Keep that handheld VHF radio or GPS receiver safely in reach at the helm with this popular radio holder. Opening is oval in shape with the Interior Dimensions at widest point being 3.15”X1.8” with additional clearance of ¼” for belt clip on the top ring. Overall Height 5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.

Large Handheld Electronics Holder. Opening is oval in shape. Interior Dimensions at the widest point are 3.15”x1.8”. Top ring has an additional ¼” clearance for belt clips. Overall Height 4.4”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included.

Small Handheld Electronics Holder. Interior Dimensions at the widest point are 2.3”x1.7”. Overall Height 4.4”. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included.

  Keep that handheld VHF radio or GPS receiver safely in reach at the helm with this popular radio holder. Opening is oval in shape with the Interior Dimensions at widest point being 3.15”X1.8” with additional clearance of ¼” for belt clip on the top ring. Overall Height 5”.           Includes the UniClamp, which fits round tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm).  Plus offers the option of bulkhead mount with enclosed screws.         Designed for permanent mounting.

SnapIt! Marine H002H Double Drink Holder for Sail & Power Boats Simply snap one of these unique drink holders onto the horizontal tubing on your boat and put an end to spills on the deck. Interior Dimension 3.6”(2.59” at narrowest point)X 7.35”. Overall Height 8.95”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. (Needs 8" of space between the deck and tube).

SnapIt! Marine M0019 Wine Glass Holder for Sail & Power Boats Wine Glass Holder, use the supplied retainer hoop for permanent mounting or use the unit without the hoop for the convenience of snapping the unit on to various tube locations. I.D. 2.05” Overall Height 1”.

SnapIt! Marine M001 Single Drink Holder for Power & Sailboats Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.

SnapIt! Marine V002 Double Drink Holder for Sail & Power Boats   Not just a drink holder! This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars.      Interior Dimensions 3.625” (3” at the narrowest point) x 7.85”.  Overall Height 3.95”. Includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm) round tubing. Plus offers the option of bulkhead mount with enclosed screws.

Keep that handheld VHF radio or GPS receiver safely in reach at the helm with this popular radio holder. Opening is oval in shape with the Interior Dimensions at widest point being 3.15”X1.8” with additional clearance of ¼” for belt clip on the top ring. Overall Height 5”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.

SnapIt! Marine M0023-350 Catalina 350 Model Specific Binnacle Drink Holder fits Catalina 350 Series II only and 387    This Drink holder Only Fits the Catalina 350 Series II and 387 with the pedestal that has the enclosed cabinet on it.   Features two integrated handheld electronics holders with interior openings of 2.875”x1.625” and 2.375”x1.625”. Overall height is 3.5".    This is a SPECIAL ORDER ITEM, made at time of order. NO Returns. Does not fit Catalina 350 MK II.

Small Handheld Electronics Holder. Interior Dimensions at the widest point are 2.3”x1.7”. Overall Height 4.35”. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included.

Large Handheld Electronics Holder. Opening is oval in shape. Interior Dimensions at the widest point are 3.15”x1.8”. Top ring has an additional ¼” clearance for belt clips. Overall Height 4.35”. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included.

Holds large cell phones and smaller GPS receivers and VHF radios. Interior Dimensions 2.3”X1.7” at widest points. Overall Height 3.8”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. Rotate clockwise to snap to tube and counter clockwise to remove.

The Grip-iT Device Holder Compatible with all models of *Apple iPods, including the iPod mini, Mobile phones,Iphone 6 Plus, Satellite Radios, PDA's, Portable Mp3 Players and Handheld GPS units.*Not compatible with iPod Nano. Provides a secure mounting option with easy installation. Adjustable Arms open to 4.5" wide to accommodate wide range of mobile devices. Arms also adjust to allow easy reach of device button controls. Mounts to air conditioning/heating vent in your vehicle and keeps your device secure. Made of durable ABS plastic that holds up to wear and tear. The PH-Grip-iT universal holder is designed for portable mobile electronics. The included Rotating Air Vent Mount makes for easy mounting to the louvers of your vehicles air vent to provide a stable, secure, and easily accessible mounting solution for your portable device. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SnapIt! Marine P003 Flush Mount Pontoon Quad Drink Holder This Quad Drink Holder is sized to fit can drinks with insulated sleeves and many mugs. The mug opening diameter is 3.625”. Interior Dimension are 3.895x8.12”. Overall Height 3.86”. Overall Width 18.4”. Cutouts on top ring can be useful for hanging sunglasses, etc. Flush mount unit not suited for use in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White