8 Channel NVR Kit with 6 Outdoor IR 5MP IP Cameras 2.8mm Fixed Lens - 2TB Features: EZ Wizard: for easy network and system setup EZ Record: set up recording resolutions and recording type EZ Copy: copy what you are playing onto a USB flash drive EZ App Setup: just scan a QR code with the app to view your cameras on your mobile device Recorder Features: Up to 8MP resolution for live view, recording, and playback Plug & Play – get video automatically via the PoE ports without any setup  Supports streams up to H.265 for reduced bandwidth and reduced hard drive space requirements  QR code-based network setup for easy remote access  Free US-based DDNS service  4K monitor output  Gigabit Ethernet port  Built-in S.M.A.R.T technology (Self-Monitoring, Analysis and Reporting Technology for HDD)  Object and line crossing detection and alerts*  Remote monitoring via PC and mobile apps  2TB storage  Expansion available for up to 8 cameras  Analytics available with optional O8K1A camera  Facial Recognition  Human Detection  Vehicle Detection Camera Features (ONLY WORKS WITH THIS KIT): Supports up to 5MP resolution 2.8mm wide-angle lens True Day/Night operation (IR cut filter) IR range up to 100ft (built-in IR LEDs) Supports H.265/H.264 compression  IP66 compliant, weather-resistant What’s in the box? NVR with 2TB hard drive Six 5MP cameras Six 60ft Ethernet cables One 3ft Ethernet cable Remote control (batteries included) 48V Power adapter HDMI cable

4 Channel NVR Kit with 4 Outdoor IR 5MP IP Cameras 2.8mm Fixed Lens, 1TB Kit NDAA Monitor your property with the 4-Channel 5MP NVR with 1TB HDD & 4 5MP Outdoor Network Turret Cameras from Speco Technologies. The 4-channel NVR manages and can record from up to 4 cameras. It comes preinstalled with a 1TB HDD. HDD capacity is expandable to 8TB if more storage space is required. H.265 and H.264 video compression reduces bandwidth requirements for efficient data storage while maintaining the best possible video quality. Remote viewing is possible via the Speco Gray Viewer for Windows & Mac PCs and the Speco Gray app for iOS & Android. The included 5MP turret cameras have a 1/2.7" CMOS sensor to capture 2592 x 1944 resolution video. They have a 2.8mm fixed lens with IR LEDs that provide up to 100' of night vision. The cameras are IP66-rated for outdoor use. Features: Plug-and-play operation HDMI and VGA video output RCA audio output 4K UHD monitor output Gigabit Ethernet port Two USB 2.0 ports Built-in S.M.A.R.T technology (self-monitoring, analysis, and reporting technology for HDD) Daylight saving time Free US-based DDNS service Compatible with Windows 7 or above, Mac OS X 10.9 or above, iOS, Android, Internet Explorer 8-11, and Safari 5.1 or above

4MP H.265 AI IP Dome Camera with IR - 2.8mm Fixed Lens & Junction Box Features: Supports up to 4MP @ 30fps Built-in standard PoE (IEEE 802.3af) H.265/H.264/MJPEG compression supported True Day/Night operation (IR cut filter) Adaptive IR LEDs reduce IR saturation IR range: Up to 98FT (depending on scene reflection) Micro SD slot up to 256GB (card not included) True WDR (wide dynamic range) operation IP67 compliant, weather resistant IK10 compliant, vandal resistant Junction box included (works with NPT/BSP specifications) Conformant with ONVIF Profile T 5-year warranty UL Listed NDAA Compliant Technical Specifications: Power - DC Jack Maximum Resolution - 2592 x 1520 Field of View - 95.3°(H) , 53.2°(V), 115°(D) White Balance - Auto, Indoor, Outdoor, Manual Operating Temperature - -40°F 140°F Unit Dimensions - 4.7” (Dia.) x 3.5” (H)  Unit Weight - 1.43 lb

4MP Intensifier AI IP Camera with Junction Box - 2.8mm Fixed Lens Features: Intensifier® Technology captures in full color in extreme low-light scenes Captures up to 4MP @ 30fps real time  True WDR operation Micro SD card slot (card not included) Conformant with ONVIF Profile G/S/T IP67 compliant, weather resistant IK10 compliant, vandal resistant Built-in standard PoE (IEEE 802.3af) Line crossing with counting/Intrusion detection Face/Person/Vehicle Detection NDAA Compliant Junction box included (works with NPT/BSP specifications) FCC Certified 5-year warranty Technical Specifications: Power - PoE, 12VDC (power supply not included) Maximum Resolution - 2560 × 1440 Field of View - H.FoV: 110°; V.FoV:60°; D.FoV:130° White Balance - Auto, Indoor, Outdoor, Manual Audio Input - Built-In Mic and 3.5mm Input Card Slot - MicroSD, up to 256GB (not included) Operating Temperature - -40°F - 140°F Unit Dimensions - 4.68” (Dia.) x 3.5” (H) Unit Weight - 1.43 lbs

