|
180° Adjustable Angle Adapter
Attach your favorite Swobbit cleaning tool to one end, snap it onto the Perfect Pole Telescoping Handle and let the cleaning begin. Makes cleaning areas normally inaccessible with conventional tools and adapters easy to reach.
Features:
Adjustable to 180°
Eliminates unsafe and awkward positions
Reduces overextending and user fatigue when cleaning
*Sold as an Individual
|
10.42 |
|
|
RAA100 NMEA 2000®Rudder Angle Adapter
The RAA100 is used to adapt commercially available resistive rudder angle senders to the NMEA 2000® network. This allows you to observe rudder angle anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM200.
The RAA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the RAA100 can be calibrated for any resistance between 0 and 300 ohms.
You can also use the RAA100 with existing analog gauges so you don't have to give up your existing analog gauges to enjoy the advantages of digitally networked information.
Features:
Rudder Angle
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
296.64 |
|
|
Stainless Steel & Nylon Hinge Adjustable Angle
These Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Concave Hinges are designed to rail mount on 1” tubing. Angled Hinges are used for mounting items on slanted surfaces like sloped gunwales. 180° Adjustable Hinge allows universal mounting at almost any angle including vertical mounting. Removable Pin Deck Hinges feature a spring loaded quick release pin for easy top removal. 1/4” or 5/16” pin size. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with two FH fasteners (not included).
|
12.00 |
|
|
Deluxe High Powered LED Overhead Light Adjustable Angle - 304 Stainless Steel
The Deluxe High Power LED Overhead Light features excellent light dispersion and brightness, making it ideal for all accent lighting in cabins, walkways, cockpits, and interior compartments. This light features an adjustable angle to direct light where needed. Spring mounted to fit in a 1-13/16” hole. Constructed of corrosion resistant stamped 304 stainless steel. 180 lux. 12-28 VDC.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
77.48 |
|
|
ST-Ng Right Angle Adapter
This is a 90°, right angle spur connector. Used for the multifunction displays.
|
30.67 |
|
|
12" Adjustable Angle LED Light Bar - w/Push Button Switch - 12VDC - Warm White
Lunasea Lightings Cambered Linear LED Light is perfect for installation in areas that need lots of light. Thin design allows for installation in tight areas and allows for adjustable direction of light. The direction of LED light can be adjusted to 0°, 45°and 90°. Linkable to 7'.
Specifications:
Voltage: 10-18VDC
Power: 11.8"(300mm) - 5W
IP Rating: 20
Width: 1.3"(33mm)
Height: 0.37"(9.5mm)
Mounting: 2 M3 x 10 Screws
|
39.52 |
|
|
Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow.
Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available.
All-new sleek, modern design.
First all modular system - extremely versatile.
Easy to select and install for any radar, dome, light or camera combination.
Easy to add accessories.
Upgradable for future additions and modifications.
Powder coated aluminum construction
Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer.
The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."
See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )
Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.
SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686
|
|
|
Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.
The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces!
For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.
SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html
Specials Closeouts Remanufactured Rebates
|
|
|
Adapter Cable Right Angle
RealVision™ 3D Transducer right-angled adapter cable 400 mm (15.7 in.) Right angled RV transducer adapter cable for installations where space behind the display is limited.
|
97.14 |
|
|
Micro Fiber Chenille and Adapter
A professional wash made quick and easy. Holds plenty of soap and water.
Not recommended for non-skid or rough surfaces.
*Includes adapter and bonnet
Features:
Over 70 sq. inches of cleaning surface
Safe for all finishes including paint, fiberglass, windows and enclosures
Dual-axis swivel head follows curves and contours for quick washing
Uses replacement bonnets SW19175
*Sold as an Individual
|
25.28 |
|
|
Pontoon Square Rail Adjustable Clamp On Rod Holder
All the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices.
