|
Stand-Up Swivel with Aluminum Cheeks
Delrin™ sheave ensures smooth operation and high safe working load.
Specifications:
Sheave Dia. 2" (51 mm)
Max Line 7/16" (11 mm)
Diameter includes urethane base 2-7/8" (73 mm)
Height 4-1/32" (103 mm)
H2 2-3/32" (54 mm)
Fastener Size (4), #10 RH (5 mm)
C/C 1-12/31" (36 mm)
SWL 1750 lbs. (790 kg)
Weight Alum. 7.0 oz. (198 g)
#97-48 BACKING PLATE SOLD SEPARATELY
|
159.00 |
|
|
Stand-Up Swivel - Aluminum Block
Specifications:
Sheave Dia. 2-2/8" (60 mm)
Max Line 1/2" (13 mm)
Diameter includes urethane base 3-3/8" (86 mm)
Height 4-25/32" (120 mm)
H2 2-15/32" (63 mm)
Fastener Size (4),1/4" RH (6 mm)
C/C 1-11/16" (43 mm)
SWL 2250 lbs (1020 kg)
Weight Alum. 11.7 oz. (332 g)
|
191.35 |
|
|
Series 40 Ball Bearing Orbit Block - Single - Stand-Up Swivel Head
Features:
Ultra Lightweight
Low friction 2-stage Orbital ball bearing system
Highest working load in its class
Low profile and compact
High performance cleating
Swivel shackle head for unlimited block rotation -grade 316 stainless steel.
Stainless steel shackle head for ultimate durability with harsh fixing points.
Lightweight
Kilogram for kilogram of working load, BB and RT Orbit Blocks™ are the world’s lightest. The unique orbital design allows the bearing to only be in the active areas of the floating sheave. This minimizes the mass of the inactive return race and hub.
Weight and bulk are further reduced in the different block configurations. The ball bearing single and becket block has a through-sheave becket arrangement. The result? The lowest weight possible.
Multi-sheave blocks have only single intermediate cheeks and an ultra-light and efficient head arrangement. This gives a 30% weight saving advantage over the nearest competitor. Other brands just link together their single blocks. This results in unnecessary double cheeks between each sheave, held together by a heavy steel channel across the top of the block.
Highest Working Load In It's Class
The orbital ball-bearing arrangement gives the largest possible bearing race diameter. This maximizes load performance. The proven Ronstan 2-stage bearing system features high compression grade acetal ball bearings and a secondary full-contact bearing. This gives minimum friction across the full working load range.
The floating sheave and bearing system is supported by a fiber-reinforced load frame. The design was computer modeled to be stress optimized.
Recommended fasteners - 2 x 4mm (5/32") countersunk head screws
Applications:
Mainsheet systems on spinnaker sheet on dinghies to 5m (16ft)
Spinnaker sheets on dinghies, sportsboats and small keel boats to 5m (16ft)
Halyard, vang and backstay applications on boats to 8m (26ft)
Control line applications on larger yachts
Materials:
Ball Bearings - High compression strength carbon black Acetal.
Stage 2 Bearing - Glass fiber reinforced, MoS2 impregnated Nylon
Frame/Cheeks - Toughened, glass fiber reinforced Nylon
Sheave - Carbon fiber reinforced, PTFE impregnated Nylon
|
35.98 |
|
|
Series 30 Ball Bearing Orbit Block™ - Stand Up Swivel
Ball Bearing Orbit Blocks™ boast the highest strength-to-weight ratio available. This is achieved through all-composite reinforced polymer materials and multiple attachment options.
Their precision design provides the optimum number of ball bearings for minimum friction while weight reduction is achieved through the use of fiber-reinforced composites in the block head, cleat arms and beckets.
Features:
Lightweight
Highest working load in its class
Secure, versatile and secure attachement
Low profile and compact
Applications:
Mainsheet systems and spinnaker sheets on dinghies to 5M(16')
Halyard, vang and backstay applications on boats to 5M(16')
Control line applications on larger yachts
Materials:
Sheave: High compression strength carbon black Acetal
Ball Bearings: High compression strength Acetal
Frame/Cheeks: Toughened, glass fiber reinforced Nylon
Link: UV stabilized, multi-strand impregnated SK75 Dyneema®
Specifications:
Sheave Ø: 30mm(1-3/16")
Max. Rope Ø: 8mm(5/16")
M.W.L.: 300kg(660lbs)
B. L.: 600kg(1,320lbs)
Weight: 33g(1.2oz)
|
22.25 |
|
|
Series 7 Flat Base/Aluminum Cheek/Delrin Sheave
Delrin™ sheave ensures smooth operation and high safe working load. Stainless steel base distributes loads to a large surface area.