4MP H.265 AI Bullet IP IR Camera - 2.8mm Lens & Junction Box Features: Supports up to 4MP @ 30fps Built-in standard PoE (IEEE 802.3af) H.265/H.264/MJPEG compression supported True Day/Night operation (IR cut filter) Adaptive IR LEDs reduce IR saturation IR range: Up to 100 FT (depending on scene reflection) Micro SD slot up to 256GB (card not included) True WDR (wide dynamic range) operation IP67 compliant, weather resistant Junction box included (works with NPT/BSP specifications) Conformant with ONVIF Profile G/S/T 5-year warranty UL-listed NDAA Compliant Technical Specifications: Power - DC Jack Maximum Resolution - 2592 x 1520  Field of View - 95.3°(H) , 53.2°(V), 115°(D)  White Balance - Auto, Indoor, Outdoor, Manual  Operating Temperature - -40°F 140°F  Unit Dimensions - 2.9” (W) x 2.9” (H) x 6.6” (D)  Unit Weight - 1 lb.

8 Channel 4K Recorder for IP Cameras Only - Power Over Ethernet Record from and manage up to eight cameras at resolutions up to 3840 x 2160 with the NRL Series 8-Channel 8MP NVR with 2TB HDD from Speco Technologies. It is equipped with a SATA port that supports an HDD up to 14TB (2TB preinstalled). H.265 and H.264 compressions keep file sizes manageable while maintaining the best quality possible. Two-way audio communication is supported. This NVR supports simultaneous HDMI and VGA outputs, as well as up to 10 users. It complies with ONVIF version 2.3 for interoperability with cameras that are ONVIF compliant. Features: Eight PoE ports Two USB ports 4K UHD HDMI video output Easy video export via USB Built-in S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology for HDD) Smart Search with Speco Smart analytic cameras (available separately) Compatible with most cameras that comply with ONVIF profile S Plug-and-play feature with isolated traffic on PoE ports with Speco IP cameras (available separately) EZ Wizards simplify use and setup Find and install IP cameras on the local network without the need to locate the cameras manually Instant playback for individual channels directly from the live view screen Create bookmark pins on playback for easy reference Customizable channel view placement Smart analytics include abandoned object detection, missing object detection, and line crossing Recording modes include analytics, continuous, motion, sensor, schedule, and manual Alarm trigger events include recording, PTZ, alarm out, pop-up alarm preview, email, FTP, snapshot, buzzer & screen tips Free US-based DDNS and P2P services Compatible with Internet Explorer, SecureGuard VMS, and Speco Blue app for iOS and Android

4MP HD-TVI Mini Turret Camera 2.9mm Lens - White Housing Features: 2.9mm fixed lens 1/3” Progressive Scan CMOS, 4MP Compact size – only 2.36” in diameter! 12 IR LEDs Cast aluminum construction Signal distance up to 1600 feet Full OSD operation via UTC (TVI output only) Vandal resistant IP66 compliant, weather resistant 12VDC operation 5 year warranty *Also available in dark gray housing

Heat Shrink Kit with 6-In-1 Wire Tool & Connectors Features: Wire Stripper 22 - 10 Gauge (AWG) Connector Crimper 22 - 10 Gauge (AWG) Wire Cutter Plier Tip Wire Loop Machine Screw Cutter What's Included? (8) Butt Connectors For 16-14 Gauge (AWG) wire

Goulds 16Bfk1 - 5 1/8 Kit W/ 5 1/8 Trim  

4MP HD-TVI Mini IR Turret with 2.9mm Lens - Grey Monitor your property with the miniature dark-gray aluminum 4MP Outdoor HD-TVI Mini-Turret Camera with Night Vision from Speco Technologies. Featuring a 4MP CMOS sensor and a 2.9mm fixed lens, this camera transmits video at resolutions up to 2560 x 1440 at 15 fps. The camera is equipped with IR LEDs for up to 35' of night vision, enabling you to capture video in even total darkness. Designed for outdoor use, the camera is housed in an IP66-rated weather-resistant enclosure. The UTC (Up-the-Coax) connection allows for OSD control of the camera. Features: Up to 2560 x 1440 resolution video at 15 fps over coax 12 built-in IR LEDs for up to 35' of night vision Signal distance up to 1600' Progressive scanning system Automatic gain control Automatic white balance Internal synchronization Runs on 12 VDC (power supply available separately) Vandal-resistant cast aluminum enclosure IP66 rated for outdoor use FCC and RoHS certified Miniature form factor, suitable for use in vehicles

