|
15" Great Hawk
For boats from 8m to 20m
The Great Hawk is designed for Cruising and Racing yachts up to 20m. The Great Hawk vane arm is made from the same super tough nylon and the Reference Arms are made from glassed filled nylon for ultimate rigidity and UV protection. The precision balanced vane arm and Hawks "V" Jewel bearing surface gives instant response to shifts and gusts with minimal inertia. The Reference Arms may be preset at 55, 60 or 65 degrees or any angle you prefer and can be used for either upwind or downwind angles. The 5mm Aluminum support rod is strong enough to take normal wear and tear, but can be bent straight should it be knocked while the mast is being stepped or unstopped. The Great Hawk is easily removed from its mounting bracket with one screw and the mast bracket can be mounted vertically or horizontally.
Specifications:
Vane Arm length 38cm (15")
Overall height 29cm (11.4")
Overall weight 70 grams.
|
77.35 |
|
|
Hawk Wind Indicator for Boats up to 8M - 10"
The Hawk is the original Hawk Wind Indicator and sets the standard by which all Wind Indicators are judged. Lightweight with a balanced vane arm and the Hawk "V" jewel bearing surface this is the ultimate in Wind Indicator technology. The Vane arm is made from tough Nylon giving good rigidity and UV Protection. The support rod is high grade aluminum allowing it to be bent if required or straightened should it be knocked or damaged. The easily removable mast clip can be mounted either vertically or horizontally and is easily removed without tools. Adjust and lock the reference arms at any angle for quick, at a glance indication or either gybing or tacking angles.
Specifications:
Vane Arm Length 27cm (10.6")
Overall Height 28cm (11")
Overall Weight 25 grams
|
50.62 |
|
|
Cat Hawk Wind Indicator for Non-Spin Catamarans up to 8M
The Cat Hawk is designed for non-spinnaker Catamarans up to 8m. It has been developed to mount onto the front of the Forestay Bridle where it is ideally situated for maximum visibility both upwind and downwind. The Cat Hawk uses the same Vane Arm as the Hawk with all the benefits of Balance, "V" Jewel bearing, weight and UV Protection that it brings. The reference arms can be set for either upwind or downwind angles. The Support Rod is aluminum and has the Hawk quick mount clip for quick rigging and de-rigging.
Specifications:
Vane Arm length 25cm (9.8")
Weight 30 grams
|
63.12 |
|
|
Little Hawk Race Wind Indicator for Boats up to 8M
The Little Hawk Race takes the ever popular Mk 1 Wind Indicator, cuts it to a minimal length and provides with a robust and lightweight mounting system. This gives the customer the lightest, least drag Wind Indicator on the market today. With its UV protection there will be no degradation in performance for many years. Ideal for all racing boats up to 8m. The mast clamp is screwed into the mast with two self-tapping screws (included). The Little Hawk Race is then pushed into place or removed easily.
Specifications:
Vane Arm length 16.5cm (6.5")
Height 14cm (5.5")
Weight 14 grams
|
30.43 |
|
|
Little Hawk MK 1
For Dinghies up to 6m
The Little Hawk Mk1 is a small, lightweight and robust Wind Indicator designed to be positioned at the top of the mast on dinghies up to 6m. Very popular with Optimists, the Little Hawk Mk1 is also ideal for any dinghy that wants accurate wind direction information with minimal weight and drag. The Vane Arm is made of super tough nylon is all but indestructible. The aluminum rod can be easily straightened if damaged or easily bent to any required angle. The whole unit is easily assembled straight from the box.
