Wired Shore Power Sensor Plug The Shore Power Sensor Plug allows boaters to monitor system-critical shore power from anywhere. Receive an alert in the event that shore power is lost and avoid costly system shutdown. The Shore Power Sensor Plug is ideal for larger vessels relying on external power sources to run critical systems while on the dock. Specifications: Dimensions: 3ft (wire) 2.5x1.5in (body) Standard AC to DC adapter, 3V DC output Plugs into AC outlet Works with MTC and Siren 3 Pro

Shore Power Relay - 240V The 240VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel. This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 240VAC systems. Features: Coil Voltage: 240VAC Contact Current: 10A Works with MTC and Siren 3 Pro

120V AC Shore Power Relay - Wired The 120VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel.  This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 120VAC systems. Features: Coil Voltage: 120VAC Contact Current: 10A

Wired Infrared Motion Sensor The Visonic 360 Ceiling Dualtech motion sensor offers robust protection against theft. Simply mount this sensor in a cabin or above the main entryway, and receive notification in the event of unauthorized entry. The sensor can also be programmed to sound an audible alarm. Featuring a sleek, compact, and elegant design, the sensor blends seamlessly into any décor. Visonic technology assures high reliability, false alarm immunity, and 360-degree coverage. Ideal for monitoring unexposed areas such as pilothouse, galley, cabin, etc. Specifications: Dimensions: 3.37in (diameter) 1in (depth) Ceiling Mount Range:  360° detection pattern with floor coverage up to 36ft Supply Voltage: 9-12V Not recommended for use on weather/exposed decks Works with MTC and Siren 3 Pro

100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - 75' All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.  Features: For use with 100 amp 120V/208V shore power systems  High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)  Ergonomic non-slip TPE coated gripping surfaces  IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant.  Feature integrated locking rings.  Internal frame terminals provide high clamping force for safe and secure contact  Options for use with on-board isolation transformers and male plug only power supply purposes  UL and ABYC approved components Specifications: Length: 75' Neutral Wire: No Female End: Yes Application: Isolation transformer cordset Color: Yellow WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - 100' All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.  Features: For use with 100 amp 120V/208V shore power systems  High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)  Ergonomic non-slip TPE coated gripping surfaces  IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant.  Feature integrated locking rings.  Internal frame terminals provide high clamping force for safe and secure contact  Options for use with on-board isolation transformers and male plug only power supply purposes  UL and ABYC approved components Specifications: Length: 100' Neutral Wire: No Female End: Yes Application: Isolation transformer cordset Color: Yellow WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - One-Ended Male Only Cord - Blunt Cut - 125' All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.  Features: For use with 100 amp 120V/208V shore power systems  High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)  Ergonomic non-slip TPE coated gripping surfaces  IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant.  Feature integrated locking rings.  Internal frame terminals provide high clamping force for safe and secure contact  Options for use with on-board isolation transformers and male plug only power supply purposes  UL and ABYC approved components Specifications: Length: 125' Neutral Wire: No Female End: No, Blunt Cut Application: Cable Winch with Isolation Transformer Color: Yellow WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

100 Amp 125/250V 3-Pole, 4-Wire Shore Power Cordset - Neutral Wire - One-Ended Male Only - Blunt Cut - 75' All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.  Features: For use with 100 amp 125V/250V shore power systems  High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)  Ergonomic non-slip TPE coated gripping surfaces  IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.  Internal frame terminals provide high clamping force for safe and secure contact  Options for use with on-board isolation transformers, male plug only power supply, and extension purposes  UL and ABYC approved components Specifications: Length: 75' Neutral Wire: Yes Female End: No, Blunt Cut Application: Cable Winch Color: Yellow WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

