SnapIt! Marine M0023-350 Catalina 350 Model Specific Binnacle Drink Holder fits Catalina 350 Series II only and 387    This Drink holder Only Fits the Catalina 350 Series II and 387 with the pedestal that has the enclosed cabinet on it.   Features two integrated handheld electronics holders with interior openings of 2.875”x1.625” and 2.375”x1.625”. Overall height is 3.5".    This is a SPECIAL ORDER ITEM, made at time of order. NO Returns. Does not fit Catalina 350 MK II.

SnapIt! Marine M0023 Sailboat Binnacle Mounted Drink Holder     The M0023 Curved Binnacle Drink Holder offers the same functionality as the M005 but is designed to allow additional clearance for the compass on the pedestal. Holds four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard, no other mounting hardware is needed and NO drilling.               Order for specific tube diameter on 9.5" center to center spacing.           For pedestal guards with 12 or 12.5" center to center spacing please see model V0023.

The practical elegance of the SnapIt! M005 binnacle mounted drink holder with the added feature of the V Series versatile mounting system.   Hold an assortment of four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs!   Attaches directly to the pedestal guard, no other mounting hardware is needed and NO drilling. Versatile Mounting System includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm), and adjusts for 9.5, 12 and 12.5” center to center spacing on the pedestal guard.  Use #2 Phillips screwdriver to attach unit.    Narrow profile is designed for pedestal guards that sit forward of the compass housing.  For pedestal guards that have the compass sitting forward of the leading edge of the pedestal guard tubes please see SnapIt! models, M0023, V0023 or M0027.   Have pedestal guard on 9.5" centers and want the simplicity of snapping the unit in place?  See item M005.   17.375" Wide x 4.625" Deep x 3.375" High  

Convertible unit functions as a space saving Single or Double Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 4”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.Functional system for holding an assortment of four beverages or two drinks and a pair of binoculars. Early morning coffee? No problem. This unit is designed to accommodate mugs! It snaps directly to the pedestal guard. No additional mounting hardware is needed and NO drilling. If the compass on the boat extends forward of the leading edge of the tubes on the pedestal guard please see models M0023, M0027, V0023 or V0027. Order for specific tube diameter on 9.5" center to center spacing.   For pedestal guards with 12 or 12.5" center to center spacing please see model V005. 

Convertible 2 in 1 Drink Holder sized to fit can drinks or 20 oz plastic soft drink bottles. Space saving unit conveniently opens to hold two drinks when needed. I.D. 2.9” Overall Height 4.6”. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included.  Color:  White.

Convertible 2 in 1 Drink Holder sized to fit can drinks with insulated sleeves. Space saving unit conveniently opens to hold two drinks when needed. I.D. 3.4” Overall Height 4.6”. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included.  Color:  White.

No ugly square boxes allowed! This versatile binnacle mounted unit is much more than just a drink holder. The Pedestal Organizer includes the features of our standard units with the added benefit of a walled center section complete with drainage holes that allows for the storage of small items such as keys, wallets, pocket change as well as larger items such as binoculars and water bottles.   Order for specific tube diameter on 9.5" center to center spacing.   For pedestal guards with 12 or 12.5" center to center spacings please see model V0027.

Double Drink Holder for Power & Sailboats This Double Drink Holder is sized for canned drinks with insulated sleeves. Interior Dimension 3.625” (2.5” at narrowest point) X 7.85”. Overall Height 3.375”. Order to fit specific tubing size. Can be easily moved to different locations on the boat and stored below to avoid theft. Designed to mount at the “T” intersection of tubes on the handrails, bow or stern pulpits.

The V0023 Curved Binnacle Drink Holder offers the same functionality as the M0023 with clearance for the compass on the pedestal. It also holds four beverages, including mugs, or two drinks and a pair of binoculars. Verstile Mounting System includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm), and mounting locations for 9.5", 12" and 12 1/2" center spacing. Don't know your tubing diameter or center to center spacing--concerned about taking the unit with you when you upgrade?  No problem!  This unit fits the majority of standard binnacle guard sizes. No holes to drill!  All mounting hardware included! Have a pedestal guard on 9.5" center to center measurement and want the simplicity of snapping the unit in place?  See item M0023.

Attention Sailers!!! Do you have a Binnacle mounted compass that is looking really bad? Now is the time to update to a New Ritchie DNP-200 Navigator Compass. We have one in stock in our clearance section selling for have the price. Ritchie Navigator Compass Navigator Compass Features: 4-1/2" PowerDamp Flat Card Dial with Large Numerals Brushed Stainless Housing Ideal for both Power and Sail Boats Fits all Popular Sailboat Steering Pedestals Exclusive Built-in Green NiteVu Night Illumination Built-in Compensators to Easily Adjust for Deviation Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement Internal Gimbal Systems for Maximum Stability During Adverse Pitch and Roll Conditions Powerful DirectiveForce Magnets for Fast Heading Lock-on Movable Sun Shield 45 Degree Lubber Lines High Temperature Construction for Extended Operating Range Custom Fitted Protective Covers Available (weather shield model no. WS-P) Easily Installed, Fits 5.25" (13.35 cm) Mounting Hole 100% Repairable Exclusive 5-Year Ritchie Warranty   Get it today before it's gone at  https://www.clrmarine.com/m4/10377--ritchie-dnp-200-navigator-compass-binnacle-mount.html

SnapIt! Marine M0016 Single Lifeline Drink Holder for Sailboats This Classic Lifeline Drink Holder is sized for canned drinks with insulated sleeves. I.D. 3.5” Overall Height 10.15”. Guaranteed not to fall off accidentally! You get One drink holder this is longer than the V0016.

No ugly square boxes allowed! This versatile binnacle mounted unit is much more than just a drink holder. The Pedestal Organizer includes the features of our standard units with the added benefit of a walled center section complete with drainage holes that allows for the storage of small items such as keys, wallets, pocket change as well as larger items such as binoculars and water bottles. V Series versatile mounting system includes the UniClamp, which fits tubing diameters from 3/4" (19mm) through 1 3/8" (35 mm), and mounting locations for 9.5", 12" and 12 1/2" center to center spacing.  No drilling required!  Use #2 Phillips Screwdriver to attach unit. Don't know your tubing diameter or center to center spacing--concerned about taking the unit with you when you upgrade?  No problem!  This unit fits the majority of standard binnacle guard sizes. Have a pedestal guard on 9.5" center to center and want the simplicity of snapping the unit in place?  See item M0027. 16.25" Wide x 6" Deep x 3.375" High   Custom made at time of order, none returnable.

SnapIt! Marine M001 Single Drink Holder for Power & Sailboats Single Drink Holder sized for canned drinks with insulated sleeves. I.D. 3.625” Overall Height 3.5”. Order to fit specific tubing size. Furnished with “U” Clamp and screws for permanent mounting if so desired.

SnapIt! Marine H002H Double Drink Holder for Sail & Power Boats Simply snap one of these unique drink holders onto the horizontal tubing on your boat and put an end to spills on the deck. Interior Dimension 3.6”(2.59” at narrowest point)X 7.35”. Overall Height 8.95”. Order to fit specific tubing size. Designed to be easily moved to different locations on the boat and stored below to avoid theft. (Needs 8" of space between the deck and tube).

  Redesigned to be even more practical and versatile. This economical Single Drink Holder is sized for canned drinks with insulated sleeves. New bottom pad allows unit to hold a wider variety of drinks and new top ring allows the unit to hold small mugs.               I.D. 3.375” Overall Height 3.375”.               Order to fit specific tubing size.             Can be easily moved to different locations on the boat and stored below to avoid theft.