Specifications:
Vane Arm Length 16.5cm
Height 28cm
Weight 16 grams.
|
23.54 |
|
|
Little Hawk Mk 2 Wind Indicator
The Little Hawk Mk 2 brings all of the benefits of the Little Hawk Mk 1 Wind Indicator and mounts it in a secure manor at gooseneck height in front of the mast. Designed for smaller single handed Dinghies, the Little Hawk Mk 2 allows quick and accurate reference to wind direction without having to look at the top of the mast. Ideal for upwind and downwind reference. The Little Hawk Mk 2 is easily mounted and removed with a secure adjustable bracket. The aluminum support rod can be bent to any required angle, but is easily straightened if accidentally knocked. The complete unit removes for safe storage without any tools. The Little Hawk Mk 2 is very popular with Laser sailors.
Specifications:
Vane Arm length 16.5cm (6.5")
Overall height 19cm (7.5")
Weight 28 grams
|
34.00 |
|
|
Hawk Race for Single Handed Racing Dinghies
The Hawk Race brings all the benefits of the Hawk Wind indicator with it's "V" jewel bearing and balanced vane arm. Mounts in a secure manor at gooseneck height in front of the mast. Designed primarily for larger single-handed Dinghies, the Hawk Race allows quick and accurate reference to wind direction without having to look at the top of the mast. Ideal for both upwind and downwind reference. The Hawk Race is easily mounted and removed with a secure adjustable bracket. The aluminum support rod is easily bent to any angle required, but easily straightened if accidentally knocked.
Specifications:
Vane Arm length 27cm (10.6")
Weight 32 grams
|
54.74 |
|
|
Winterizing Your Boat
When the boating season is winding down, it's time to start thinking about protecting your valuable recreational asset. The time and effort you spend now will have a definite effect on your boat's performance, or lack of it, and certainly save you time, effort and money come spring. You should remember that your insurance policy may not cover damage done by lack of maintenance or neglect.
The best place for your boat to be during the winter is out of the water, under cover, in a climate-controlled boat storage area. This, however, can be expensive. If don't have this option perhaps you should consider shrink-wrapping your boat. This, too, is a little expensive but provides a very protective cover. Short of these two items, make sure that your boat is well covered with a tarp or some other sturdy cover.
Your first step in winterizing should be to make a checklist of all items that need to be accomplished. Check the owner's manual of both your boat and motor for manufacturer's recommendations on winterization. If you are a new boat owner, perhaps you should employ the assistance of a friend with experience in winterizing or hire a professional to do the job.
CLR Marine sells the winterizing products you will need for winter storage and regular maintence of your boat.
Specials Closeouts Remanufactured Rebates
|
|
|
The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope.
Maximum Pull: 660lbs.
Providing most of the features of the larger RC8, the RC6 has been designed with the smaller, trailer boat market in mind.
The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the DIY aftermarket customer.
An inexpensive, high performance and great looking windlass: the RC6 is built for durability and years of trouble free use.
The RC6 is available only as a low profile unit (no optional capstan drum).
Kits include:windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle.
|
870.76 |
|
|
XLT 7.0 Powered Marine Winch w/Remote f/Boats up to 20'
Features:
For boats up to 20'
MAX. boat weight 7,000lbs
Convenient wireless remote included
Rugged strap includes swiveling hook to prevent strap twisting
Power in / Power out and free spool
Manual override using standard tools in case of power loss
3-position guide so strap comes out stright
Corrosion resistant
Easy to access light and winch control switches
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
491.82 |
|
|
XLT 10.0 Powered Marine Winch w/Remote f/Boats up to 26'
Features:
For boats up to 26'
MAX. boat weight 10,000lbs
Convenient wireless remote included
Rugged strap includes swiveling hook to prevent strap twisting
Power in / Power out and free spool
Manual override using standard tools in case of power loss
3-position guide so strap comes out stright
Corrosion resistant
Easy to access light and winch control switches
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
533.71 |
|
|
6 x 9 ft. Black Sun Shade for Boats Up To 28'
Sebba Shade stands out with its versatile design, providing a large coverage area and multiple positioning capabilities. This lightweight and easy-to-use shading solution not only offers convenience but also surprises with its unexpected functionality—it doubles as a floatie, making it an ideal companion for various outdoor activities.