Specifications:
Sheave Dia. 2-3/8" (60 mm)
Max. Line 1/2" (13 mm)
Length 4-3/8" (111 mm)
Width 2-3/4" (70 mm)
Height 1" (25 mm)
Fasteners (4) 1/4" RH (6 mm)
C/C 3-5/8" (92 mm)
C/C (wide end) 2" (51mm)
C/C (narrow end) 1-9/16"
SWL 2250 lbs. (1020 kg)
Weight Alum. 9.6 oz. (272 g)
|
109.43 |
|
|
16' Maori Giant Inflatable Stand-Up Paddleboard with Leash and 4 Paddles
16' x 50" x 6" Maori iSUP was designed as a way to share the joy of paddling with friends and family-accommodating 1-6 paddlers at one time. With over 1,000+lb capacity & an extremely wide frame, this iSUP is incredibly stable allowing your group to focus on teamwork and enjoying your time together on the water.
The Maori MEGA iSUP was designed as a way to share the joy of paddling with friends and family. Accommodating 2-6 paddlers, the board’s extremely wide frame makes the Maori incredibly stable, allowing your group to focus on teamwork and enjoying your time together on the water. When you’re done paddling, use it as a floating recreation platform to hang out on and relax together under the sun. Despite the paddleboard's grandiose nature, our state-of-the-art drop-stitch technology allows the Maori to compress down into a carry bag, ensuring that the party goes wherever you go.
EVA non-skid traction pad - The EVA non-Skid traction deck pad material allows for extra comfort while standing. In addition to the non-skid material, it's diamond-grooved texture creates increased grip while paddling.
Double-layer PVC material - The exterior construction is double-layered, 1000 Denier, 3-Ply PVC material. This premium grade material is highly durable, UV resistant & puncture resistant, and tough enough to withstand marine environments.
Drop-stitch core - Drop-Stitch Technology is constructed of thousands of polyester threads that connect the top and bottom PVC layers together. This allows for high-pressure inflation, creating that flat, board-like shape with a solid feel as you paddle.
Fabric-reinforced PVC rail - The rails of our inflatable SUPs are double-layered to ensure seam durability and toughness. This reinforced exterior layer is designed to absorb impact and protect the iSUP so you can confidently take your board anywhere.
Features:
Bungee system to store your PFD-life vests, dry bags, coolers, and other gear
Non-slip tract pad designed with ultra-cushioned, non-slip traction pad material
3 removable 9" skegs create seamless tracking
Double reinforced, UV-resistant D-ring attachment point for leash
Universal bow mounts to attach Go-Pros, speakers, cameras, cup holders, etc. Double pad-eye for anchoring, docking, and securing
13 reinforced soft neoprene comfort grip handles
Halkey-Roberts (HR) valve for inflating and deflating with push-pin function and screw cap
Technical Specifications:
Recommended pressure - 15 PSI
Backpack dimensions - 60" x 18" x 12"
Weight - 69 lbs
Weight Capacity - 1000+ lbs
In the Box:
SUP
Heavy-duty carry bag
(4) Adjustable paddles
Ankle leash
(3) Removable skegs
Pump with gauge
Repair kit
|
804.49 |
|
|
Series 45 Stand-Up Core Block - Swiveling
Core Blocks™ are a true all round solution. A tuned 2-stage bearing system provides excellent performance across the full working load range with an integrated thrust bearing feature and the resilience to handle high dynamic or static loads. Acetal sheave, alloy cheeks and stainless fixings complete the durable package. For reliability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.
Universal Bearing
Dynamic and high static load performance
The Ronstan Universal Bearing incorporates our proven 2-stage bearing system
Stage 1 - Under moderate loads, Acetal ball bearings ensure minimum friction
Stage 2 - Under heavy loads, where deformation of ball bearings alone would result in increased friction, a sliding Acetal bearing on a polished stainless steel race takes over, maintaining low friction performance
Additionally the ball bearings are configured to act as a thrust bearing between the sheave and cheeks, preventing the sheave from rubbing on the cheeks and causing friction when the line lead in and out of the block isn’t perfect. Particularly important for cheek blocks
Alloy Cheek Plates
Block cheeks are manufactured from the highest quality alloy for maximum strength. Material optimization and the cut-away design minimizes weight and allows easy fresh water rinsing of salt and debris from the bearings. Cheek design has been further styled with flaring at the block throat and reduced gap between the cheek and sheave, minimizing rope wear.