High Definition 3MP IP Mini Dome Camera - 2MP Resolution - 316 Stainless Steel & 120-Degree Horizontal Field of View - 2.8mm Lens Iris’s SX60 range of miniature marine-grade stainless steel cameras is available in multiple formats and delivers the highest quality video to suit your application. The IRIS-S460 is a high-definition 3MP IP camera that is directly compatible with Raymarine chart plotters (running LH2 / LH3 software), Navico MFDs (Simrad, Lowrance, B & Gs), and Furuno Timezero software v4.1 and above. Compatible with Garmin via the CMAC series of switchers, interfaces, and recorders. The IRIS-S460 features built-in Power over Ethernet (PoE) or 12VDC operation and is ONVIF compliant, supporting multiple streams, variable bitrates, and a host of image settings, including image mirror and flip, color, contrast, and brightness settings. The S460’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment and is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger's vessels, while fitting in equally well with the high-end aesthetic of luxury vessels and mega yachts. Measuring only 58mm high by 60mm in diameter, the S460 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells. Built-in infrared LEDs operate automatically via a day/night filter to provide illumination up to 10 meters at night and in low-light conditions. Whether you need a high-quality and rugged camera as part of your onboard surveillance system, for engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, the IRIS-SX60 range of cameras is the perfect solution. Features: Marine Grade 316 Stainless Steel rugged corrosion-free case Compatible with Raymarine / Axiom chart plotters running LH2 and higher Compatible with Simrad, Lowrance & B & G Compatible with Furuno software running TZ4.1 and above Garmin Compatibility in conjunction with CMAC Systems High polish finish Built-in infra-red LED illumination (10m Range) PoE & 12VDC connections Extremely low power consumption IP66 environmental protection Specifications: Lens (millimeter): 2.8mm Horizontal Field of View: 120-degree HFOV Sensor (inch): 1/4” CMOS Sensor Resolution: Variable - 1920x1080P (2MP) max Interface: RJ45 10/100 base t ethernet Video Processing: H.264 Codec / dual stream Protocols/Video Format: TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF Onvif: Profile S v2.4 Bitrate: VBR / CBR 32kbps 8Mbps Illumination: 6 x 850nm infra-red - 10-meter range Lens/Field of View: 2.8mm option Mirroring: Horizontal & vertical - configure via browser Automatic Gain control: Supported / multiple levels Compatibility:  Raymarine / Axiom (LH2 or higher), NAVICO MFDs inc SIMRAD / LOWRANCE, B & G, Furuno Timezero v4.1 and higher. PC-based systems, MFDs with digital (HDMI / DVI) Input, MFDs via IRIS NVR/HVR, IE Browser, CMAC systems Operating Temperature: -30 +60 Connections: Water-resistant RJ45 Socket / non-PoE with DC power socket Material: 316 Stainless Steel Power: PoE IEEE802.3af / 12VDC <200mA max. Weight & Dimensions: 0.420Kg / 59.5mm ø x 52.93mm H Environmental: IP66

IP Cam-1 Stainless Steel POE IP Camera IP CAM-1 stainless steel marine video camera, which comes preconfigured for compatible B & G and Simrad multifunction displays. Lowrance® compatibility will be introduced with the 20.3 software release.  This easy-to-install marine camera, with rugged 316 stainless steel housing, offers improved vessel awareness and peace of mind that comes with monitoring a location on or around your boat – day or night. Improved Vessel Awareness Keep an eye on locations onboard or in close proximity to your boat with the IP CAM-1. Mount the camera in a rear-facing position for use as a reverse camera or install it facing forward, for a better view ahead of your boat. High-performance IR LEDs keep the camera fully functional at night or in dark areas. Rugged Construction The rugged 316 Stainless steel housing is designed to withstand the harshest marine environments, making it the perfect solution for any mounting locations exposed to the elements.  Simple Setup The IP CAM-1 comes preconfigured for compatible multifunction displays* and can be powered via Power Over Ethernet (POE) or 12V power supply. Add multiple cameras to your boat’s network and cycle through each camera view on a compatible display. Features: Simple set up with compatible B & G Zeus3 and Zeus3S Multifunction and Glass Helm Displays, Simrad NSS evo3, NSSevo3S™, NSO evo3, and NSOevo3S™ multifunction displays, and the Lowrance HDS LIVE chartplotter/fishfinder* Rugged 316 stainless steel construction designed to withstand saltwater environments 1920 x 1080 Resolution with select multifunction display models Nighttime and dark area operation high-performance IR LEDs (10m range) 1.8mm wide-angle lens Power Over Ethernet (POE) or 12V supply options *Lowrance compatibility will be introduced with the 20.3 software release.

NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint! As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power. The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power. Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to! This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels. Order the NXL-M4 for insane power out on the water! Features: Hardware resistant to corrosion and UV Protection Coated 4 Layers PCB to prevent corrosion IPX5 Water Resistance Grade High Level Input For Radio Use Front cover to keep the controls safe to the elements LED Clip Indicator to easier adjustment Stable and Reliable Class D Circuit Design Sound Quality Verification Using AP Instruments Direct Insert Power and Speaker Terminals Short Circuit, Thermal, and Voltage Protection Technical Specifications: Number of Channels - 4 Frequency Response - 20Hz - 20KHz  2 Ohm RMS Power Per Channel - 4 x 230W  4 Ohm RMS Power Per Channel - 4 x 150W  4 Ohm RMS Power Bridge Channel - 2 x 440W  Signal-to-Noise Ratio - >90dB  Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7" *Sold as an Individual

IP Camera Recorder with IrisControl for Garmin OneHelm Host - 1TB HDD - 32 IP Camera Inputs You’re in Control… CMAC™ is a feature-rich command, management, and control system for your onboard cameras and alarms. Upload your deck plans, set up your onboard cameras and alarms, and control everything from your chartplotter with the Iris Control App. High-Definition Digital Output CMAC systems feature a high-definition HDMI digital video output to provide the very best live, high-quality footage on compatible chartplotters, TVs, and dedicated monitors. CMAC can also be used with standard definition devices with any HDMI to composite video converter. IRIS Control HTML5 App Manage and control your onboard cameras and alarms via the Iris Control HTML5 app. Upload your deck plans and photos, drag and drop the dedicated camera and alarm icons, and you now have the most feature-rich and intuitive marine security and surveillance system in the world. Navigate through your deck plans and select camera icons to switch video inputs, control PTZ cameras via the ultra-responsive virtual joystick, configure and select camera tours and scans, activate thermal color palettes, gyro control, and much, much, more! Iris Control frees up helm space by removing the need for additional control hardware and joysticks. USB Touch Control In addition, to control your compatible MFD network, CMAC features a USB touch control interface. This means chart plotters with USB touch outputs, such as Garmin’s 8000 series, can be used to drive your PTZ cameras with pinpoint accuracy. WiFi / Remote P2P Connectivity Connect CMAC to your onboard WiFi router and view your cameras from around your boat on your smartphone, tablet, or computer. Perfect for keeping an eye on what’s happening above from the below deck! CMAC can also be accessed remotely via P2P connectivity if you have internet access. Integrated Network Video Recorder CMAC built-in recorder is fully configurable to maximize storage time, adjust resolutions and frame rates, set video motion detection, and much more. Features: 1 terabyte hard disc drive This is an IP camera only version that can connect up to 32 cameras Wired for a Garmin unit Fully integrated camera and alarm control & management system for boats Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control Garmin onehelm™ integration with the IrisControlTM app Control and switch your cameras from your Garmin MFD. Configure your boat alarm system, control individual and group alarms Razor-sharp, scaled control via IrisControl’s virtual joystick Full-screen touch control with Garmin’s USB touch (on available models) Firmware is upgradable to unlock features as & when they become available

Hybrid Camera Recorder - No IrisControl - 1TB HDD - 8 Analogue & 4 IP Camera Inputs You’re in Control… CMAC™ is a feature-rich command, management, and control system for your onboard cameras and alarms.  Multiple Camera Formats Hybrid models accept analog, AHD (HD-TVI / HD-CVI), and IP formats. By supporting multiple formats, not only does CMAC offer maximum compatibility, but it also future-proofs your system should you decide to upgrade your cameras. High-Definition Digital Output CMAC systems feature a high-definition HDMI digital video output to provide the very best live, high-quality footage on compatible chartplotters, TVs, and dedicated monitors. CMAC can also be used with standard definition devices with any HDMI to composite video converter. USB Touch Control In addition, to control your compatible MFD network, CMAC features a USB touch control interface. This means chart plotters with USB touch outputs, such as Garmin’s 8000 series, can be used to drive your PTZ cameras with pinpoint accuracy. WiFi / Remote P2P Connectivity Connect CMAC to your onboard WiFi router and view your cameras from around your boat on your smartphone, tablet, or computer. Perfect for keeping an eye on what’s happening above from the below deck! CMAC can also be accessed remotely via P2P connectivity if you have internet access. Integrated Network Video Recorder CMAC built-in recorder is fully configurable to maximize storage time, adjust resolutions and frame rates, set video motion detection, and much more. Features: 1 terabyte hard disc drive This hybrid version can connect 4 IP cameras and 8 analog cameras  Wired for a basic unit Fully integrated camera and alarm control & management system for boats Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control Control and switch your cameras Configure your boat alarm system, control individual and group alarms Firmware is upgradable to unlock features as & when they become available