SA-866 Photoelectric Smoke Detector Replace your smoke alarms that are over ten years old.  Features: Photoelectric Smoke Alarm Sealed-In Lithium Battery - no replacement needed! For Marine Use Low Battery Indication (audible & visual) Built-in Test/Hush Functions Always On - Sealed-In Power Supply Easy Push - Test/Hush Button Conforms to UL 217-RV Meets US Coast Guard and ABYC A-24 Standards for Marine Smoke Alarms

Safe-T-Alert Safe-T-Alert, a part of MTI Industries, Inc., carries products for the RV Industry, the Marine Boating Industry and even for your Home. Check out products to keep you safe such as Carbon Monoxide Alarms, Dual Alarms, Gas Fume, Fire and Bilge Water Alarms, Heat Sensors, Propane LP Gas Alarms, Smoke Detectors, High Water Float Switches, Replacement Sensors. 

SA-339 White RV Battery Powered CO2 Detector Features: Easy to install Battery Powered Color: White Ideal for RVs Sensor detects Carbon Monoxide Gas

SA-340 Black RV Battery Powered CO Detector - Rectangle Features: Sealed-In Lithium Battery - No Replacement Needed!  5-Year Battery Replaces Battery Powered RV Listed CO Alarms Long 5 Year Battery Life  Easy Installation Low Battery Indication Built-In Test/Hush Functions Approved. Meets RVIA/NFPA requirements End of Life Signal. Provides audible confirmation when alarm needs to be replaced, with 30 day override (see owner’s manual). Replacement date is 60 months (5 years) after pulling battery tab  Conforms To ANSI / UL STD 2034

SA-340 White RV Battery Powered CO2 Detector - Rectangle Features: Sealed-In Lithium Battery - No Replacement Needed!  5-Year Battery Replaces Battery Powered RV Listed CO Alarms Long 5 Year Battery Life  Easy Installation Low Battery Indication Built-In Test/Hush Functions Approved. Meets RVIA/NFPA requirements End of Life Signal. Provides audible confirmation when alarm needs to be replaced, with 30 day override (see owner’s manual). Replacement date is 60 months (5 years) after pulling battery tab  Conforms To ANSI / UL STD 2034

Optical Smoke Detector with Base Optical smoke detectors have consistently been recognized as suitable detectors for general use. They are regarded as particularly suitable for smoldering fires and escape routes. This smoke detector is also designed to significantly reduce the incidence of false alarms through over-sensitivity to transient phenomena. Features: Recommended for use as general-purpose smoke detectors for early warning of fires in most areas Works well in black as well as in white smoke Compensation for slow changes in sensitivity Extra confirmation of smoke before an alarm signal is given Specifications: Sampling Frequency: Once every four seconds  Operating Voltage: 8.5 V dc to 33 V dc  Supply Wiring: Two wire supply, polarity sensitive  Power-up Time: < 20 seconds  Minimum ‘Detector Active’ Voltage: 6 V Minimum Holding Current: 8 mA  Minimum Voltage to Light Alarm LED: 5 V  Alarm Reset Time: One second  Alarm Indicator: Integral indicator with 360º visibility  Operating & Storage Temperature: -40ºC to +70ºC Humidity (no condensation or icing): 0% to 98% RH Operation: Optical Smoke Detectors work on the well-established light scatter principle The remarkable optical design of this Smoke Detector enables it to respond to a wide spectrum of fires The sensing chamber contains an optical sensor that measures back-scattered light as well as the more usual forward-scattered light  The detector is calibrated so that it is highly reliable in detecting fires but is much less likely to generate false alarms The stability of the detector-high reliability, low false alarm rate is further increased by the use of algorithms to decide when the detector should change to the alarm state  Removes the likelihood of a detector producing an alarm as a result of smoke from smoking materials or another non-fire source

Wireless Smoke Detector This product senses small particles in the air using a couple of different kinds of technologies. Once those particles are above a certain threshold, the unit will signal the alarm and begin sending system alert messages via text and email to the users.

FG-250RV Smoke Detector - 9V Battery Powered BRK Model FG-250RV is a single-station smoke alarm specifically designed for RV, residential and institutional applications including sleeping rooms in hospitals, hotels, motels, dormitories, and other multifamily dwellings. Features: Dual Ionization sensing chamber – Generally more effective at detecting small particles produced by flaming fires, such as paper or kitchen grease 85 dB alarm horn at 10 feet 9V battery included Full function test switch  Silence feature to silence unwanted nuisance alarms  Red LED light that indicates DC power or alarm  Tamper-resistant locking pin that locks alarm cover to prevent removal of the battery  Approved for RV use but can be used in apartment, dor­mitory or hotel applications The compact, low-profile design complements any decor Dimensions:  Diameter: (inch) 4.25″ Height: (inch) 1.6″

Marine Gas Fume Detector Provides protection against accidents caused by Gas/Propane spills or leaks. The remote sensor monitors the bilge/engine compartment during and after fueling. Install the galley or LP tank locker sensor to protect against propane leaks. Features: Sight and Sound Alarm Indicator Dual signaling sounds an alarm and activates a warning light Marine Proven Exclusively designed for the harsh marine environment Smart Sensor Detects the build-up of explosive gases On/Off/Test For a one-touch analysis of detector performance Money Saving Qualify for marine insurance discounts