Features:
High dynamic and static load capacity
Efficient 2-stage bearing system
Ball bearings to counteract side thrust loads
Class leading performance and sleek, contemporary styling
Durable aluminium alloy cheek plates
Central hub hole can be used as a becket take-off or tie-up point
Features a strong cast padeye base with a swivel head post to allow full rotation and articulation
Applications:
Ideal for mainsheet, halyard and spinnaker sheet applications on boats to 10M (33')
Various control line applications on larger yachts
Alloy sheave models are available for use with wire
Materials:
Sheave: U.V. stabilised Acetal
Cheek body: Aluminium Alloy
Ball Bearings: High compression strength carbon black Acetal
Shackle, head post & hub: Grade 316 stainless steel
|
92.66 |
|
|
Series 7 Stand Up Ball Bearing Swivel Block - 2-3/8" 60mm
Single stand up ball bearing block. Stand up spring keeps block upright when not in use. Stainless steel base spreads load out and may be used with 97-49 backing plate. (sold separately) Delrin(tm) ball bearing sheave provides a low-friction high strength sheave. Sheave Dia. 2-2/8" (60 mm), Max Line 1/2" (13 mm), Dia. includes urethane base 3-3/8" (86 mm), Height 4-25/32" (120 mm), H2 2-15/32" (63 mm), Fastener Size (4),1/4" RH (6 mm), C/C 1-11/16" (43 mm), SWL 1700 lbs (771kg), Weight Alum. 11.7 oz (332 g).
|
198.43 |
|
|
Series 40 Orbit Single BB Single Stand-Up Block
The Series 40 ball-bearing Orbit Blocks™ provides the perfect balance of strength, performance, and reliability. They offer class-leading dynamic and static load ratings, the highest available in this size of performance blocks. Lightweight and strong toughened glass fiber reinforced nylon cheeks replace stainless steel straps used in traditional utility blocks - the perfect balance of performance and reliability.
As well as traditional single swivel blocks, the range includes single and double sheave lashing or soft attachment options through to multiple sheave blocks including those with quad and quin sheaves. The range is highly versatile allowing a multitude of possible systems right up to a 12:1 purchase mainsheet system for off-the-beach performance catamarans.
Series 40 Orbit Blocks™ are fitted with our carbon-reinforced C-Cleat™ for secure rope holding with low entry and exit efforts, and fairleads for fast action from any angle. Cleat arms are made from stainless steel and adjustable for setting your preferred cleating angle.
Ball Bearing versions incorporate our 2-stage bearing system using ball bearings to minimize friction and a secondary full-contact bearing to maintain low friction across the full working load range.
High Load versions are designed specifically for any application where high dynamic or static loads are expected. They feature a high-strength grade 2205 stainless steel sheave & hub together with a triple bearing race to maintain low friction at very high loads.
Features:
Class-leading dynamic and static load ratings
Lightweight, yet strong. Toughened, glass fiber reinforced nylon replaces stainless steel straps used in our traditional utility blocks
Low friction 2-stage ball bearing system for efficient and effortless trimming
Soft attachment, lashing, and traditional swivel shackle head options
Low profile and compact
High performance cleating
Applications
Mainsheet systems and spinnaker sheets on dinghies, off-the-beach catamarans and sportsboats to 8m (26ft)
Halyard, vang and backstay applications on boats to 9m (30ft)
Control line applications on larger yachts
Specifications:
Sheave Ø: 1-9/16 in.
Max. Rope Ø: 3/8 in.
M.W.L.: 880 lb.
B. L.: 1760 lb.
Weight: 2.5 oz.
|
36.00 |
|
|
Series 40 All Purpose Block - Single - Stand Up
All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required.
