|
SUPGRIP Suction Cup Carry Handle for SUPs
Comfortably carry your board with SUPGRIP. This portable handle suctions onto your paddle board for easy transport. Powerful dual locking suction cups can be mounted in any direction. Easy to install and removes with the flip of a leaver – no tools required. Floats when dropped in water.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.63 |
|
|
RAM Dual Articulating Suction Cup Base with 1" Ball Base
RAM Suction Cups are regarded as one of the most impressive suction cups in the world. Their incredible holding power is surprising when considering how most suction cups function. When two suction cups are used together the performance is amazing. The RAM Dual Articulating Suction Cup is an amazing innovation in suction cup mounting. With the ability to independently articulate each suction cup, this mounting base can be used in a variety of applications such as curved windows and surfaces. Whether you are mounting to a curved surface on a vehicle, or a curved windshield, this product is the ideal solution for secure suction cup mounting.
Features:
Customize mounting position for convex and concave surfaces by repositioning suction cup bases
Dual suction cups provide extra strength and stability for devices up to 5 lbs.
Commercial grade product for unparalleled performance
Dual suction cups for redundancy
High strength materials maximize longevity of the mount
Ball and socket mounting system offers ease of adjustment product adjustment
Lifetime warranty
Made in U.S.A.
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
50.26 |
|
|
Straight Double Suction Cup Base
RAM suction cups are regarded as one of the most impressive suction cups in the world. The incredible holding power is surprising when considering how most suction cups function. When two suction cups are used together the performance is amazing. The RAM Straight Double Suction Cup Base is an amazing innovation in suction cup mounting.
Features:
Straight
Double Suction Cup Base
Dual Suction Cups provide extra strength and stability
Dual Suction Cups for redundancy
High strength materials maximize longevity of the mount
Made in the U.S.A.
|
23.64 |
|
|
Plastic Suction Cup Handle
Injection Molded Nylon/Nitrile-Buna Rubber
Portable, dual suction cup handle installs instantly. Mounts in any direction on any non-porous surface. Easily mount and re-mount with no marks or damage to hull. No holes, screws, or tools required. Ideal for cleaning waterlines or boat bottoms while swimming or from a dinghy. Attach to your paddleboard or kayak for an extra handle during transport. For use above or below the waterline. Constructed of non-corrosive injection molded nylon and Nitrile-Buna rubber. Designed to assist grip not to leverage full body weight.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.50 |
|
|
Twist-Lock™ Suction Cup Mount with EZY-Mount™ Quick Release Adapter
This single suction cup mount (RAM-B-166-326U) was designed in collaboration with OtterBox Hardline Series for industrial applications. This kit includes a B-size RAM® Twist-Lock™ suction cup base, a medium-length socket arm, and a RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series.
With the quick-release tab, simply push the tab to dismount the tablet without having to adjust the mount itself. The RAM-B-224-1U suction cup base consists of a 3.3" diameter RAM® Twist-Lock™ suction cup connected to a RAM-B-238U diamond base with a 1" B-size rubber ball. The RAM® Twist-Lock™ suction cup base is a fan favorite for use on vehicle windshields and provides an extra-strong hold on any smooth, non-porous surface.
Features:
RAM® Twist-Lock™ suction cup base is ideal for vehicle windshields and other nonporous surfaces
includes a B-size medium-length socket arm and RAM® EZY-Mount™ Quick Release Adapter for OtterBox Hardline Series
Quick-release adapter with release tab for easy docking and removal of devices wrapped in an OtterBox Hardline Series case
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly hardware
Suction Size (inch) 3.3” diameter
Socket to Socket Length (inch): 3”
Hole Pattern (inch): 2-Hole AMPS: 1.912”
Ball Size (inch): B size (1”)
Weight Capacity: The standard use is 2.0 lb. and the heavy-duty use is 1 lb.
Materials: Marine-grade aluminum, high-strength composite, and cast acrylic
Weight: 0.75 lb.
|
41.06 |
|
|
Double Suction Cup Base
RAM suction cups are regarded as one of the most impressive suction cups in
the world. The incredible holding power is surprising when considering how
most suction cups function. When two suction cups are used together the
performance is amazing. The RAM Double Suction Cup Base is an amazing
innovation in suction cup mounting.