100 Amp 120/208V 4-Pole, 5-Wire Shore Power Cable - No Neutral Wire - One-Ended Male Only Cord - Blunt Cut - 100' All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.  Features: For use with 100 amp 120V/208V shore power systems  High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)  Ergonomic non-slip TPE coated gripping surfaces  IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant.  Feature integrated locking rings.  Internal frame terminals provide high clamping force for safe and secure contact  Options for use with on-board isolation transformers and male plug only power supply purposes  UL and ABYC approved components Specifications: Length: 100' Neutral Wire: No Female End: No, Blunt Cut Application: Cable Winch with Isolation Transformer Color: Yellow WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

OnDeck™ Shore Power Sensor  Monitor the status of your shore power remotely using the OnDeck™ Hub and this sensor. Connect this accessory to an electrical outlet and your OnDeck Hub to get started. Compatible with North America, Europe, U.K., and Australia standard electrical outlets from 100 Vac to 240 Vac.

100 Amp 125/250V 3-Pole, 4-Wire Shore Power Cordset - Neutral Wire - Female End - 75' All Marinco cordsets are made of the highest quality, marine grade construction with features you won’t find on other power cords.  Features: For use with 100 amp 125V/250V shore power systems  High visibility, 2 AWG, flexible yellow STOW cable is oil, water, UV resistant, and rated to 221°F (105°C)  Ergonomic non-slip TPE coated gripping surfaces  IEC pin and sleeve plugs and connectors are designed for harsh environments, watertight, and corrosion resistant. Feature integrated locking rings.  Internal frame terminals provide high clamping force for safe and secure contact  Options for use with on-board isolation transformers, male plug only power supply, and extension purposes  UL and ABYC approved components Specifications: Length: 75' Neutral Wire: Yes Female End: Yes Application: Standard Cordset Color: Yellow WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

16 AWG Striped Marine Wire - Brown with White Stripe - 600 Voltage Rating Striped wire is great for situations where someone is dealing with a large number of wires. Using striped wire makes identification easier. This, in turn, can increase job efficiency. All of Pacer's 16 AWG striped marine wire is manufactured in Sarasota, FL, USA, from Type III Class K tinned copper. During the production process, the copper conductors are jacketed with PVC insulation. This jacket is designed to be durable and flexible. All of Pacer's primary striped wire meets the requirements and standards of UL, ABYC, and NMMA.  Features: Stranded, tinned copper conductors Highly flexible, color-coded insulation Annealed Finely Stranded Tinned Copper ASTM B172 Class K Resistant to: Acid, alkali, abrasion, flame, gasoline, oil, and moisture Applications: Point-to-point wiring  Internal wiring of panels and motors Characteristics: Insulation: -20 degrees C to 105 degrees C flexible, color-coded PVC Temperature Rating: 105 degrees C Dry, 75 degrees C Wet, 60 degrees C Oil Voltage Rating: 600-V AWG: 16 Cond. Stranding: 26/.0100 Nom. Ins. Thickness: 0.032 Nom. O.D: 0.125 Nom. Circular Mils: 2600 Approx. LB/M: 14.8 Compliances: UL Standard 1426 (BC-5W2) AWM 1015/1230 MTW, CSA: TEW ABYC: E-8.14, E-9.14, Coast Guard: 33 CFR part183

16 AWG Gauge Striped Marine Wire 500' Spool - Black with Red Stripe Striped wire is great for situations where someone is dealing with a large number of wires. Using striped wire makes identification easier. This, in turn, can increase job efficiency. All of Pacer's 16 AWG striped marine wire is manufactured in Sarasota, FL, USA, from Type III Class K tinned copper. During the production process, the copper conductors are jacketed with PVC insulation. This jacket is designed to be durable and flexible. All of Pacer's primary striped wire meets the requirements and standards of UL, ABYC, and NMMA. How many options of 16 AWG striped marine wire does Pacer offer? The most important thing when selecting the proper striped wire is choice. By offering an enormous section, users are guaranteed to find the perfect choice. Currently, there are over 100 possible combinations of 16 AWG striped marine wires. Have a question about striped marine wire? Contact a Pacer expert today. This particular black marine wire has a red stripe and comes in a 500 ft. spool. Features: Stranded, tinned copper conductors Highly flexible color-coded insulation Annealed Finely Stranded Tinned Copper ASTM b172 Class K Resistant to: Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Specifications: Spool Length: 500  ft. Insulation: -20 degrees C to 105 degrees C Flexible, Color Coded PVC Temperature Rating: 105 degrees C Dry, 75 degrees C Wet, 60 degrees C Oil Voltage Rating: 600-V Applications: Point-to-point wiring Internal wiring of panels and motors Compliances: UL Standard 1426 (BC-5W2) AWM 1015/1230 AWM 1028/1231 MTW, CSA: TEW ABYC: E-8.14, E-9.14, Coast Guard: 33 CFR part183

