Power Auger Extension - 12" Stationary Power Auger Extensions bolt directly to the power head and auger unit. Easy to install. Stationary Auger Extensions will extend your boring depth an additional 8, 12, or 20 inches depending on size. Features: Stationary Power Auger Extensions bolt directly to the power head and auger unit Easy to install Stationary Auger Extensions will extend your boring depth an additional 12 or 20 inches depending on the size WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power Auger Extension - 20" Stationary Power Auger Extensions bolt directly to the power head and auger unit. Easy to install. Stationary Auger Extensions will extend your boring depth an additional 12 or 20 inches depending on size.  Features: Stationary Power Auger Extensions bolt directly to the power head and auger unit Easy to install Stationary Auger Extensions will extend your boring depth an additional 12 or 20 inches depending on the size WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

30AM/15AF Power Grip Marine 12" Dogbone - M-Locking/90F Adapter The Camco 30 amp male locking end to 15 amp female standard end adaptor is a 12-inch adapter cord with a threaded locking ring that creates a weatherproof connection on the 30 amp male side. The durable STW cord is used to convert a 30-amp marine type connection to a 15-amp standard receptacle. Use this adaptor to plug in common tools, radio, lights, blender, etc. to a marine type power pedestal. Rated for 125 volt. Features: 30 amp locking NEMA L5-30P male end with 15 amp NEMA 5-15R female end 12-inch adapter Threaded locking ring creates a weatherproof connection Durable, long-lasting 10/3 STW cord 90 degree turn from male to female end

50AM/30AF Power Grip Marine 12" Locking Adapter - M-Lock/F-Locking Adapter The Camco 50-amp male locking adapter to 30-amp female locking adapter is a 12" adapter cord with a threaded locking ring that creates a weatherproof connection. The durable, long-lasting STW cord has a 180 degree turn from male to female end. Features: 50 AMP locking male end with 30 AMP locking female end 12-inch adapter Threaded locking ring creates a weatherproof connection Durable, long-lasting STW cord 180 degree turn from male to female end

Power Cable RA 12 AWG - 100' FLIR's Power Cable RA 12 AWG comes 100 feet in length.

CAM-PT-300-02 Aluminum PowerTower® for Cameras - 12" The ingenious Camera Power Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse. Compatible with: FLIR - M100 / M200, M132, M232 cameras IRIS s118, s290, s295, s390, s395, s418 cameras Features: Designed to fit the most up to date cameras Pre-drilled mounting holes allow the camera to fasten straight to the PowerTower® No need to cut the cameras connectors off for installation  Constructed from Marine grade Aluminium Technical Specifications: Material - Aluminium Height - 11.81" (300mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

Groco S-87-B Tie Rod .250 X 12.813  

Groco S-84 Tie Rod, Monel .5 X 12.125  

Shurflo 8000-543-250-SKA-S Pump Assembly 12V Diaphragm Pump with 12 Volt DC Motor and 60 PSI Bypass. Polypropylene Pump Body, Viton Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. 1.4 GPM open flow.   Features : Pump Body:Polypropylene Impeller:Viton Shaft:Santoprene Port Size:Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. Motor Specs :12 Volt DC, Permanent Magnet, P/N 11-111-00.