Features:
Double Suction Cup Base
Dual Suction Cups provide extra strength and stability
Dual Suction Cups for redundancy
High strength materials maximize longevity of the mount
Made in the U.S.A.
|
27.32 |
|
|
Suction Cup with Magnetic Mount f/dezl™780 LMT-S & dezlCam™785 LMT-S
Mount your compatible device while you navigate with this suction cup mount. The powered magnetic mount charges your device while you drive. Simply suction your mount to the windshield or any smooth, flat surface. Includes suction cup mount and magnetic mount.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
47.99 |
|
|
Tough-Charge™ Waterproof Wireless Charging Suction Cup Mount
The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi wireless phone charging. All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle and place your phone inside before releasing the arms. This Qi wireless charging cradle ensures your compatible phone charges no matter what position it’s placed at. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging suction cup kit includes a B size diamond base featuring a 1” rubber ball, medium length double socket arm, and RAM® Twist-Lock™ suction cup. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable.
Features:
Waterproof Qi wireless phone charging cradle features spring-loaded RAM X-Grip technology
Kit for vehicles includes wireless cradle, B size diamond ball base, medium double socket arm, RAM Twist-Lock suction cup, and extension cable
Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments
RAM Mounts backed by lifetime warranty, RAM electronics backed by 1-year warranty
Specifications:
Holder Dimensions: Width Range: 2.375" - 3.25", Depth Range: .875" max
Suction Size: " Diameter
Socket-to-Socket Length: 3"
Ball/Socket Size: B Size (1")
Materials: Marine-grade aluminum high strength composite stainless steel
Hardware Included:
(1) Safety Tether
(1) Glue Tube for Rubber Caps
(1) Cradle Leg
(1) Cradle Leg Cover
(1) Silicon sleeve for USB waterproof connection
(1) 1.2 Meter USB Extension Cable
|
101.17 |
|
|
SUP, Kayak & Dinghy Pack with Suction Cup Installation
The Navilight dual kit is the ready-to-go solution whenever it is needed to exhibit an all-around white light and sidelights. The all-around white light as well as the Tricolor light are equipped with a dual function suction mount - holding either the Navilights, a GoPror/Action camera or any other accessory utilizing the mounting bracket.
Contains the lights and mountings needed to equip most boats up to 12m with Navigation lights in compliance with 72 COLREGs - if the boats infrastructure allows, that the Masthead light can be positioned at least 1 m (3.3 ft) above the sidelights.
On a power-driven vessel of 12 meters or more in length but less than 50 meters in length:
As green or red sidelight
As sternlight
All-round white light
On a power-driven vessel of less than 12 meters in length:
As green or red sidelight
As combined green/red
As sternlight
Masthead light
Sternlight
On a sailing vessel underway:
As green or red sidelight
As sternlight
All-round white light
On a sailing vessel of less than 20 meters in lengths as backup light:
TriColor lantern at or near the top of the mast
Vessel under oars
All-round white light
Anchored vessels and vessels aground
Anchor lights must always be shown from sunset to sunrise
All-round white light
Specifications:
USCG Approval, 2 Nautical Miles
Includes dual function suction mount - holds Navilight or GoPro®/Action camera or any other accessory utilizing the mounting bracket
Floats light facing up
Submersible to 20 m
Corrosion resistant
2x "3M VHB" self-adhesive "landing pad" to securely attach the light on abrasive surfaces
2x "3M VHB" self-adhesive curved "landing pad" to securely attach the light on inflatable boats
2x neoprene stow away bags
Each light powered by three AAA batteries (not included)
Size (each light): H = 95 mm, O = 68 mm
Weight (each light, net): 141 g
|
153.41 |
|
|
RAM® Twist-Lock™ Composite Suction Cup Ratchet Mount with Socket Arm
The RAP-B-104-224U-QU1, composite, ratchet/pivot, suction cup mount is a low profile, light weight and secure suction cup mount that is perfect for securing electronic devices in your mobile environment. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your electronic device in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device.
Features:
Assembly Hardware Included
Suction Size: 3.3" Diameter
Ball/Socket Size: B Size (1")
Weight Capacity: 2lbs
Materials: High Strength Composite
|
22.19 |
|
|
RAM® Twist-Lock™ Composite Suction Cup Ratchet Mount with Diamond Plate
The RAP-B-104-224U, composite, ratchet/pivot, suction cup mount is a low profile, light weight and secure suction cup mount that is perfect for securing electronic devices in your mobile environment. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your electronic device in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device.