Inflatable: Easy setup/take down.
Portable: Used only when needed and comes with easy storage.
Air Frame: Uses a high-pressure airframe instead of a metal frame.
Easy Usage: No permanent hardware or professional installation is required.
Quality: High quality, durable construction. Blocks 98% of harmful UVA/UVB rays.
Risk-Free: Try for 30 days, and return it for a full refund if not satisfied.
Pump Sold Separately: Works with any high PSI (above 7-8 PSI) pump, such as a "kiteboarding pump" or a "stand-up paddleboard pump."
Features:
Mildew-resistant, abrasion-resistant, tear-resistant marine-grade fabric
Easily moved or tilted to block the sun
Easy set up (no poles, no drilling needed)
Straps & clips included
Inflates in 2 minutes with a standard standup paddleboard (SUP) style pump (not included)
Fasten to an existing T-top, arch, or bimini
Specifications:
Color: Black
Fits: Boats from 17 ft to 28 ft
Dimensions Inflated: 6’-4” x 9’-4”
Dimensions Deflated: 22” x 8” x 12”
Weight: 11 lbs.
Max Speed: Safely handles speeds up to 45 mph
|
990.00 |
|
|
Type A Controller f/Boats with an Existing Autopliot
No need for additional drive units. The Intellisteer Wireless Controller is designed to be wired between a Course Computer and Autopilot Drive
When the Intellisteer Wireless Controller is activated it will disconnect the autopilot and provide wireless jog steering control from anywhere on the boat
When the Intellisteer Wireless Controller is turned off, the Autopilot will function as before
|
150.46 |
|
|
5' Boat Bumper
FATSAC Bumpers are a great way to protect your boat from any scratches, dents, or dings during boat tie-ups, lake parties, or when pulling your boat up to a dock to gas up. They can also be hung from your dock to protect your boat when pulling back up whether to pick up more friends or grab more gear!
Features:
5’ feet long x 20” diameter
UV-resistant material and ink.
Made from the same durable high strength material as our Fat Sacs.
Seams are welded and taped for extra durability
Includes 2 of the 5’ foot rope extensions, to be used on each tie-down cleat (1 on each end), to hang the bumper.
Bumpers are inflated through the Halkey-Roberts air valve fitting. FatSac air pumps work best to fill the bumpers, however, bumpers can be filled with any air pump.
FatSac Bumpers can be hung off the side of a boat or the side of a dock. IMPORTANT – After filling, ensure the air-fitting cap is screwed on tight to keep air from leaking out.
Hang the FatSac Bumper using the cleats on each end. Bumpers should sit on the water or slightly above to prevent a collision.
*FatSac Bumpers are to be used only for boat tie-ups and docks. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!
|
190.36 |
|
|
15' Boat Bumper
FATSAC Bumpers are a great way to protect your boat from any scratches, dents, or dings during boat tie-ups, lake parties, or when pulling your boat up to a dock to gas up. They can also be hung from your dock to protect your boat when pulling back up whether to pick up more friends or grab more gear!
Features:
15’ feet long x 20” diameter
UV-resistant material and ink.
Made from the same durable high strength material as our Fat Sacs.
Seams are welded and taped for extra durability
Includes 2 of the 5’ foot rope extensions, to be used on each tie-down cleat (1 on each end), to hang the bumper.
Bumpers are inflated through the Halkey-Roberts air valve fitting. FatSac air pumps work best to fill the bumpers, however, bumpers can be filled with any air pump.
FatSac Bumpers can be hung off the side of a boat or the side of a dock. IMPORTANT – After filling, ensure the air-fitting cap is screwed on tight to keep air from leaking out.
Hang the FatSac Bumper using the cleats on each end. Bumpers should sit on the water or slightly above to prevent a collision.
*FatSac Bumpers are to be used only for boat tie-ups and docks. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!
|
263.26 |
|