|
Elastomeric Marine Sealant - 10oz Cartridge - White
A one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.
WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.28 |
|
|
Elastomeric Marine Sealant - 10oz Cartridge - Black
A one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.
WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.28 |
|
|
Elastomeric Marine Sealant - 10oz Cartridge - Clear
A one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.
WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.28 |
|
|
Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - White
Sikaflex®-291 is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. Used by many boat builders, its fast cure time makes it ideal for applications where speed is important.
Uses:
General all-purpose, marine adhesive and sealant, which may be used for light duty bonding. Sikaflex®-291 has excellent adhesion to gelcoat, fiberglass, metal and wood that can be gunned or brushed into place.
Characteristics & Advantages:
Use above and below water lineResists salt water
Fast strength build-up
Paintable and sandable
Excellent bond
NSF approved for potable water (black and white only)
USDA approved for incidental food contact
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.56 |
|
|
Sikaflex® 291 LOT Slow Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - White
Sikaflex®-291 LOT is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. It is a moisture cured, non-sag system designed with a long open time for jobs that require more time.
Uses:
General all-purpose, high strength marine sealant, which may be used for light duty bonding with long open time capability for humid climates or jobs requiring more time that remain permanently elastic.
Characteristics & Advantages:
Use above and below water line
Resists salt water
Paintable and sandable
Excellent bond
NSF approved for potable water
USDA approved for incidental food contact
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.56 |
|
|
Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz (300ml) Cartridge - White
Sikaflex®-221 is a high-quality multi-purpose non-sag 1-c polyurethane sealant/adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types Sikaflex®-221 is tested and classified in accordance with ANSI/UL 723 “Test for Surface Burning Characteristics of Building Materials”.
Uses:
Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are wood, metals, metal primers and paint coatings (2-c systems), ceramic materials, and plastics.
Features:
Highly elastic and durable
Resistant to aging and weathering exposure
Non-corrosive
Can be sanded and overpainted
NSF registered, Proprietary Substances and Nonfood Compounds (black, grey, and white)
UL listed for potable water (black, grey, and white)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.60 |
|
|
Sikaflex® 521UV UV Resistant LM Polyurethane Sealant - 10.3oz(300ml) Cartridge - White
Sikaflex®-521 UV is a multi-purpose, UV resistant, non-sag, elastic, one-part silane-terminated polymer sealant, which cures on exposure to atmospheric moisture to form a durable elastomer. Sikaflex-521 UV is solvent and isocyanate free.
Uses:
Sikaflex®-521 UV bonds well to a wide variety of substrates without the need for special pre-treatment and is suitable for making permanent, high strength elastic seals. Compatible substrate materials include wood, metals, (particularly aluminum including anodized components), sheet steels (including phosphated, chromated and zinc-plated components), metal primers and paint coatings (two-part systems), ceramic materials, plastics and glass.
Characteristics & Advantages:
Very low VOC/solvent free
Silicone and PVC-free
Isocyanate-free
High electrical resistance
Resistant to aging and weathering
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.29 |
|
|
Silicone Rubber Sealant Cartridge - White
An all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure. Acid free cure will not corrode metal.
|
18.40 |
|
|
LifeSeal® Sealant Cartridge - White
A unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free.
|
22.19 |
|
|
Scanstrut is an international leader in the design and manufacture of outdoor and marine equipment. Renowned around the globe for its strict product testing, all mounts, chargers, and seals meet the highest and most demanding set of performance standards.
The Scanstrut PowerTower has been designed and engineered to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
Designed to fit the most up to date radars from Garmin, Lowrance, Raymarine, Simrad, and Furuno
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower
No need to cut the radar’s connectors off for installation
Marine sealant not required
Available in 2 heights
Available in Aft or Forward leaning designs
Range of accessories light bars can be bolted to the back of the PowerTower
Securely holds and wirelessly charges your phone even in the toughest conditions. Now you can keep your phone in reach, fully charged, and ready to go.
