible Wear Plate. Suction lifts of 15 ft. are possible when pump is fully primed.   Oberdorfer Flexible Impeller Macerator Pump, with 1HP, 24VDC, TEFC Motor   This item is 'build to order'. Please contact us for lead time.