Lithium 40V Lazer™ Ice Auger - 8" Built from the ground up with the features that make a difference on the ice, the new StrikeMaster® Lithium 40V combines decades of ice-auger experience with leading-edge design and power engineering. This auger will muscle through ice hole after hole. Its 40-volt, 5-amp hour lithium-ion battery powers an electric DC brushless motor for reliable, constant speed and torque. A planetary gear system provides lightweight durability and high power density for unmatched performance. Innovative high-performance cutting via the legendary StrikeMaster® Lazer™ blades provides the fastest cutting edge, period. Custom impact-resistant handles with ergonomically placed opposing deadman/power switch and built-in LED lights. Forward/reverse control runs in forward for cutting and reverse to flush slush from the hole. The 2-amp rapid charge battery charging station charges the battery back to full charge in 2-1/2 hours.  Powerhead/Motor Electric DC Brushless Motor Planetary Gear System 15.9:1 Gear Ratio Power Button with Deadman Safety Switch Forward and Reverse Built-in LED Lights Impact-Resistant Long Filament Handles Blades Twin Serrated Stainless Steel Lazer™ Blades Battery 40V, 5-Amp Hour Lithium ION Battery Internal Battery Management System Ensures Battery Longevity 4 LED Battery Status Indicator 2-Amp Charging Station (Recharges battery in 2-1/2 hours) Battery and Charger Included 100 holes - 8" auger on a single charge* Based on repeated tests with 16" of ice Limited 2-Year Manufacturer’s Warranty on Motor, Battery and Charger WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lithium 40V Lazer™ Ice Auger - 10" Built from the ground up with the features that make a difference on the ice, the new StrikeMaster® Lithium 40V combines decades of ice-auger experience with leading-edge design and power engineering. This auger will muscle through ice hole after hole. Its 40-volt, 5-amp hour lithium-ion battery powers an electric DC brushless motor for reliable, constant speed and torque. A planetary gear system provides lightweight durability and high power density for unmatched performance. Innovative high-performance cutting via the legendary StrikeMaster® Lazer™ blades provides the fastest cutting edge, period. Custom impact-resistant handles with ergonomically placed opposing deadman/power switch and built-in LED lights. Forward/reverse control runs in forward for cutting and reverse to flush slush from the hole. The 2-amp rapid charge battery charging station charges the battery back to full charge in 2-1/2 hours.  Powerhead/Motor Electric DC Brushless Motor Planetary Gear System 15.9:1 Gear Ratio Power Button with Deadman Safety Switch Forward and Reverse Built-in LED Lights Impact-Resistant Long Filament Handles Blades Twin Serrated Stainless Steel Lazer™ Blades Battery 40V, 5-Amp Hour Lithium ION Battery Internal Battery Management System Ensures Battery Longevity 4 LED Battery Status Indicator 2-Amp Charging Station (Recharges battery in 2-1/2 hours) Battery and Charger Included 70 holes - 10" auger on a single charge* Based on repeated tests with 16" of ice Limited 2-Year Manufacturer’s Warranty on Motor, Battery and Charger WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Two-Stage Drill Adapter for Auger Drills Turn any professional quality 18v cordless electric 1/2" chuck drill into a portable, lightweight, and efficient power ice auger that makes fast work of any depth of ice. For use with StrikeMaster® hand and power auger drills. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lite-Flite Lazer™ Drill - 6" Ultimate advancement for run & gun ice trolling! The lightweight Lite-Flite Lazer™ Drill Unit is designed to be used with any professional quality 18V (or higher) brushless hand-held cordless electric 1/2" chuck drill or StrikeMaster® ice auger power head. The full-length segmented flight is molded with a proprietary blend of synthetic resins. Heavy-duty steel hex shaft and reinforced “T” connection to carriage for strength. The carriage is formed from exclusively engineered compounds for unbeatable durability allowing you to drill every hole with confidence. PowerPoint keeps the drill unit in place while drilling. The twin chrome-alloy stainless steel Lazer™ blades ensure a smooth, clean cut every time. Features: Proprietary Synthetic Resin Molded Flighting Full-Length Segmented Flighting Carriage Formed from Exclusive Engineered Compounds Reinforced “T” Connection to Carriage with Heavy-Duty Steel Hex Shaft Includes: NDA-3 Two-Stage Drill Adapter & Protection Flange Twin Chrome-Alloy Stainless Steel Lazer™ Blades 1-Year Manufacturer’s Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

Lazer™ Power 8" Replacement Blades Twin Serrated, Stainless Steel Lazer Blades for Lazer Power Augers. Includes four blade screws and two blades. Lazer Mag, Lazer Mag Xpress, Lazer XL-3000, Electra Lazer, Lazer Pro, Lazer 224 & Lite-Flite. Features: Twin Serrated, Stainless Steel Lazer Blades for Lazer Power Augers Includes four blade screws and two blades Lazer Mag, Lazer Mag Xpress, Lazer XL-3000, Electra Lazer, Lazer Pro & Lazer 224 and Lite-Flite WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.