SikaBiresin® CH72-2 Medium Cure - Pale Amber - Quart Applications: High performance marine boats, parts, and tooling applications Suitable for wet layup, vacuum-bagging, infusion  Features: Epoxy lamination system Low viscosity for excellent wet-out Three hardener choices: SikaBiresin® CH72-1 (Fast), SikaBiresin® CH72-2 (Medium), SikaBiresin® CH72-3 (Slow) UV resistant Above or below waterline applications RoHS and REACH compliant Non-styrene Excellent bond to all fabrics Suitable for aramid fiber laminates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® CH72-1 Fast Cure - Pale Amber - Quart Applications: High performance marine boats, parts, and tooling applications Suitable for wet layup, vacuum-bagging, infusion  Features: Epoxy lamination system Low viscosity for excellent wet-out Three hardener choices: SikaBiresin® CH72-1 (Fast), SikaBiresin® CH72-2 (Medium), SikaBiresin® CH72-3 (Slow) UV resistant Above or below waterline applications RoHS and REACH compliant Non-styrene Excellent bond to all fabrics Suitable for aramid fiber laminates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® CH72-3 Slow Cure - Pale Amber - Quart Applications: High performance marine boats, parts, and tooling applications Suitable for wet layup, vacuum-bagging, infusion  Features: Epoxy lamination system Low viscosity for excellent wet-out Three hardener choices: SikaBiresin® CH72-1 (Fast), SikaBiresin® CH72-2 (Medium), SikaBiresin® CH72-3 (Slow) UV resistant Above or below waterline applications RoHS and REACH compliant Non-styrene Excellent bond to all fabrics Suitable for aramid fiber laminates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® CR72 - Pale Amber - 1 Gallon Applications: High performance marine boats, parts, and tooling applications Suitable for wet layup, vacuum-bagging, infusion  Features: Epoxy lamination system Low viscosity for excellent wet-out Three hardener choices: SikaBiresin® CH72-1 (Fast), SikaBiresin® CH72-2 (Medium), SikaBiresin® CH72-3 (Slow) UV resistant Above or below waterline applications RoHS and REACH compliant Non-styrene Excellent bond to all fabrics Suitable for aramid fiber laminates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ampco Pumps CB+114M14T-S-3.75 Peo 1 1/2 X 1 1/2 Kit

SikaBiresin® AP077 White Quart BPO Hardener Required SikaBiresin® AP077 is a polyester filler and fairing compound that offers the user a smooth workable paste with a set fast cure to expedite those applications for repair or finish. It is easier to sand than conventional fillers and can be finished to a feather edge. This material can be easily applied with a squeegee, spatula, or flat tool, and once cured will accept virtually all types of coatings and decorative films. Features: Exceptional adhesion Very quick setting Minimal shrinkage Usage: SikaBiresin® AP077 can be used in the following applications: gel coat blister repair, fiberglass parts repair, and filling cloth imprint on FRP panels. This material has excellent adhesive and bond strength to fiberglass, SMC, FRP, epoxy, graphite, and Kevlar® composites as well as aluminum, wood, and other substrates. Advantages: Exceptional adhesion Very quick setting Minimal shrinkage High service temperature Excellent finishing and machinability Accept virtually all types of finishes Low moisture absorption for above or below waterline applications

Women's Rebel Foam Vest - Grey/Red - Small/Medium  This high-performance front-entry women’s foam vest features an Adjust-a-Bust system for support and a Z-Strap cinch to create a comfortable, secure fit for serious paddlers and sailors.  The short frame design, contoured foam panels, and racerback deliver maximum mobility.   Six points of adjustment, removable underbust memory foam pads, and padded neoprene shoulders ensure all-day comfort, while fleece-lined pockets keep your hands toasty warm when it's cold out.   Features: Front entry with zipper for convenient donning and doffing Z-Strap cinch system for a comfortable and secure fit 210/420D ripstop nylon shell is durable Women's specific fit has six points of adjustment Adjust-a-Bust fit system provides support and prevents riding-up Padded adjustable neoprene shoulders create all-day comfort Daisy chain attachments secure essentials Lash tab for affixing gear Fleeced-lined pockets with tethered loops warm hands Expanding cargo pockets with a key clip keep personal items accessible Reflective trim on the front, back, and shoulders enhances visibility in low light conditions Tethered signal whistle for emergencies Certifications: U.S.C.G. - UL1123 - Marine Buoyant Devices 160.064 - Type III Technical Specifications: Color - Grey/Red Size - Small/Medium Chest Size - 29' to 40" (74 to 102 cm) Weight Capacity - ≥ 90 lb (≥ 41 kg) *Sold as an Individual  WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Women's Destiny Foam Vest - Merlot/Grey - Small/Medium  This women's specific front entry life vest, designed for paddling and sailing, includes the supportive Adjust-a-Bust system and large mesh pockets for organizing gear.  The sculpted racerback, six points of adjustment, and contoured chest panels offer excellent mobility and ultimate comfort.  Two zippered pockets keep your essentials secure, while two more allow easy access, and a clip keeps your keys onboard with you.  A tethered whistle and reflective trim along the front, back, and shoulders increase safety in low-light conditions.  Features: Front entry with zipper for convenient donning and doffing 200D nylon shell is soft and durable Women-specific fit has six points of adjustment Adjust-a-Bust fit system provides support and prevents riding-up Padded adjustable neoprene shoulders create all-day comfort Large zippered mesh pockets with a key clip keep personal items safe Reflective trim on the front, back, and shoulders enhances visibility in low-light conditions Tethered signal whistle for emergencies Certifications: U.S.C.G. - UL1123 - Marine Buoyant Devices 160.064 - Type III Technical Specifications: Color - Merlot/Grey Size - Small/Medium Chest Size - 29' to 40" (74 to 102 cm) Weight Capacity - ≥ 90 lb (≥ 41 kg) *Sold as an Individual  WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Hypro 9203P-S, Polypropylene Centrifugal Pump 1-1/2" NPT Inlet, 1-1/4" NPT Outlet. 7/8" Solid, 316 Stainless Steel Shaft. CCW Rotation 100 gpm, 82 psi.   Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs - filling nurse tanks, watering seed beds, and transferring liquids.   The broad, versatile line includes models with rugged housings of polypropylene that stand up to strong chemical herbicides. Polypropylene pumps are lightweight and provide excellent resistance to corrosive chemicals.

Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-1/2 Part # 0115-0064-0100 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-1/2 may have been modified to handle these chemicals.    March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 3 GPM 9 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ     230V 50/60HZ   Type Centrifugal Mag Drive Inlet 1/2"OD Outlet 1/2"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet   Part # 0115-0064-0100

Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-1/2 Part # 0115-0064-0200 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-1/2 may have been modified to handle these chemicals.    March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March AC-1A-MD-1/2 is suitable for your application, please contact March Pump.      Unit System 60Hz 50Hz Max Flow 3 GPM 9 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ       230V 50/60HZ   Type Centrifugal Mag Drive Inlet 1/2"OD Outlet 1/2"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet   Part # 0115-0064-0200

SikaBiresin® AP077 + BPO Cream Hardener - White - Quart Features: Gelcoat repair system Easy to apply – Easy to sand High heat-resistance of 400°F (209°C) Accepts virtually all types of finishes Low moisture absorption for above or below the waterline applications Minimal shrink or sink upon cure Bonds to epoxy, vinyl ester, polyester, and many substrates Quick-set cure and finishing time WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SikaBiresin® AP112 White Quart BPO Hardener Required SikaBiresin® AP112 is a fibrous filler that makes it very useful for increased bonding strength or for rebuilding broken or void areas in SMC, RIM, and other thermoset composites. It is a smooth thixotropic paste system that exhibits easy mixing and stable application qualities. It can be applied in varying degrees of thickness with minimal shrinkage and can be used for deeper surface composite repairs before final surfacing with a fairing compound. Features: Exceptional adhesion Quick setting Minimal shrinkage Usage: SikaBiresin® AP112 can be used in the following bonding applications: FRP composites to FRP, rebuilding broken areas, metal inserts to fiberglass, marine fabrication, metal to concrete, detail blocks to FRP, wood to wood bonding, and metal to metal bonding. Advantages: Exceptional adhesion Quick setting Minimal shrinkage No bleed out Excellent finishing and machinability Accept virtually all types of finishes Low moisture absorption High impact strength

SikaBiresin® AP014 White Base Quart Can BPO Hardener Required The brand SikaBiresin® represents specialized liquid resins based on polyurethane and epoxy. A part of this brand is dedicated to classic and advanced tooling and modeling applications. While other products are specialized in specific applications in the production industry.  From special layers and resins for air and medical filters, even crystal-clear products for art and decorating are part of this broad-reaching product brand. Specialized resins for encapsulation of electric and electronic parts as well as composite resins for lightweight design and production complete the portfolio. Versatile; fast-set, dimensionally stable; used for filling/fairing porosity & voids on composites’ surfaces Applications: Model and tool making Rapid prototyping External parts e.g. engine hoods Interior parts Lightweight wheels Benefits: Different resins available for different processes and requirements Highly experienced technical service support available for on-site systems implementation Resins and hardeners available in different container sizes

SikaBiresin® AP017 White Base Quart Can BPO Hardener Required The brand SikaBiresin® represents specialized liquid resins based on polyurethane and epoxy. A part of this brand is dedicated to classic and advanced tooling and modeling applications. While other products are specialized in specific applications in the production industry.  From special layers and resins for air and medical filters, even crystal-clear products for art and decorating are part of this broad-reaching product brand. Specialized resins for encapsulation of electric and electronic parts as well as composite resins for lightweight design and production complete the portfolio. Applications: Model and tool making Rapid prototyping External parts e.g. engine hoods Interior parts Lightweight wheels Benefits: Different resins available for different processes and requirements Highly experienced technical service support available for on-site systems implementation Resins and hardeners available in different container sizes