65 Series Marine Carbon Monoxide Alarm 12V - Surface Mount - White Features: NMMA Listed Component Meets ABYC A-24 Standard - CARBON MONOXIDE DETECTION SYSTEMS Listed to UL 2034 Carbon Monoxide Alarms – Marine Use Meets ISO: 12133 Small craft - Carbon Monoxide (CO) detection systems Works in extreme temperatures - Only marine CO alarm listed to operational temperatures of -40° F to 158° F. Alarm has consistently held up in the excessive cold and heat due to high quality sensor No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating Low Current Draw. Innovative micro current circuit saves battery power for the boater. 60 milliamp (.06 amp.) current draw Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. Alarm will reactivate if it still senses dangerous levels of CO End of Life Signal alerts boater to replace the alarm after 5 years of service Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory

65 Series Marine Carbon Monoxide Alarm - Flush Mount - 12V - White Features: NMMA Listed Component Meets ABYC A-24 Standard - CARBON MONOXIDE DETECTION SYSTEMS Listed to UL 2034 Carbon Monoxide Alarms – Marine Use Meets ISO: 12133 Small craft - Carbon Monoxide (CO) detection systems Works in extreme temperatures - Only marine CO alarm listed to operational temperatures of -40° F to 158° F. Alarm has consistently held up in the excessive cold and heat due to high quality sensor No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating Low Current Draw. Innovative micro current circuit saves battery power for the boater. 60 milliamp (.06 amp.) current draw Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. Alarm will reactivate if it still senses dangerous levels of CO End of Life Signal alerts boater to replace the alarm after 5 years of service Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory

62 Series RV Carbon Monoxide - White - Flush Mount - 12V with Trim Ring Features: This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts. NMMA Listed Component. Space Saving design works in harsh marine environments. Works in extreme temperatures. Only CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor. No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available. Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater. Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO. End of Life Signal alerts boater to replace the alarm after 5 years of service. Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory. The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain. Specifications: Conforms To ANSI / UL STD 2034* * Testing Laboratory: ETL/Intertek Alarm Point: 400 PPM 4-15 Minutes Low voltage power warning at 7 Volts Power Supply and Current Draw: 37 mA @ 13.8 VDC Operational Range: 13.8 Volts +/-15% Low voltage power warning at 7 Volts Operating Temperature: -40°F to +158°F Case Size: 4.5″W x 3.25″H x 1.25″D

62 Series Marine Carbon Monoxide - Flush Mount - White - 12V with Trim Ring Features: This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts. NMMA Listed Component. Space Saving design works in harsh marine environments. Works in extreme temperatures. Only marine CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor. No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available. Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater. Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO. End of Life Signal alerts boater to replace the alarm after 5 years of service. Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory. The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain. Specifications: Conforms To ANSI / UL STD 2034* * Testing Laboratory: ETL/Intertek Alarm Point: 400 PPM 4-15 Minutes Low voltage power warning at 7 Volts Power Supply and Current Draw: 37 mA @ 13.8 VDC Operational Range: 13.8 Volts +/-15% Low voltage power warning at 7 Volts Operating Temperature: -40°F to +158°F Case Size: 4.5″W x 3.25″H x 1.25″D

62 Series Carbon Monoxide Alarm - 12V - 62-541-Marine Surface Mount - White Mini Carbon Monoxide Alarm with a compact space saving design that replaces your CO alarms that are over 5 years old! Features: Space Saving. Compact design for boats Designed for the harsh marine environment No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating Advanced Technology - Alarm Mute button silences alarm while boat is ventilated Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain Reliable - 12 Volt power means no missing or dead batteries to replace Memory Scan™ - Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless your detector has memory Micro Current Technology - Saves precious battery power in a boat 62-541-R-Marine and 62-542-R-Marine include normally closed relay Use to turn on exhaust fans, remote horns/lights/signals or connect to alarms systems Listed to UL 2034 Marine Use and CSA 6.19-01

62 Series Carbon Monoxide Alarm w/Relay - 12V - 62-541-Marine-RLY-NC - Surface Mount - White Mini Carbon Monoxide Alarm with a compact space saving design that replaces your CO alarms that are over 5 years old! The 62-541-Marine-PLY-NC includes a normally closed relay. Used to turn on exhaust fans, remotes, horns, lights, signals or connect to alarm systems. Features: Space Saving. Compact design for boats Designed for the harsh marine environment No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating Advanced Technology - Alarm Mute button silences alarm while boat is ventilated Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain Reliable - 12 Volt power means no missing or dead batteries to replace Memory Scan™- Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless your detector has memory Micro Current Technology - Saves precious battery power in a boat 62-541-R-Marine and 62-542-R-Marine include normally closed relay Use to turn on exhaust fans, remote horns/lights/signals or connect to alarms systems Listed to UL 2034 Marine Use and CSA 6.19-01