Our clamp fits 1" to 1-1/4" square rail
Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp
Angle around the rail is infinitely adjustable
Angle to the left or right adjusts in 15 degree increments
9" tall tube with 1-5/8" ID
Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
59.21 |
|
|
Adjustable In-Hull Transducer
600 Watt adjustable angled in hull transducer. (P79)
Compatible with the following Echo Sounders:
SL Series: SL755RC, SL760RC , SL1250, and SL1250RC
hsb2 Plus Series: L755RC, L760, L760RC, L1250,and L1250RC
hsb2 HDFI Series: DSM250, L770D, L770DRC, L1260D, and L1260DRC
Compatible hull material: fiberglass
Max Power: 600 W
Frequency: 200/50 kHz
Beam Angles: 200 kHz 11 50 kHz 45
Features:
Depth only.
Can be used in conjunction with the E66019 ST69 speed and temperature sensor
Easily adjusts to any deadrise angle up to 22
Transmits sound waves directly at the bottom so strong echoes are reflected back to the transducer
Can be removed in seconds for servicing or storage
Only the base piece is bonded to the hull. There is no adhesive layer under the transducer face to absorb sound energy
Simplifies in-hull installation
30ft (10m) Cable
|
209.98 |
|
|
P79S Smart™ Sensor with SeaTalkNG Adapter with A80373 & A06045
The P79S brings depth intelligence to your boat. Featuring Airmar’s Smart™ Sensor technology, the P79S delivers processed depth data right to the onboard network for multiple displays to use.
The P79S includes a plastic mounting base that is aligned to the centerline and secured inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the base and adjusted for the proper deadrise offset, ensuring the beam will be shooting straight down for maximum echo returns. The antifreeze provides the best medium to transmit through solid fiberglass and into the surrounding water. The major benefit of an in-hull transducer is no protruding features on the exterior of the hull, making it the perfect choice for trailered or lifted boats. Designed for smaller boats up to 8 m (25') with a solid fiberglass hull.
Airmar's Smart Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth data is a single cable into a compatible network or display. Available as an analog sensor or a digital Smart Sensor that can output in the NMEA 0183 or NMEA 2000® format.
Features:
Depth only
60 W
235 kHz frequency prevents mutual interference with other echo sounders on the vessel
7° beamwidth
Depth range:
NMEA 0183 model has a maximum depth of 100 m (330')
NMEA 2000 model has a maximum depth of 150 m (500')
Installed with a hand-adjustable base. No cutting is needed.
NMEA 2000 certified cable assembly
No holes to drill
In-hull installation can be done while the boat is in the water
Urethane transducer with adjustable, plastic, mounting base
Available in NMEA 0183 or NMEA 2000 standard
NMEA 2000 certified or NMEA 0183 cable
Installed with a hand-adjustable base
No cutting is needed
|
389.99 |
|
|
MX7000CR
Adjustable Angle holders MX7000CR (1-1/2" ID) are our strongest and most versatile holders. The three point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main tube of this unit is designed to accept the outrigger in either end so the holder can be mounted above or below any flat surface. A fast pin can be substituted for the bolt connecting the clamp to the wing for bridge laydown capability. Approximate area required for mounting is 14-1/2" x 18".
Recomended poles for MX7000CR
AO8716CR - 16 ft Center Rigger (Mk II)
AO8718CR - 18 ft Center Rigger (Mk II)
MX8712CR - 12 ft MX Step- Tube Style
MX8715CR - 15 ft MX Step- Tube Style
MX8718CR - 18 ft MX Step- Tube Style
MX8716CX - 16 ft MX Step- Tube Style - Single Spreader
MX8720CX - 20 ft MX Step- Tube Style - Double Spreader
|
502.62 |
|
|
MX8000CR
Adjustable Angle holders MX8000CR (1-5/8" ID) are our strongest and most versatile holders. The three-point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main tube of this unit is designed to accept the outrigger in either end so the holder can be mounted above or below any flat surface. A fast pin can be substituted for the bolt connecting the clamp to the wing for bridge laydown capability. Approximate area required for mounting is 14-1/2" x 18".
Recommended poles for MX8000CR
MX8719CR - 19 ft MX Step- Tube Style
MX8716CX - 16 ft MX Step- Tube Style - Single Spreader
MX8719CX - 19 ft MX Step- Tube Style - Single Spreader
MX8720CX - 20 ft MX Step- Tube Style - Double Spreader
MX8722CX - 22 ft MX Step- Tube Style - Single Spreader or Double Spreader
|
516.32 |
|