Features:
Assembly Hardware Included
Suction Size: 3.3" Diameter
Hole Pattern: 2-Hole AMPS: 1.912"
Ball/Socket Size: B Size (1")
Weight Capacity: 2lbs
Materials: High Strength Composite
|
24.38 |
|
|
RAM® Quick-Grip™ Suction Cup Mount for Apple MagSafe Compatible Phones
The RAM® Quick-Grip™ product line gets an Apple MagSafe Charger compatible insert. Designed specifically to fit the official Apple MagSafe Charger, this RAM® Quick-Grip™ phone holder has a removable backing plate so you can install your Apple MagSafe Charger directly into the holder with the ability to adjust the positioning of the charging disk depending on your iPhone 12 model iPhone. This insert allows a perfect and secure fit for the MagSafe's charging disk and is only compatible with the iPhone 12, 12 Pro, 12 Pro Max, and 12 mini with or without an official Apple MagSafe case. Included in this kit is the RAM® Twist-Lock™ B size suction cup base with B size medium length socket arm, perfect for windshield mounting in your vehicle. Take advantage of your iPhone 12's magnetic MagSafe charging abilities with this MagSafe mount.
Features:
Kit includes RAM® Quick-Grip™ Holder for Apple MagSafe Charger, B size diamond ball base, short double socket arm, and RAM® Twist-Lock™ suction cup base ideal for vehicle windshields; MagSafe Charger not included
Compatible with iPhone 12 and 13 series, Pro and Pro Max, with or without Apple MagSafe phone cases; not compatible with standard phone cases
RAM® Quick-Grip™ Holder has a removable backing plate to adjust the positioning of the MagSafe Charger
Backed by a lifetime warranty
Specifications:
HARDWARE INCLUDED: Assembly Hardware (1) Safety Tether
SUCTION SIZE: 3.3" Diameter
SOCKET-TO-SOCKET LENGTH: 3"
BALL/SOCKET SIZE: B Size (1")
WEIGHT CAPACITY: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
MATERIALS: Marine-grade aluminum, High strength composite
WEIGHT: 0.95 lbs.
ADDITIONAL INFORMATION: Exposure to vibrations, like those generated by high-powered motorcycle engines, might impact iPhone cameras.
|
74.23 |
|
|
RAM® Twist-Lock™ Suction Cup Mount for Apple iPad mini 4 & 5
Ideal for aircraft windshields, the RAM® EZ-Roll'r™ cradle is designed specifically for a caseless Apple iPad mini 4 and iPad mini 5 consisting of a 3.3" diameter RAM® Twist-Lock™ suction cup base and medium-length double socket arm. The mount is designed with a RAM® 1" diameter B size patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.
Features:
RAM® EZ-Roll'r™ cradle specifically designed for a caseless Apple iPad mini 4 and iPad mini 5
Includes RAM® Twist-Lock™ suction cup base for mounting to windshields and other nonporous surfaces as well as a B-size medium socket arm
Made of powder-coated, marine-grade aluminum and high-strength composites for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware
Suction Size: 3.3" Diameter
Socket to Socket Length: 3"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2lbs/Heavy Duty Use: 1lb
Materials: Marine-grade aluminum, high-strength composite
Weight: 0.87lb
Compatibility:
Apple iPad mini 4
Apple iPad mini 5
|
48.68 |
|
|
Powered Suction Cup Mount with Speaker
Garmin's premium suction cup mount provides easy viewing of your 5" device. It includes a speaker with the highest sound quality in the nüvi® lineup so voice prompts come through clearer. Mount can be attached to your windshield or any smooth, flat surface.
Mount and power your nüvi® device with this powered suction cup mount. Included speaker provides clear voice prompts.
Compatible Devices:
nüvi® 3550LM
nüvi® 3590LMT
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.08 |
|
|
Portable Suction Cup Bracket for All HS Transducers
Suction cup brackets let you go portable with your Vexilar color flasher. The suction cup holds firmly to the back of the boat, yet allows easy removal when required. Great for rental boats, fishing in a friends boat, or if you need to store your boat where theft is a concern.
Features:
Dual large 4" suction cups
Polyethylene bracket won't rust
Secure hold at high speeds
Includes safety rope
Made in the USA
Transducer and transducer mounting hardware not included
Specifications:
Polyethylene Construction
3 foot rope length
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.80 |
|