12/24V
100% Waterproof
Mount & charge
One-handed operation
Works with wireless charging enabled phones of all sizes
Works through non-metallic, waterproof cases
Scanstrut's range of cabling solutions eliminates time-consuming, sub-standard routing of cables and messy sealant to achieve a 100% watertight installation for your marine cables every time.
IPX68 waterproof range
Easy fit cable routing that cuts down your installation time.
A guaranteed 100% watertight seal
Marine sealant not required
Specials Closeouts Remanufactured Rebates
|
|
|
Life-Calk Cartridge - White
A long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline, and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces.
*Not compatible with all paints, Sikkens, Cetol, Deks, Olje
WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.99 |
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
16 AWG Gauge Striped Marine Wire 500' Spool - White with Red Stripe
Striped wire is great for situations where someone is dealing with a large number of wires. Using striped wire makes identification easier. This, in turn, can increase job efficiency. All of Pacer's 16 AWG striped marine wire is manufactured in Sarasota, FL, USA, from Type III Class K tinned copper. During the production process, the copper conductors are jacketed with PVC insulation. This jacket is designed to be durable and flexible. All of Pacer's primary striped wire meets the requirements and standards of UL, ABYC, and NMMA.
How many options of 16 AWG striped marine wire does Pacer offer? The most important thing when selecting the proper striped wire is choice. By offering an enormous section, users are guaranteed to find the perfect choice. Currently, there are over 100 possible combinations of 16 AWG striped marine wires. Have a question about striped marine wire? Contact a Pacer expert today. This particular white marine wire has a red stripe and comes in a 500 ft. spool.
Features:
Stranded, tinned copper conductors
Highly flexible color-coded insulation
Annealed Finely Stranded Tinned Copper ASTM b172 Class K
Resistant to: Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture
Specifications:
Spool Length: 500 ft.
Insulation: -20 degrees C to 105 degrees C Flexible, Color Coded PVC
Temperature Rating: 105 degrees C Dry, 75 degrees C Wet, 60 degrees C Oil
Voltage Rating: 600-V
Applications:
Point-to-point wiring
Internal wiring of panels and motors
Compliances:
UL Standard 1426 (BC-5W2)
AWM 1015/1230
AWM 1028/1231
MTW, CSA: TEW
ABYC: E-8.14, E-9.14, Coast Guard: 33 CFR part183
|
74.77 |
|
|
10" Marine RGB Passive Subwoofer - White Stadium Series
Features:
10" Marine RGB Passive Subwoofer
White Grill
Stadium Series
300 Watts RMS
900 Watts Peak
RGB lighting in the bezel and in the cone
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
309.59 |
|
|
14 AWG Gauge Striped Marine Wire 500' Spool - White with Red Stripe
Striped wire is perfect for situations involving a large number of wires. Using 14 AWG striped marine wire makes the identification process easier which increases job efficiency. All of Pacer's primary wire is constructed in Sarasota FL, USA from Type III Class K tinned copper. During the manufacturing process, the copper conductors are jacketed with PVC insulation. This insulation is specifically designed to be durable and flexible. All of Pacer's primary striped wire meets the standards and requirements of UL, ABYC, and NMMA. How many possible combinations of 14 AWG striped marine wire does Pacer offer? Choice is everything and Pacer has gone out of the way to offer just that. By offering a variety of options, you are guaranteed to find the combination you are looking for. Pacer offers over 100 possible combinations for 14 AWG striped marine wire. Have a question about striped marine wire? Contact a Pacer expert today.
Features:
Stranded, Tinned copper conductors
Highly flexible color-coded insulation
Annealed Finely Stranded Tinned Copper ASTM b172 Class K
Resistant to: Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture
Specifications:
Insulation: -20 °C to 105 °C Flexible, Color Coded PVC
Temperature Rating: 105 °C Dry, 75 °C Wet, 60 °C Oil
Voltage Rating: 600-V
Applications:
Point-to-point wiring
Internal wiring of panels and motors
Compliances:
UL Standard 1426 (BC-5W2)
AWM 1015/1230
AWM 1028/1231
MTW, CSA: TEW
ABYC: E-8.14, E-9.14, Coast Guard: 33 CFR part183
|
107.30 |
|