16 AWG Gauge Striped Marine Wire 1000' Spool - Black with Red Stripe Striped wire is great for situations where someone is dealing with a large number of wires. Using striped wire makes identification easier. This, in turn, can increase job efficiency. All of Pacer's 16 AWG striped marine wire is manufactured in Sarasota, FL, USA, from Type III Class K tinned copper. During the production process, the copper conductors are jacketed with PVC insulation. This jacket is designed to be durable and flexible. All of Pacer's primary striped wire meets the requirements and standards of UL, ABYC, and NMMA. How many options of 16 AWG striped marine wire does Pacer offer? The most important thing when selecting the proper striped wire is choice. By offering an enormous section, users are guaranteed to find the perfect choice. Currently, there are over 100 possible combinations of 16 AWG striped marine wires. Have a question about striped marine wire? Contact a Pacer expert today. This particular black marine wire has a red stripe and comes in a 1000 ft. spool. Features: Stranded, tinned copper conductors Highly flexible color-coded insulation Annealed Finely Stranded Tinned Copper ASTM b172 Class K Resistant to: Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Specifications: Spool Length: 1000  ft. Insulation: -20 degrees C to 105 degrees C Flexible, Color Coded PVC Temperature Rating: 105 degrees C Dry, 75 degrees C Wet, 60 degrees C Oil Voltage Rating: 600-V Applications: Point-to-point wiring Internal wiring of panels and motors Compliances: UL Standard 1426 (BC-5W2) AWM 1015/1230 AWM 1028/1231 MTW, CSA: TEW ABYC: E-8.14, E-9.14, Coast Guard: 33 CFR part183

16 AWG Gauge Striped Marine Wire 500' Spool - Blue with White Stripe Striped wire is great for situations where someone is dealing with a large number of wires. Using striped wire makes identification easier. This, in turn, can increase job efficiency. All of Pacer's 16 AWG striped marine wire is manufactured in Sarasota, FL, USA, from Type III Class K tinned copper. During the production process, the copper conductors are jacketed with PVC insulation. This jacket is designed to be durable and flexible. All of Pacer's primary striped wire meets the requirements and standards of UL, ABYC, and NMMA. How many options of 16 AWG striped marine wire does Pacer offer? The most important thing when selecting the proper striped wire is choice. By offering an enormous section, users are guaranteed to find the perfect choice. Currently, there are over 100 possible combinations of 16 AWG striped marine wires. Have a question about striped marine wire? Contact a Pacer expert today. This particular blue marine wire has a white stripe and comes in a 500 ft. spool. Features: Stranded, tinned copper conductors Highly flexible color-coded insulation Annealed Finely Stranded Tinned Copper ASTM b172 Class K Resistant to: Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture Specifications: Spool Length: 500 ft. Insulation: -20 degrees C to 105 degrees C Flexible, Color Coded PVC Temperature Rating: 105 degrees C Dry, 75 degrees C Wet, 60 degrees C Oil Voltage Rating: 600-V Applications: Point-to-point wiring Internal wiring of panels and motors Compliances: UL Standard 1426 (BC-5W2) AWM 1015/1230 AWM 1028/1231 MTW, CSA: TEW ABYC: E-8.14, E-9.14, Coast Guard: 33 CFR part183