Features:
Exceptionally high working loads
Low maintenance, long service life
Self-lubricating sheave
Captive Lock™ universal head
Mount with 2 x 5mm (3/16") fasteners (not supplied)
Applications:
Mainsheet
Halyard
Vang
Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26')
Materials:
U.V. stabilized Acetal sheaves
Impact and U.V. resistant, fiber reinforced Nylon cheeks
Grade 316 stainless steel bearing race
Grade 316 stainless steel load strap and head fitting
Specifications:
Sheave Ø: 40mm(1-9/16")
Max. Rope Ø: 10mm(7/16")
M.W.L.: 400kg(880lbs)
B. L.: 800kg(1,760lbs)
Weight: 72g(2.5oz)
|
25.69 |
|
|
Series 40 Ball Bearing Block - Single - Stand Up
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required.
Features:
Low friction Acetal or Torlon® bearing system
Lightweight
Cheek cut-outs for easy bearing maintenance
Captive Lock™ universal head
High static and dynamic load capacity
Applications:
Mainsheet
Halyard
Vang
Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26')
Materials:
U.V. Stabilized Acetal sheaves
Acetal ball bearings
Impact and U.V. resistant, fiber reinforced Nylon cheeks
Grade 316 stainless steel load strap and head fitting
Specifications:
Sheave Ø: 40mm(1-9/16")
Max. Rope Ø: 10mm(7/16")
M.W.L.: 350kg(770lbs)
B. L.: 800kg(1,7600lbs)
Weight: 71g(2.5oz)
|
31.68 |
|
|
Series 50 All Purpose Block - Single Stand Up
Features:
Exceptionally high working loads
Low maintenance, long service life
Self-lubricating Acetal polymer sheave ensures low friction and extreme durability
Captive Lock™ universal head
Slotted pin shackle eliminates fouled lines
Mount with 2 x 5mm (3/6") fasteners (not supplied)
All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required. Quick adjusting cleat arms require no tools to adjust and fix securely in position. Becket pin is removable so line can be spliced prior to fitting.
Applications:
Mainsheet and halyard applications, vang and spinnaker control lines on boats to 10m (33ft)
S60 - on boats up to 12m (40ft)
Typically used in direct 4:1 purchase systems such as mainsheets and boom vangs
On larger boats they are used for fine-tune mainsheet tackles, outhauls, cunninghams, checkstays, genoa lead pullers and traveller controls.
Materials:
Grade 316 stainless steel load strap
Impact and UV resistant, fiber reinforced Nylon cheeks
|
36.82 |
|
|
Spring Loaded/Lined Slide/Aluminum for 1" T-Track
Delrin™ sheave ensures smooth operation and high safe working load. Anodized aluminum cheeks and stainless steel slider ensure reliability. Polyethylene liner and pin stop allow for easy adjustment.
Specifications:
Track Size 1" x 1/8" (25 mm x 3 mm)
Max. Boat Length- 27' (8m)
Max. Boat Weight- 5000 lbs. (2270 kgs)
Sail Area- 315 sq. ft (29 m2)
Sheave Diameter 2" (51 mm)
Max Line 7/16" (11 mm)
Length 3" (76 mm)
Width 1-1/4" (31 mm)
Height 4-5/32" (105 mm)
Bearing Height 2-7/32" (56 mm)
SWL 1750 lbs. (795 kg)
Weight 7.0 oz. (198 g)
|
184.27 |
|
|
Spring Loaded/Lined Slide/Aluminum for 1-1/4" T-Track
Delrin™ sheave ensures smooth operation and high safe working load. Anodized aluminum cheeks and stainless steel slider ensure reliability. Polyethylene liner and pin stop allow for easy adjustment.
Specifications:
Track Size 1-1/4" x 3/16" (32 mm x 5 mm)
Max. Boat Length 33' (10 m)
Max. Boat Weight 12000 lbs. (5455 kg)
Max. Sail Area 520 sq. ft. (48 m2)
Sheave Diameter 2-3/8" (60 mm)
Max Line 1/2" (12 mm)
Length 4" (102 mm)
Width 1-9/16" (39 mm)
Height 4-15/16" (126 mm)
Bearing Height 2-3/8" (67 mm)
SWL 2250 lbs. (1020 kg)
Weight 12 oz. (340 g)
|
246.07 |
|
|
Power-Rise Adjustable Stand-Up Post - Stainless Steel
Stainless Steel Pedestal, Adjusts From 22-1/2″ to 29-1/2″ Use As Seat Or Leaning Post. 3 Degree Tilt Cast Aluminum Swivel, Rotates 360°. Use With Any Non-Locking Spring-Lock™ Base (sold separately).
Rated ABYC Class H-31 B (Fishing Only)
|
155.39 |
|